Hello *,
I'm new here, hope to be on the right list (crossposting from
linux-dvb@xxxxxxxxxxx which mailman told me is deprecated).
I'm trying to tune a AF9015, but w_scan finds only 4 tv services, while the
same dongle attached to the same antenna cable, on the same computer, with
Windows Media Center finds as much as 135 tv services.
The 4 services it finds are all from the same 205500 KHz transponder. Any clue?
Some details:
# lsusb
...
Bus 002 Device 002: ID 15a4:9016 Afatech Technologies, Inc. AF9015 DVB-T
USB2.0 stick
...
# dmesg
[ 6484.732102] usb 2-2: new high speed USB device using ehci_hcd and address 2
[ 6484.913877] IR NEC protocol handler initialized
[ 6484.915782] IR RC5(x) protocol handler initialized
[ 6484.918307] IR RC6 protocol handler initialized
[ 6484.920723] IR JVC protocol handler initialized
[ 6484.922643] IR Sony protocol handler initialized
[ 6484.925543] lirc_dev: IR Remote Control driver registered, major 250
[ 6484.926765] IR LIRC bridge handler initialized
[ 6485.285760] dvb-usb: found a 'Afatech AF9015 DVB-T USB2.0 stick' in cold
state, will try to load a firmware
[ 6485.318245] dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw'
[ 6485.385897] dvb-usb: found a 'Afatech AF9015 DVB-T USB2.0 stick' in warm
state.
[ 6485.386035] dvb-usb: will pass the complete MPEG2 transport stream to the
software demuxer.
[ 6485.386449] DVB: registering new adapter (Afatech AF9015 DVB-T USB2.0
stick)
[ 6485.404493] af9013: firmware version:4.95.0.0
[ 6485.408621] DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T)...
[ 6485.413124] tda18218: NXP TDA18218HN successfully identified.
[ 6485.415018] Registered IR keymap rc-empty
[ 6485.415127] input: IR-receiver inside an USB DVB receiver as
/devices/pci0000:00/0000:00:1d.7/usb2/2-2/rc/rc0/input13
[ 6485.415208] rc0: IR-receiver inside an USB DVB receiver as
/devices/pci0000:00/0000:00:1d.7/usb2/2-2/rc/rc0
[ 6485.415212] dvb-usb: schedule remote query interval to 500 msecs.
[ 6485.415216] dvb-usb: Afatech AF9015 DVB-T USB2.0 stick successfully
initialized and connected.
[ 6485.423782] usbcore: registered new interface driver dvb_usb_af9015
[ 6485.440130] usbcore: registered new interface driver usbhid
[ 6485.440134] usbhid: USB HID core driver
# uname -r
2.6.38-rc6
# lsmod | grep dvb
dvb_usb_af9015 19468 0
dvb_usb 15052 1 dvb_usb_af9015
dvb_core 86023 1 dvb_usb
rc_core 16999 9
ir_lirc_codec,ir_sony_decoder,ir_jvc_decoder,ir_rc6_decoder,dvb_usb_af9015,ir_rc5_decoder,ir_nec_decoder,dvb_usb
# w_scan -c IT -ft -X
w_scan version 20100316 (compiled for DVB API 5.1)
using settings for ITALY
DVB aerial
DVB-T Europe
frontend_type DVB-T, channellist 4
output format czap/tzap/szap/xine
Info: using DVB adapter auto detection.
/dev/dvb/adapter0/frontend0 -> DVB-T "Afatech AF9013 DVB-T": good :-)
Using DVB-T frontend (adapter /dev/dvb/adapter0/frontend0)
-_-_-_-_ Getting frontend capabilities-_-_-_-_
Using DVB API 5.2
frontend Afatech AF9013 DVB-T supports
INVERSION_AUTO
QAM_AUTO
TRANSMISSION_MODE_AUTO
GUARD_INTERVAL_AUTO
HIERARCHY_AUTO
FEC_AUTO
-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
Scanning 7MHz frequencies...
177500: (time: 00:00)
184500: (time: 00:03)
191500: (time: 00:05)
198500: (time: 00:08)
205500: (time: 00:10) (time: 00:13) signal ok:
QAM_AUTO f = 205500 kHz I999B7C999D999T999G999Y999
new transponder:
(QAM_64 f = 1600000 kHz I999B8C34D0T8G16Y0)
212500: (time: 00:26)
219500: (time: 00:29)
226500: (time: 00:31)
Scanning 8MHz frequencies...
474000: (time: 00:34)
482000: (time: 00:36)
490000: (time: 00:39)
498000: (time: 00:41)
506000: (time: 00:44)
514000: (time: 00:46)
522000: (time: 00:49)
530000: (time: 00:51)
538000: (time: 00:54)
546000: (time: 00:56)
554000: (time: 00:59)
562000: (time: 01:01)
570000: (time: 01:04)
578000: (time: 01:07)
586000: (time: 01:09)
594000: (time: 01:12)
602000: (time: 01:14)
610000: (time: 01:17)
618000: (time: 01:19)
626000: (time: 01:22)
634000: (time: 01:24)
642000: (time: 01:27) (time: 01:29)
650000: (time: 01:30)
658000: (time: 01:33)
666000: (time: 01:36)
674000: (time: 01:38)
682000: (time: 01:41)
690000: (time: 01:43)
698000: (time: 01:46)
706000: (time: 01:48)
714000: (time: 01:51)
722000: (time: 01:53)
730000: (time: 01:56)
738000: (time: 01:59)
746000: (time: 02:01)
754000: (time: 02:04)
762000: (time: 02:06)
770000: (time: 02:09)
778000: (time: 02:11)
786000: (time: 02:14)
794000: (time: 02:16)
802000: (time: 02:19)
810000: (time: 02:22)
818000: (time: 02:24)
826000: (time: 02:27)
834000: (time: 02:29)
842000: (time: 02:32)
850000: (time: 02:34)
858000: (time: 02:37)
tune to: QAM_AUTO f = 205500 kHz I999B7C999D999T999G999Y999
(time: 02:39) service = Rai 1 (RAI)
service = Rai 2 (RAI)
service = Rai 3 TGR Piemonte (Rai)
service = Rai Radio1 (RAI)
service = Rai Radio2 (RAI)
service = Rai Radio3 (RAI)
service = Rai News (Rai)
tune to: QAM_64 f = 1600000 kHz I999B8C34D0T8G16Y0
(time: 02:53) set_frontend:1703: ERROR: Setting frontend parameters failed
(API v5.x)
: 22 Invalid argument
tune to: QAM_64 f = 1600000 kHz I999B8C34D0T8G16Y0
(time: 02:53) set_frontend:1703: ERROR: Setting frontend parameters failed
(API v5.x)
: 22 Invalid argument
dumping lists (7 services)
Done.
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
