This patch adds support for Terratec Grabster AV 150/250 MX. For now it is
only possible to use composite input as switching inputs does not work.
Signed-off-by: Holger Nelson <hnelson@xxxxxxxxxx>
---
drivers/staging/tm6000/tm6000-cards.c | 17 +++++++++++++++++
1 files changed, 17 insertions(+), 0 deletions(-)
diff --git a/drivers/staging/tm6000/tm6000-cards.c b/drivers/staging/tm6000/tm6000-cards.c
index 455038b..078bba4 100644
--- a/drivers/staging/tm6000/tm6000-cards.c
+++ b/drivers/staging/tm6000/tm6000-cards.c
@@ -50,6 +50,7 @@
#define TM6010_BOARD_BEHOLD_VOYAGER 11
#define TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE 12
#define TM6010_BOARD_TWINHAN_TU501 13
+#define TM5600_BOARD_TERRATEC_GRABSTER 14
#define TM6000_MAXBOARDS 16
static unsigned int card[] = {[0 ... (TM6000_MAXBOARDS - 1)] = UNSET };
@@ -303,6 +304,19 @@ struct tm6000_board tm6000_boards[] = {
.dvb_led = TM6010_GPIO_5,
.ir = TM6010_GPIO_0,
},
+ },
+ [TM5600_BOARD_TERRATEC_GRABSTER] = {
+ .name = "Terratec Grabster AV 150/250 MX",
+ .type = TM5600,
+ .caps = {
+ .has_tuner = 0,
+ .has_dvb = 0,
+ .has_zl10353 = 0,
+ .has_eeprom = 0,
+ .has_remote = 0,
+ },
+ .gpio = {
+ },
}
};
@@ -325,6 +339,7 @@ struct usb_device_id tm6000_id_table[] = {
{ USB_DEVICE(0x13d3, 0x3241), .driver_info = TM6010_BOARD_TWINHAN_TU501 },
{ USB_DEVICE(0x13d3, 0x3243), .driver_info = TM6010_BOARD_TWINHAN_TU501 },
{ USB_DEVICE(0x13d3, 0x3264), .driver_info = TM6010_BOARD_TWINHAN_TU501 },
+ { USB_DEVICE(0x0ccd, 0x0079), .driver_info = TM5600_BOARD_TERRATEC_GRABSTER },
{ },
};
@@ -488,6 +503,8 @@ int tm6000_cards_setup(struct tm6000_core *dev)
* the board-specific session.
*/
switch (dev->model) {
+ case TM5600_BOARD_TERRATEC_GRABSTER:
+ return 0;
case TM6010_BOARD_HAUPPAUGE_900H:
case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
case TM6010_BOARD_TWINHAN_TU501:
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
