Hi Folks, I bought a new Hauppauge WinTV USB 2 tuner card and was hoping to use it in linux. I specifically looked up to find whether this card is supported or not, and I found that it's indeed supported by em28xx drivers. So i was hoping that this card would be autodetected and register all the dev nodes. But it wasn't. Am using Kernel 2.6.32-5 on debian lenny. Following are the dmesg output when I insert the card: [ 550.320563] usb 5-7: new high speed USB device using ehci_hcd and address 8 [ 550.661901] usb 4-1: new full speed USB device using uhci_hcd and address 2 [ 550.810999] usb 4-1: not running at top speed; connect to a high speed hub [ 550.845015] usb 4-1: New USB device found, idVendor=2040, idProduct=6610 [ 550.845023] usb 4-1: New USB device strings: Mfr=16, Product=32, SerialNumber=64 [ 550.845046] usb 4-1: Product: WTV910 [ 550.845050] usb 4-1: SerialNumber: 12502365 [ 550.845471] usb 4-1: configuration #1 chosen from 1 choice Following is from lsusb output: Bus 001 Device 005: ID 045e:0734 Microsoft Corp. Wireless Optical Desktop 700 Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 007: ID 413c:8126 Dell Computer Corp. Wireless 355 Bluetooth Bus 005 Device 004: ID 0bc2:2120 Seagate RSS LLC Bus 005 Device 002: ID 413c:a005 Dell Computer Corp. Internal 2.0 Hub Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 002: ID 046d:c05a Logitech, Inc. Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 002: ID 2040:6610 Hauppauge Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 041e:3040 Creative Technology, Ltd SoundBlaster Live! 24-bit External SB0490 Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Following is from cat /proc/bus/usb/devices: T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2040 ProdID=6610 Rev= 0.6f S: Product=WTV910 S: SerialNumber=12502365 C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none) E: Ad=81(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I: If#= 0 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none) E: Ad=81(I) Atr=01(Isoc) MxPS= 512 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I: If#= 0 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none) E: Ad=81(I) Atr=01(Isoc) MxPS= 512 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms Following is the output when I manually modprobe the driver: [ 844.336942] Linux video capture interface: v2.00 [ 844.386271] usbcore: registered new interface driver em28xx [ 844.387234] em28xx driver loaded Could you pls tell me if this card is supported? If so, what should I do? One thing I noticed is the card is identified with the product as "WTV 910" instead of the expected "WinTV USB2" Pls let me know if you need any other info and I can get it for you. Thanks, Vivek. -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
