Ð ÑÐÐÐÑÐÐÐÐ ÐÑ 27 ÑÐÐÑÐÐÑ 2011 22:57:50 ÐÐÑÐÑ Malcolm Priestley ÐÐÐÐÑÐÐ: > On Sun, 2011-02-27 at 20:30 +0200, Igor M. Liplianin wrote: > > Ð ÑÐÐÐÑÐÐÐÐ ÐÑ 27 ÑÐÐÑÐÐÑ 2011 16:40:19 ÐÐÑÐÑ TÃrÃk Edwin ÐÐÐÐÑÐÐ: > > > Hi, > > > > Hi > > > > > Please see http://llvm.org/bugs/show_bug.cgi?id=9259#c5, is the code > > > intended to do a quadratic increment there? > > > > > > While looking at this, I wonder if this isn't also a bug in the > > > original > > > > > > code: > > > /* read stv0299 register */ > > > request = 0xb5; > > > value = msg[0].buf[0];/* register */ > > > for (i = 0; i < msg[1].len; i++) { > > > > > > value = value + i; > > > ret = dw2102_op_rw(d->udev, 0xb5, > > > > > > value, buf6, 2, DW2102_READ_MSG); > > > > > > msg[1].buf[i] = buf6[0]; > > > > > > } > > > > > > I don't know anything about the hardware this driver is written for, > > > but is 'value' really intended to increment quadratically? That seems > > > suspicious. One > > > > > > wonders if the following is what was intended: > > > [...] > > > for (i = 0; i < msg[1].len; i++) { > > > > > > ret = dw2102_op_rw(d->udev, 0xb5, > > > > > > value + i, buf6, 2, DW2102_READ_MSG); > > > > > > msg[1].buf[i] = buf6[0]; > > > > > > } > > > > Accidentally, this didn't affect driver, as it reads registers by one > > register at one time. But it should be corrected. > > stv0299, along with other stv02xx family members can read and write the > entire register map from the start register. You misundestood me. I spoke about driver features, not about stv0299 features. Except that, you are right. > > However, there is a limitation, the buffer size of the I2C master > hardware. -- Igor M. Liplianin Microsoft Windows Free Zone - Linux used for all Computing Tasks -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html