Alfredo, Em 30-04-2011 14:09, Alfredo Jesús Delaiti escreveu: > Hi > > I'm trying to make the driver for X8507 Mygica. > I have reference to the Mygica X8506 card, because I found that only differ in the "frontend" according to photos I've seen on the Internet. > > I am following the recommended process: > > http://www.linuxtv.org/wiki/index.php/Development:_How_to_add_support_for_a_device > drivers/media/video/cx23885/cx23885-cards.c:240:3: error: ‘CX23885_BOARD_MYGICA_X8507’ undeclared here (not in a function) You forgot to declare this constant somewhere with #define. > Clarification: I am not a programmer and am trying to get to work compared with other controller. I am using the kernel 2.6.38 and OpenSUSE 11.4 > I attached the modified file It is not that simple. You need to setup the GPIO pins of your device, and set the DVB frontend according to how this is wired inside the board, and providing the information about the used frontend. I think that your device is based on mb86a20s demod. You need to tell that to cx23885-dvb, providing the type of connection used (serial or parallel). It requires you some knowledge about Engineering, as well as C programming experience. Mauro. -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html