On Tue, Apr 26, 2011 at 12:53 AM, Hans Verkuil <hverkuil@xxxxxxxxx> wrote: > > OK, whatever is causing the problems is *not* msp3400 since your card does not > have one :-) > > This card uses gpio to handle audio. > >> i2c-core: driver [tuner] using legacy suspend method >> i2c-core: driver [tuner] using legacy resume method >> tuner 0-0061: chip found @ 0xc2 (bt878 #0 [sw]) >> tuner-simple 0-0061: creating new instance >> tuner-simple 0-0061: type set to 2 (Philips NTSC (FI1236,FM1236 and >> compatibles)) > > It is more likely to be the tuner driver. But I would have expected to see > more bug reports since this is a bog-standard tuner so I have my doubts there > as well. > > Regards, > > Hans > After today, basically I have proved that the issue only happens if both the radeon and the bttv drivers are both loaded at suspend. If I boot without radeon, but load bttv, I can suspend and resume the tv card just fine. If I load radeon and when going to suspend unload bttv, I can then resume and load bttv just fine. This behavior started sometime after v2.6.36. It will be hard to pin point a problem in either since both have problems in 2.6.37-rc, where bttv has multiple issues during that time frame that cause oopses, and in other places loading radeon causes a lockup. So I think this will take me a different direction now, and it would be nice to know what changed related to all this. Jesse -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
