Hello Pranjal, On Sun, Feb 20, 2011 at 10:13 AM, Pranjal Pandey <pranjal8128@xxxxxxxxx> wrote: > I am trying to use UTV 330 tv tuner card to watch tv on my laptop. I > am using Ubuntu 10.10 with 2.6.35 kernel. To play the tv i use > > tvtime -d /dev/video1 > > Tvtime plays the video properly but there is no audio. > > The output of dmesg is :::: <snip> > I have a lineout in the device. I have tried connecting earphone to > the lineout but there is no audio (seems like there is no signal). I > also used following with no improvements: > arecord -D hw:0,0 -c 2 -f S16_LE | aplay > > From the dmesg output i can see a few things wrongly detected. First > it says that there is no audio on board but the device has a lineout > and hence some codec (on board audio). The em2860 based devices do not have the ability to provide audio over the USB. Your only option is to connect the device's line out to your sound card. If you're getting audio with Windows without hooking up that line out cable, then there is something very strange going on. > The second thing is that the board i detected as "Gadmei UTV330+" and not as "Gadmei UTV330". The board name should not relevant in this case. It's the same core hardware design and the vendor was too dumb to make it easy to identify the correct model for the board (for example, by giving them unique USB IDs). > The output of lsusb is: > Bus 002 Device 004: ID eb1a:2860 eMPIA Technology, Inc. > > I checked the driver files. In em28xx-cards.c "Gadmei UTV330+" > corresponds to "EM2861_BOARD_GADMEI_UTV330PLUS" but from lsusb i know > that the device is em2860 and not em2861. Again, this doesn't matter. There were no driver changes required to support the newer revision of the chip. > I have also checked the device in windows and it works fine. Does > anyone has any clue whats wrong here. Any suggestions ? Has anyone > successfully used this card in linux ? What exactly is your experience with Windows? Are you able to get audio without having to hook up the line-out to your sound card? You should also try the composite/s-video input instead of the tuner and see if you get audio. If you do, then we know the problem is specific to the onboard tuner chip and not something with the em2860 bridge. Devin -- Devin J. Heitmueller - Kernel Labs http://www.kernellabs.com -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
