On Tue, 1 Feb 2011, Janusz Uzycki wrote:
> camera 0-0: Probing 0-0
> sh_mobile_ceu sh_mobile_ceu.0: SuperH Mobile CEU driver attached to camera 0
> tvp5150 0-005d: chip found @ 0xba (i2c-sh_mobile)
> tvp5150 0-005d: tvp5150am1 detected.
> sh_mobile_ceu sh_mobile_ceu.0: SuperH Mobile CEU driver detached from camera 0
>
> There is no error 515 but the driver is still detached.
Good, this is correct. It will be re-attached when you open it.
Thanks
Guennadi
> drivers/media/video/sh_mobile_ceu_camera.c:
> sh_mobile_ceu_remove_device() is called /* Called with .video_lock held */
> static struct soc_camera_host_ops sh_mobile_ceu_host_ops = {
> .owner = THIS_MODULE,
> .add = sh_mobile_ceu_add_device,
> .remove = sh_mobile_ceu_remove_device,
> It seems sh_mobile_ceu_add_device() was failed.
> I will try to explore that.
>
> Janusz
>
> ----- Original Message ----- From: "Guennadi Liakhovetski"
> <g.liakhovetski@xxxxxx>
> To: "Janusz Uzycki" <janusz.uzycki@xxxxxxxxxxxxxx>
> Cc: <g.daniluk@xxxxxxxxxxxxxx>; "Linux Media Mailing List"
> <linux-media@xxxxxxxxxxxxxxx>
> Sent: Tuesday, February 01, 2011 2:21 PM
> Subject: Re: SoC Camera driver and TV decoder
>
>
> > On Tue, 1 Feb 2011, Janusz Uzycki wrote:
> >
> > > include/linux/errno.h:#define ENOIOCTLCMD 515 /* No ioctl
> > > command */
> > >
> > > What did I forget below?
> > > static const struct v4l2_subdev_video_ops tvp5150_video_ops = {
> > > .s_routing = tvp5150_s_routing,
> > >
> > > /* SoC camera: */
> > > .s_stream = tvp5150_s_stream,
> > > .g_mbus_fmt = tvp5150_g_fmt,
> > > .s_mbus_fmt = tvp5150_s_fmt,
> > > .try_mbus_fmt = tvp5150_try_fmt,
> > > .enum_mbus_fmt = tvp5150_enum_fmt,
> > > /* .cropcap = tw9910_cropcap,
> > > .g_crop = tw9910_g_crop,
> > > .s_crop = tw9910_s_crop,*/
> > > };
> > >
> > > cropcap/g_crop/s_cros are necessary? why and when?
> >
> > cropcap and g_crop might be necessary - at least minimal static versions.
> >
> > Thanks
> > Guennadi
> >
> > >
> > > thanks
> > > Janusz
> > >
> > >
> > > > On Thu, 27 Jan 2011, Janusz Uzycki wrote:
> > > >
> > > > > Hello Guennadi again.
> > > > >
> > > > > I patched tvp5150.c according to tw9910 driver (without real cropping
> > > > > support yet).
> > > > > Unfortunately I got the messages:
> > > > > camera 0-0: Probing 0-0
> > > > > sh_mobile_ceu sh_mobile_ceu.0: SuperH Mobile CEU driver attached to >
> > > > camera
> > > > > 0
> > > > > tvp5150 0-005d: chip found @ 0xba (i2c-sh_mobile)
> > > > > tvp5150 0-005d: tvp5150am1 detected.
> > > >
> > > > This looks good - i2c to the chip works!
> > > >
> > > > > sh_mobile_ceu sh_mobile_ceu.0: SuperH Mobile CEU driver detached from
> > > > > camera 0
> > > > > camera: probe of 0-0 failed with error -515
> > > >
> > > > This is strange, however - error code 515... Can you try to find out >
> > > where
> > > > it is coming from?
> > > >
> > > > Thanks
> > > > Guennadi
> > > >
> > >
> >
> > ---
> > Guennadi Liakhovetski, Ph.D.
> > Freelance Open-Source Software Developer
> > http://www.open-technology.de/
> >
>
---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
http://www.open-technology.de/
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
