Hello, I'm having similar issue with another em28xx based analog tv tuner: USB KWorld PVR-TV 305U I will start separate thread for my issue Could you let me know what version of kernel and ALSA are you using? Thanks, tosiara Cite: ----------- Hi all, I have read serveral newsgroups about this problem and did not find any solution. The closest to a solution was a suggestion to install a em28xx-new module but it is no longer available. I have loaded em28xx em28xx-alsa and em28xx-dvb with this output ( I have forced the card on 56 using options em28xx card=56) [51556.500765] em28xx: New device USB 2881 Video @ 480 Mbps (eb1a:2881, interface 0, class 0) [51556.500949] em28xx #0: chip ID is em2882/em2883 [51556.687042] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 81 28 58 12 5c 00 6a 20 6a 00 [51556.687056] em28xx #0: i2c eeprom 10: 00 00 04 57 64 57 00 00 60 f4 00 00 02 02 00 00 [51556.687068] em28xx #0: i2c eeprom 20: 56 00 01 00 00 00 02 00 b8 00 00 00 5b 1e 00 00 [51556.687080] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 02 00 00 00 00 00 00 [51556.687091] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [51556.687102] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [51556.687114] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 20 03 55 00 53 00 [51556.687125] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 56 00 [51556.687137] em28xx #0: i2c eeprom 80: 69 00 64 00 65 00 6f 00 00 00 00 00 00 00 00 00 [51556.687148] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [51556.687160] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [51556.687171] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [51556.687182] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [51556.687194] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [51556.687205] em28xx #0: i2c eeprom e0: 5a 00 55 aa 79 55 54 03 00 17 98 01 00 00 00 00 [51556.687216] em28xx #0: i2c eeprom f0: 0c 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 [51556.687229] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xb8846b20 [51556.687232] em28xx #0: EEPROM info: [51556.687234] em28xx #0: AC97 audio (5 sample rates) [51556.687236] em28xx #0: USB Remote wakeup capable [51556.687238] em28xx #0: 500mA max power [51556.687241] em28xx #0: Table at 0x04, strings=0x206a, 0x006a, 0x0000 [51556.687915] em28xx #0: Identified as Pinnacle Hybrid Pro (card=53) [51556.690103] tvp5150 1-005c: chip found @ 0xb8 (em28xx #0) [51556.694727] tuner 1-0061: chip found @ 0xc2 (em28xx #0) [51556.694862] xc2028 1-0061: creating new instance [51556.694864] xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner [51556.694872] usb 2-6: firmware: requesting xc3028-v27.fw [51556.696352] xc2028 1-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 [51556.752531] xc2028 1-0061: Loading firmware for type=BASE (1), id 0000000000000000. [51557.679461] xc2028 1-0061: Loading firmware for type=(0), id 000000000000b700. [51557.693080] SCODE (20000000), id 000000000000b700: [51557.693088] xc2028 1-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000. [51557.900062] em28xx #0: Config register raw data: 0x58 [51557.900812] em28xx #0: AC97 vendor ID = 0xffffffff [51557.901178] em28xx #0: AC97 features = 0x6a90 [51557.901181] em28xx #0: Empia 202 AC97 audio processor detected [51558.050427] tvp5150 1-005c: tvp5150am1 detected. [51558.153287] em28xx #0: v4l2 driver version 0.1.2 [51558.237283] em28xx #0: V4L2 video device registered as /dev/video1 [51558.237287] em28xx #0: V4L2 VBI device registered as /dev/vbi1 [51558.250087] usbcore: registered new interface driver em28xx [51558.250092] em28xx driver loaded [51558.420877] xc2028 1-0061: attaching existing instance [51558.420881] xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner [51558.420884] em28xx #0/2: xc3028 attached [51558.420888] DVB: registering new adapter (em28xx #0) [51558.420893] DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)... [51558.421536] Successfully loaded em28xx-dvb [51558.421540] Em28xx: Initialized (Em28xx dvb Extension) extension [51558.421968] Em28xx: Initialized (Em28xx Audio Extension) extension [51560.520457] tvp5150 1-005c: tvp5150am1 detected. [51561.024168] tvp5150 1-005c: tvp5150am1 detected. [51561.332517] xc2028 1-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000. [51562.259446] (0), id 00000000000000ff: [51562.259452] xc2028 1-0061: Loading firmware for type=(0), id 0000000100000007. [51562.273059] xc2028 1-0061: Loading SCODE for type=MONO SCODE HAS_IF_5320 (60008000), id 0000000f0000000 I can get video. I see in alsa a third card (in fact I have a second internal TV capture card) But I cannot get sound out of it. I used mplayer to play TV. I did get no errors about opening the card but again no sound. I used this command : mplayer -tv immediatemode=0:outfmt=yuy2:width=768:height=576:adevice=hw.2,0:forceaudio:alsa:amode=1:norm=PAL:normid=5:chanlist=europe-west:freq=203.25:device=/dev/video1:input=0 tv:// (I also tried hw.1,0 or /dev/dsp(x) help greatly appreciated Thx W -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
