Hi! When I try to use my new USB TV tuner on Fedora 14 (log messages: in the end) with this: mplayer -tv driver=v4l2:input=0:width=768:height=576:device=/dev/video2:norm=5:chanlist=europe-west:freq=224.25 tv:// I hear nothing, but I c good pictures... When I use this command simultaneously: arecord -D front:CARD=PAL,DEV=0 -f S16_LE -c 2 -r 8000 /aux/tmp/bla.wav I get correct audio with strong noise: http://www.wgboome.de./bla.wav (it is from input=1 for copyright reasons... so there is silence plus noise) according to "amixer -c1" (card 0 is the audio device on the mainboard and is handled by pulseaudio) the PCTV audio device has mono audio: Simple mixer control 'Line',0 Capabilities: cvolume cvolume-joined cswitch cswitch-joined penum Capture channels: Mono Limits: Capture 0 - 16 Mono: Capture 8 [50%] [0.00dB] [on] but arecord wants "-c2"... when i add hw:1 as 2nd source to pulseaudio, i get the same result... Why is that? Thx. Bye Arne attachment: usb 1-1: new high speed USB device using ehci_hcd and address 12 usb 1-1: New USB device found, idVendor=2304, idProduct=0208 usb 1-1: New USB device strings: Mfr=2, Product=1, SerialNumber=0 usb 1-1: Product: PCTV USB2 PAL usb 1-1: Manufacturer: Pinnacle Systems GmbH em28xx: New device Pinnacle Systems GmbH PCTV USB2 PAL @ 480 Mbps (2304:0208, interface 0, class 0) em28xx #0: chip ID is em2820 (or em2710) em28xx #0: i2c eeprom 00: 1a eb 67 95 04 23 08 02 10 00 1e 03 98 1e 6a 2e em28xx #0: i2c eeprom 10: 00 00 06 57 6e 00 00 00 8e 00 00 00 07 00 00 00 em28xx #0: i2c eeprom 20: 16 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 01 00 00 00 00 00 00 em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 2e 03 50 00 69 00 em28xx #0: i2c eeprom 70: 6e 00 6e 00 61 00 63 00 6c 00 65 00 20 00 53 00 em28xx #0: i2c eeprom 80: 79 00 73 00 74 00 65 00 6d 00 73 00 20 00 47 00 em28xx #0: i2c eeprom 90: 6d 00 62 00 48 00 00 00 1e 03 50 00 43 00 54 00 em28xx #0: i2c eeprom a0: 56 00 20 00 55 00 53 00 42 00 32 00 20 00 50 00 em28xx #0: i2c eeprom b0: 41 00 4c 00 00 00 06 03 31 00 00 00 00 00 00 00 em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 0e 5d 62 35 03 ca 7b f3 em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x7623b74b em28xx #0: EEPROM info: em28xx #0: AC97 audio (5 sample rates) em28xx #0: 500mA max power em28xx #0: Table at 0x06, strings=0x1e98, 0x2e6a, 0x0000 em28xx #0: Identified as Pinnacle PCTV USB 2 (card=3) saa7115 7-0025: saa7113 found (1f7113d0e100000) @ 0x4a (em28xx #0) tda8290_probe: tda8290 couldn't read register 0x1f tda8295_probe: tda8290 couldn't read register 0x2f tuner 7-0043: chip found @ 0x86 (em28xx #0) tda9887 7-0043: creating new instance tda9887 7-0043: tda988[5/6/7] found tuner 7-0063: chip found @ 0xc6 (em28xx #0) tuner-simple 7-0063: creating new instance tuner-simple 7-0063: type set to 37 (LG PAL (newer TAPC series)) em28xx #0: Config register raw data: 0x10 em28xx #0: AC97 vendor ID = 0xffffffff em28xx #0: AC97 features = 0x6a90 em28xx #0: Empia 202 AC97 audio processor detected em28xx #0: v4l2 driver version 0.1.2 em28xx #0: V4L2 video device registered as video2 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
