Gate could close after first I2C message. On stv0288 it does.
Keep 2nd and 3rd message I2C gate control alive.
Remove unnecessary gate closing in this module.
Signed-off-by: Malcolm Priestley <tvboxspy@xxxxxxxxx>
---
drivers/media/dvb/frontends/ix2505v.c | 10 ++++++----
1 files changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/media/dvb/frontends/ix2505v.c b/drivers/media/dvb/frontends/ix2505v.c
index 6c2e929..9a517a4 100644
--- a/drivers/media/dvb/frontends/ix2505v.c
+++ b/drivers/media/dvb/frontends/ix2505v.c
@@ -218,11 +218,13 @@ static int ix2505v_set_params(struct dvb_frontend *fe,
fe->ops.i2c_gate_ctrl(fe, 1);
len = sizeof(data);
-
ret |= ix2505v_write(state, data, len);
data[2] |= 0x4; /* set TM = 1 other bits same */
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+
len = 1;
ret |= ix2505v_write(state, &data[2], len); /* write byte 4 only */
@@ -233,12 +235,12 @@ static int ix2505v_set_params(struct dvb_frontend *fe,
deb_info("Data 2=[%x%x]\n", data[2], data[3]);
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+
len = 2;
ret |= ix2505v_write(state, &data[2], len); /* write byte 4 & 5 */
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 0);
-
if (state->config->min_delay_ms)
msleep(state->config->min_delay_ms);
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
