Hello, my Zolid Hybrid TV Tuner (http://www.linuxtv.org/wiki/index.php/Zolid_Hybrid_TV_Tuner) is supposed to work thanks to a merged patch mentioned at the wiki page. The creator of this patch states that DVB-T, analog and (later on the thread) FM are working (http://article.gmane.org/gmane.linux.drivers.video-input-infrastructure/9721/match=zolid). Well, for me the analog reception does not work. DVB works fine, although the reception could be improved. My dmesg spits out lots of error messages I don't understand: Apr 25 23:58:25 sander-desktop kernel: [ 2055.642093] Linux video capture interface: v2.00 Apr 25 23:58:25 sander-desktop kernel: [ 2055.651741] saa7130/34: v4l2 driver version 0.2.16 loaded Apr 25 23:58:25 sander-desktop kernel: [ 2055.651780] saa7133[0]: found at 0000:05:00.0, rev: 209, irq: 16, latency: 64, mmio: 0xfebff800 Apr 25 23:58:25 sander-desktop kernel: [ 2055.651787] saa7133[0]: subsystem: 1131:2004, board: Zolid Hybrid TV Tuner PCI [card=173,autodetected] Apr 25 23:58:25 sander-desktop kernel: [ 2055.651809] saa7133[0]: board init: gpio is 0 Apr 25 23:58:25 sander-desktop kernel: [ 2055.830036] saa7133[0]: i2c eeprom 00: 31 11 04 20 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 Apr 25 23:58:25 sander-desktop kernel: [ 2055.830050] saa7133[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff ff ff ff ff ff ff ff ff ff Apr 25 23:58:25 sander-desktop kernel: [ 2055.830061] saa7133[0]: i2c eeprom 20: 01 40 01 02 03 01 01 03 08 ff 00 b2 ff ff ff ff Apr 25 23:58:25 sander-desktop kernel: [ 2055.830073] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Apr 25 23:58:25 sander-desktop kernel: [ 2055.830084] saa7133[0]: i2c eeprom 40: ff 35 00 c0 96 10 03 32 21 05 ff ff ff ff ff ff Apr 25 23:58:25 sander-desktop kernel: [ 2055.830096] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Apr 25 23:58:25 sander-desktop kernel: [ 2055.830107] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Apr 25 23:58:25 sander-desktop kernel: [ 2055.830119] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Apr 25 23:58:25 sander-desktop kernel: [ 2055.830130] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Apr 25 23:58:25 sander-desktop kernel: [ 2055.830142] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Apr 25 23:58:25 sander-desktop kernel: [ 2055.830153] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Apr 25 23:58:25 sander-desktop kernel: [ 2055.830165] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Apr 25 23:58:25 sander-desktop kernel: [ 2055.830176] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Apr 25 23:58:25 sander-desktop kernel: [ 2055.830188] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Apr 25 23:58:25 sander-desktop kernel: [ 2055.830199] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Apr 25 23:58:25 sander-desktop kernel: [ 2055.830218] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Apr 25 23:58:25 sander-desktop kernel: [ 2055.931372] tuner 6-004b: chip found @ 0x96 (saa7133[0]) Apr 25 23:58:26 sander-desktop kernel: [ 2056.100032] tda829x 6-004b: setting tuner address to 60 Apr 25 23:58:26 sander-desktop kernel: [ 2056.173615] tda18271 6-0060: creating new instance Apr 25 23:58:26 sander-desktop kernel: [ 2056.261282] TDA18271HD/C2 detected @ 6-0060 Apr 25 23:58:28 sander-desktop kernel: [ 2058.650030] tda18271: performing RF tracking filter calibration Apr 25 23:59:01 sander-desktop kernel: [ 2091.680032] tda18271: RF tracking filter calibration complete Apr 25 23:59:01 sander-desktop kernel: [ 2091.790051] tda829x 6-004b: type set to tda8290+18271 Apr 25 23:59:09 sander-desktop kernel: [ 2099.850349] saa7133[0]: dsp access error Apr 25 23:59:09 sander-desktop kernel: [ 2099.850353] saa7133[0]: dsp access error Apr 25 23:59:09 sander-desktop kernel: [ 2099.980120] saa7133[0]: registered device video0 [v4l2] Apr 25 