On 02/08/11 12:09, ext Bensaid, Selma wrote: > 2 Digital interfaces are possible for FM WL1273: > - the external connection: the I2S lines are used for the FM PCM samples > - the internal connection: the BT PCM interface is used for the FM PCM samples Yes, that is correct, I just did not wanted to go into details. Currently the ASoC codec driver only supports the BT/FM PCM interface. Adding the dedicated I2S interface for the FM radio should not be a big effort, we just need to add another dai to the codec driver, and connect that to the host processor. As I said before, we only implemented the BT/FM PCM interface support, since we do not have HW, where we could verify the dedicated FM I2S lines. But adding the support should not be a big deal IMHO (and can be done even without any means of testing it). > For both configuration we have a set of HCI commands to configure the FM audio > path and one of my concerns is to know if the wl1273_codec should handle the audio path configuration > and the switch between FM and BT SCO? It would be better if the codec could handle the configuration, depending on which DAI is in use. If we can send HCI commands from kernel, I think that would be the cleanest way. -- Péter -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
