On Sat, Feb 12, 2011 at 11:46:13AM -0500, Andy Walls wrote: > On Sat, 2011-02-12 at 09:36 -0700, Mark Zimmerman wrote: > > On Sat, Feb 12, 2011 at 11:27:27AM -0500, Andy Walls wrote: > > > On Sat, 2011-02-12 at 08:29 -0700, Mark Zimmerman wrote: > > > > On Tue, Dec 07, 2010 at 12:07:53PM -0700, Mark Zimmerman wrote: > > > > > Greetings: > > > > > > > > > > I have a DViCO FusionHDTV7 Dual Express card that works with 2.6.35 but > > > > > which fails to initialize with the latest 2.6.36 kernel. The firmware > > > > > fails to load due to an i2c failure. A search of the archives indicates > > > > > that this is not the first time this issue has occurred. > > > > > > > > > > What can I do to help get this problem fixed? > > > > > > > > > > Here is the dmesg from 2.6.35, for the two tuners: > > > > > > > > > > xc5000: waiting for firmware upload (dvb-fe-xc5000-1.6.114.fw)... > > > > > xc5000: firmware read 12401 bytes. > > > > > xc5000: firmware uploading... > > > > > xc5000: firmware upload complete... > > > > > xc5000: waiting for firmware upload (dvb-fe-xc5000-1.6.114.fw)... > > > > > xc5000: firmware read 12401 bytes. > > > > > xc5000: firmware uploading... > > > > > xc5000: firmware upload complete.. > > > > > > > > > > and here is what happens with 2.6.36: > > > > > > > > > > xc5000: waiting for firmware upload (dvb-fe-xc5000-1.6.114.fw)... > > > > > xc5000: firmware read 12401 bytes. > > > > > xc5000: firmware uploading... > > > > > xc5000: I2C write failed (len=3) > > > > > xc5000: firmware upload complete... > > > > > xc5000: Unable to initialise tuner > > > > > xc5000: waiting for firmware upload (dvb-fe-xc5000-1.6.114.fw)... > > > > > xc5000: firmware read 12401 bytes. > > > > > xc5000: firmware uploading... > > > > > xc5000: I2C write failed (len=3) > > > > > xc5000: firmware upload complete... > > > > > > > > > > > > > I did a git bisect on this and finally reached the end of the line. > > > > Here is what it said: > > > > > > > > qpc$ git bisect bad > > > > 82ce67bf262b3f47ecb5a0ca31cace8ac72b7c98 is the first bad commit > > > > commit 82ce67bf262b3f47ecb5a0ca31cace8ac72b7c98 > > > > Author: Jarod Wilson <jarod@xxxxxxxxxx> > > > > Date: Thu Jul 29 18:20:44 2010 -0300 > > > > > > > > V4L/DVB: staging/lirc: fix non-CONFIG_MODULES build horkage > > > > > > > > Fix when CONFIG_MODULES is not enabled: > > > > > > > > drivers/staging/lirc/lirc_parallel.c:243: error: implicit declaration of function 'module_refcount' > > > > drivers/staging/lirc/lirc_it87.c:150: error: implicit declaration of function 'module_refcount' > > > > drivers/built-in.o: In function `it87_probe': > > > > lirc_it87.c:(.text+0x4079b0): undefined reference to `init_chrdev' > > > > lirc_it87.c:(.text+0x4079cc): undefined reference to `drop_chrdev' > > > > drivers/built-in.o: In function `lirc_it87_exit': > > > > lirc_it87.c:(.exit.text+0x38a5): undefined reference to `drop_chrdev' > > > > > > > > Its a quick hack and untested beyond building, since I don't have the > > > > hardware, but it should do the trick. > > > > > > > > Acked-by: Randy Dunlap <randy.dunlap@xxxxxxxxxx> > > > > Signed-off-by: Jarod Wilson <jarod@xxxxxxxxxx> > > > > Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx> > > > > > > > > :040000 040000 f645b46a07b7ff87a2c11ac9296a5ff56e89a0d0 49e50945ccf8e1c8567c049908890d2752443b72 M drivers > > > > > > Hmm. git log --patch 82ce67bf262b3f47ecb5a0ca31cace8ac72b7c98 shows the > > > commit is completely unrealted. > > > > > > Please try and see if things are good or bad at commit > > > 18a87becf85d50e7f3d547f1b7a75108b151374d: > > > > > > commit 18a87becf85d50e7f3d547f1b7a75108b151374d > > > Author: Jean Delvare <khali@xxxxxxxxxxxx> > > > Date: Sun Jul 18 17:05:17 2010 -0300 > > > > > > V4L/DVB: cx23885: i2c_wait_done returns 0 or 1, don't check for < 0 return v > > > > > > Function i2c_wait_done() never returns negative values, so there is no > > > point in checking for them. > > > > > > Signed-off-by: Jean Delvare <khali@xxxxxxxxxxxx> > > > Signed-off-by: Andy Walls <awalls@xxxxxxxxxxxxxxxx> > > > Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx> > > > > > > Which is the first commit, prior to the one you found, that seems to me > > > to have any direct bearing to I2C transactions. > > > > > > If that commit is good, then these commits in between would be my next > > > likely suspects: > > > e5514f104d875b3d28cbcd5d4f2b96ab2fca1e29 > > > dbe83a3b921328e12b2abe894fc692afba293d7f > > > > > > Regards, > > > Andy > > > > > > > Sorry to require so much hand holding, but I am new to all of this git > > gymnastics. Would you mind sending me the correct git command to get > > to a specific commit? > > It should just be > > $ git checkout 18a87becf85d50e7f3d547f1b7a75108b151374d > > or whatever the commit number git log shows you for the change I suspect > is the problem. > > > > Also, do I need to do a bisect reset? > > I wouldn't reset the git bisect yet. If you test a commit and it is > good, you will want to mark it with 'git bisect good <commit-hash>', and > if it is bad, you will want to mark it with 'git bisect bad > <commit-hash>' > > BTW, can you provide the output of 'git bisect log' ? > I suspect I know why the bisect process went astray. Early on, I was unable to get a successful build because of mismatch errors. Turning off CONFIG_STAGING fixed this. If most of the changes were related to staging then the bisect could have skipped the relevant change. Note the unlikely string of 5 bad ones in a row at the end. Here is the log: git bisect start # good: [9fe6206f400646a2322096b56c59891d530e8d51] Linux 2.6.35 git bisect good 9fe6206f400646a2322096b56c59891d530e8d51 # bad: [f6f94e2ab1b33f0082ac22d71f66385a60d8157f] Linux 2.6.36 git bisect bad f6f94e2ab1b33f0082ac22d71f66385a60d8157f # good: [78417334b5cb6e1f915b8fdcc4fce3f1a1b4420c] Merge branch 'bkl/core' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing git bisect good 78417334b5cb6e1f915b8fdcc4fce3f1a1b4420c # bad: [14a4fa20a10d76eb98b7feb25be60735217929ba] Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 git bisect bad 14a4fa20a10d76eb98b7feb25be60735217929ba # good: [8196867c74890ccdf40a2b5e3e173597fbc4f9ac] Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bcopeland/omfs git bisect good 8196867c74890ccdf40a2b5e3e173597fbc4f9ac # bad: [3d30701b58970425e1d45994d6cb82f828924fdd] Merge branch 'for-linus' of git://neil.brown.name/md git bisect bad 3d30701b58970425e1d45994d6cb82f828924fdd # good: [9895850b23886e030cd1e7241d5529a57e969c3d] Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 git bisect good 9895850b23886e030cd1e7241d5529a57e969c3d # good: [de75d60d5ea235e6e09f4962ab22541ce0fe176a] block: make sure that REQ_* types are seen even with CONFIG_BLOCK=n git bisect good de75d60d5ea235e6e09f4962ab22541ce0fe176a # bad: [6dd5aff3cab284556952d96f1112b17299e126d8] V4L/DVB: v4l2-ctrls: Whitespace cleanups git bisect bad 6dd5aff3cab284556952d96f1112b17299e126d8 # good: [efce8ca3c5d8a35018f801d687396e1911cfc868] V4L/DVB: staging/lirc: fix Kconfig dependencies git bisect good efce8ca3c5d8a35018f801d687396e1911cfc868 # bad: [9bde9f263e958b0d588aada03854fcc0f0c88b86] V4L/DVB: uvcvideo: Drop corrupted compressed frames git bisect bad 9bde9f263e958b0d588aada03854fcc0f0c88b86 # bad: [39b2c0687b238d8bce19d5e8c0c8dc4e7fe50ed4] V4L/DVB: IR: JVC: make repeat work git bisect bad 39b2c0687b238d8bce19d5e8c0c8dc4e7fe50ed4 # bad: [2c1101d5aeddda7bd0dd03bddea7aed6dbf80074] V4L/DVB: IR: put newly ported streamzap driver in proper home git bisect bad 2c1101d5aeddda7bd0dd03bddea7aed6dbf80074 # bad: [7c294402d58e22bb760c0e1a825eea5d582a8f2d] V4L/DVB: IR/mceusb: less generic callback name and remove cruft git bisect bad 7c294402d58e22bb760c0e1a825eea5d582a8f2d # bad: [82ce67bf262b3f47ecb5a0ca31cace8ac72b7c98] V4L/DVB: staging/lirc: fix non-CONFIG_MODULES build horkage git bisect bad 82ce67bf262b3f47ecb5a0ca31cace8ac72b7c98 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
