On 07/02/2011, at 13:34, Dave Johansen wrote: >> However the drivers in Ubuntu at least work for 1 tuner, if I try and use both in mythtv one tends to lock up after a while :-/ > > I actually had the card working and tuning channels about 2 years ago > with Ubuntu 08.10 and 09.04. From what I recall 08.10 required updated Yes that's my recollection. > drivers but 09.04 didn't, so I'd imagine that it should at least be > possible for it to work and possibly just out of the box. But do you > think that has a high likelihood of success now? I would expect at least a single channel and the remote to work since your card seems very similar to mine.. However I don't see any timeouts using mine, at least for 1 channel. Have you looked in dmesg for related parameters? > > On Sun, Feb 6, 2011 at 4:28 PM, Mark Zimmerman <markzimm@xxxxxxxx> wrote: >> On Sun, Feb 06, 2011 at 03:46:59PM -0700, Dave Johansen wrote: >>> I am trying to resurrect my MythBuntu system with a DViCO FusionHDTV7 >>> Dual Express. I had previously had some issues with trying to get >>> channels working in MythTV ( >>> http://www.mail-archive.com/linux-media@xxxxxxxxxxxxxxx/msg03846.html >>> ), but now it locks up with MythBuntu 10.10 when I scan for channels >>> in MythTV and also with the scan command line utility. >>> >>> Here's the output from scan: >>> >>> scan /usr/share/dvb/atsc/us-ATSC- >>> center-frequencies-8VSB >>> scanning us-ATSC-center-frequencies-8VSB >>> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' >>>>>> tune to: 189028615:8VSB >>> WARNING: filter timeout pid 0x0000 >>> WARNING: filter timeout pid 0x1ffb >>> >>> Any ideas/suggestions on how I can get this to work? >> >> Check your dmesg to see if yout firmware loads. >> >> >> > > I checked dmesg and the firmware loads. It doesn't appear to report > any errors either. > > Thanks, > Dave > -- > To unsubscribe from this list: send the line "unsubscribe linux-media" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- Daniel O'Connor software and network engineer for Genesis Software - http://www.gsoft.com.au "The nice thing about standards is that there are so many of them to choose from." -- Andrew Tanenbaum GPG Fingerprint - 5596 B766 97C0 0E94 4347 295E E593 DC20 7B3F CE8C -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