23:59:09 sander-desktop kernel: [ 2099.980160] saa7133[0]: registered device vbi0 Apr 25 23:59:09 sander-desktop kernel: [ 2099.980199] saa7133[0]: registered device radio0 Apr 25 23:59:09 sander-desktop kernel: [ 2099.987454] saa7134 ALSA driver for DMA sound loaded Apr 25 23:59:09 sander-desktop kernel: [ 2099.987498] saa7133[0]/alsa: saa7133[0] at 0xfebff800 irq 16 registered as card -2 Apr 25 23:59:10 sander-desktop rtkit-daemon[1618]: Successfully made thread 3949 of process 3764 (n/a) owned by '1000' RT at priority 5. Apr 25 23:59:10 sander-desktop rtkit-daemon[1618]: Supervising 4 threads of 1 processes of 1 users. Apr 25 23:59:10 sander-desktop kernel: [ 2100.066089] dvb_init() allocating 1 frontend Apr 25 23:59:11 sander-desktop kernel: [ 2101.471482] tda18271 6-0060: attaching existing instance Apr 25 23:59:11 sander-desktop kernel: [ 2101.471488] DVB: registering new adapter (saa7133[0]) Apr 25 23:59:11 sander-desktop kernel: [ 2101.471492] DVB: registering adapter 0 frontend 0 (NXP TDA10048HN DVB-T)... Apr 25 23:59:13 sander-desktop kernel: [ 2103.531278] tda18271_write_regs: [6-0060|M] ERROR: idx = 0xc, len = 4, i2c_transfer returned: -5 Apr 25 23:59:13 sander-desktop kernel: [ 2103.650026] tda18271_write_regs: [6-0060|M] ERROR: idx = 0x1, len = 7, i2c_transfer returned: -5 Apr 25 23:59:13 sander-desktop kernel: [ 2103.650032] tda18271_channel_configuration: [6-0060|M] error -5 on line 184 Apr 25 23:59:13 sander-desktop kernel: [ 2103.650038] tda18271_set_analog_params: [6-0060|M] error -5 on line 1045 Apr 25 23:59:14 sander-desktop kernel: [ 2104.950042] tda18271_write_regs: [6-0060|M] ERROR: idx = 0xc, len = 4, i2c_transfer returned: -5 Apr 25 23:59:15 sander-desktop kernel: [ 2105.110067] tda18271_write_regs: [6-0060|M] ERROR: idx = 0x1, len = 7, i2c_transfer returned: -5 Apr 25 23:59:15 sander-desktop kernel: [ 2105.110074] tda18271_channel_configuration: [6-0060|M] error -5 on line 184 Apr 25 23:59:15 sander-desktop kernel: [ 2105.110079] tda18271_set_analog_params: [6-0060|M] error -5 on line 1045 Apr 25 23:59:15 sander-desktop kernel: [ 2105.250032] tda10048_firmware_upload: waiting for firmware upload (dvb-fe-tda10048-1.0.fw)... Apr 25 23:59:15 sander-desktop kernel: [ 2105.252036] tda10048_firmware_upload: firmware read 24878 bytes. Apr 25 23:59:15 sander-desktop kernel: [ 2105.252039] tda10048_firmware_upload: firmware uploading Apr 25 23:59:20 sander-desktop kernel: [ 2110.930042] tda18271_write_regs: [6-0060|M] ERROR: idx = 0x25, len = 1, i2c_transfer returned: -5 Apr 25 23:59:20 sander-desktop kernel: [ 2110.930048] tda18271_channel_configuration: [6-0060|M] error -5 on line 119 Apr 25 23:59:20 sander-desktop kernel: [ 2110.930055] tda18271_set_analog_params: [6-0060|M] error -5 on line 1045 Apr 25 23:59:21 sander-desktop kernel: [ 2111.210052] tda18271_write_regs: [6-0060|M] ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5 Apr 25 23:59:21 sander-desktop kernel: [ 2111.210057] tda18271_init: [6-0060|M] error -5 on line 830 Apr 25 23:59:21 sander-desktop kernel: [ 2111.210060] tda18271_tune: [6-0060|M] error -5 on line 908 Apr 25 23:59:21 sander-desktop kernel: [ 2111.210063] tda18271_set_analog_params: [6-0060|M] error -5 on line 1045 Apr 25 23:59:24 sander-desktop kernel: [ 2114.260042] tda10048_firmware_upload: firmware uploaded Apr 25 23:59:24 sander-desktop kernel: [ 2114.540222] tda18271_write_regs: [6-0060|M] ERROR: idx = 0x5, len = Worth noting is that some of those error messages are occuring on Hauppauge WinTV-HVR-1120 boards as well. Since this Zolid boards is much similar to the 1120, each boards' problems could be related to eachother. Honestly I don't have a clue what's going wrong on my machine, I suppose changes in the tda18271 code have broken the support. I'm running 2.6.35-25. Sander Pientka -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
