lsusb result is madhur@madhur-desktop:~$ lsusb Bus 005 Device 003: ID 12d1:140b Huawei Technologies Co., Ltd. EC1260 Wireless Data Modem HSD USB Card Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID eb1a:2860 eMPIA Technology, Inc. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub madhur@madhur-desktop:~$ Also when i am doing dmesg then it saying 712.469413] em28xx #0: Identified as Unknown EM2750/28xx video grabber (card=1) [ 712.480166] em28xx #0: found i2c device @ 0x4a [saa7113h] [ 712.491657] em28xx #0: found i2c device @ 0xa0 [eeprom] [ 712.496156] em28xx #0: found i2c device @ 0xc0 [tuner (analog)] [ 712.504280] em28xx #0: Your board has no unique USB ID. Waiting for your reply Thanks Madhur On Sat, Apr 9, 2011 at 9:51 PM, Another Sillyname <anothersname@xxxxxxxxxxxxxx> wrote: > On 09/04/2011, Madhur Jajoo <jajoo.madhur@xxxxxxxxx> wrote: >> Hi, >> >> I am using Ubuntu 10.10. I have Gadmei UTV300 USB TV Tuner card. >> >> When i am trying to do "dmesg" it saying card is detected as gadmei >> UTV330+ >> I have attached full log of the command. >> I am using tvtime software. I see that my tvtuner card is getting >> started (through LED) when i start tvtime. But it says "No signal". >> Can you please help me out of this ? >> >> Please find attached >> >> [ 3523.461728] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x274ad199 >> [ 3523.461731] em28xx #0: EEPROM info: >> [ 3523.461733] em28xx #0: No audio on board. >> [ 3523.461736] em28xx #0: 500mA max power >> [ 3523.461739] em28xx #0: Table at 0x06, strings=0x226a, 0x108c, 0x0000 >> [ 3523.472475] em28xx #0: Identified as Unknown EM2750/28xx video >> grabber (card=1) >> [ 3523.484848] em28xx #0: found i2c device @ 0x4a [saa7113h] >> [ 3523.499345] em28xx #0: found i2c device @ 0xa0 [eeprom] >> [ 3523.503842] em28xx #0: found i2c device @ 0xc0 [tuner (analog)] >> [ 3523.515217] em28xx #0: Your board has no unique USB ID. >> [ 3523.515222] em28xx #0: A hint were successfully done, based on i2c >> devicelist hash. >> [ 3523.515225] em28xx #0: This method is not 100% failproof. >> [ 3523.515228] em28xx #0: If the board were missdetected, please email >> this log to: >> [ 3523.515230] em28xx #0: V4L Mailing List <linux-media@xxxxxxxxxxxxxxx> >> [ 3523.515233] em28xx #0: Board detected as Gadmei UTV330+ >> [ 3523.876422] saa7115 1-0025: saa7113 found (1f7113d0e100000) @ 0x4a >> (em28xx #0) >> [ 3524.588691] All bytes are equal. It is not a TEA5767 >> [ 3524.588904] tuner 1-0060: chip found @ 0xc0 (em28xx #0) >> [ 3524.589567] tuner-simple 1-0060: creating new instance >> [ 3524.589572] tuner-simple 1-0060: type set to 69 (Tena TNF 5335 and >> similar models) >> [ 3524.624020] Registered IR keymap rc-gadmei-rm008z >> [ 3524.624199] input: em28xx IR (em28xx #0) as >> /devices/pci0000:00/0000:00:1d.7/usb1/1-7/rc/rc0/input7 >> [ 3524.624378] rc0: em28xx IR (em28xx #0) as >> /devices/pci0000:00/0000:00:1d.7/usb1/1-7/rc/rc0 >> [ 3524.636187] em28xx #0: Config register raw data: 0xc0 >> [ 3524.684030] em28xx #0: v4l2 driver version 0.1.2 >> [ 3525.176259] em28xx #0: V4L2 video device registered as video0 >> [ 3525.176266] em28xx #0: V4L2 VBI device registered as vbi0 >> >> Waiting for your reply. >> >> Thanks >> Madhur >> > Can you do a lsusb and report the results. > -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html