Please keep your replies on the mailing list. On Mar 7, 2011, at 6:00 PM, Me wrote: > Same problem. I purged both linux-headers-2.6.35-27-generic, > linux-source-2.6.35, then reinstalled them, and did an apt-get > update/upgrade. I then deleted media_build and ran... > > git clone git://linuxtv.org/media_build.git > cd media_build > ./build.sh > Compile breaks > vi vrl/.config changed CONFIG_DVB_FIREDTV=m to =n > ./build.sh > > ...same problem. Did I miss anything? Looks like the linux-media.tar.bz2 file that build.sh downloads needs to be updated to include the header still. Hans' change makes it so that will happen, but it hasn't yet. I suspect it'll get updated soon though. If you're impatient, just clone media_tree and within media_build/linux, do a 'make tar DIR=path/to/media_tree' and you can create your own. >> Mar 7, 2011 at 3:57 PM, Jarod Wilson <jarod@xxxxxxxxxxxx> wrote: >> On Mar 7, 2011, at 2:01 PM, Me wrote: >> >>> I had MythTV .23 up and running fine on Mythbuntu 10.10 and then >>> hosed it. I reinstalled it, and since then I can't get the drivers >>> for my Haupphauge 2250 to compile on kernel 2.6.35-22-generic. When I >>> figured it out last time I put it in a text file. Heres what I have >>> done. I have since updated to MythTV .24 and the problem persists. >>> >>> >>> wget http://www.steventoth.net/linux/hvr22xx/22xxdrv_27086.zip >>> wget http://www.steventoth.net/linux/hvr22xx/HVR-12x0-14x0-17x0_1_25_25271_WHQL.zip >>> wget http://www.steventoth.net/linux/hvr22xx/extract.sh >>> sh extract.sh >>> sudo cp *fw /lib/firmware >>> >>> git clone git://linuxtv.org/media_build.git >>> cd media_build >>> ./build.sh >>> sudo make install >>> >>> The first time it breaks, this is expected. I edit v4l/.config and >>> change CONFIG_DVB_FIREDTV=m to CONFIG_DVB_FIREDTV=n >>> >>> I compile again, and it should work. But it breaks. Heres the message I get. >>> >>> make[2]: Leaving directory `/path/media_build/linux' >>> make -C /lib/modules/2.6.35-22-generic/build >>> SUBDIRS=/path/media_build/v4l modules >>> make[2]: Entering directory `/usr/src/linux-headers-2.6.35-22-generic' >>> CC [M] /path/media_build/v4l/fmdrv_common.o >>> /path/media_build/v4l/fmdrv_common.c:41: fatal error: >>> linux/ti_wilink_st.h: No such file or directory >>> compilation terminated. >>> make[3]: *** [/path/media_build/v4l/fmdrv_common.o] Error 1 >>> make[2]: *** [_module_/path/media_build/v4l] Error 2 >>> make[2]: Leaving directory `/usr/src/linux-headers-2.6.35-22-generic' >>> make[1]: *** [default] Error 2 >>> make[1]: Leaving directory `/path/media_build/v4l' >>> make: *** [all] Error 2 >>> >>> Why does it break? Thanks. >> >> Hans Verkuil pushed the fix for this to the media_build tree this >> morning. From looking at it, you'll need to get a fresh tarfile >> in linux/. >> >> http://git.linuxtv.org/media_build.git?a=commitdiff;h=bb1da6b26bc9d44182ec0cfd9ed2b0e04e3cbec0 >> >> -- >> Jarod Wilson >> jarod@xxxxxxxxxxxx >> >> >> >> -- Jarod Wilson jarod@xxxxxxxxxxxx -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
