Re: [RFC PATCH 05/12] ov9640: convert to the control framework.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wednesday 12 January 2011 00:06:05 Hans Verkuil wrote:
> Signed-off-by: Hans Verkuil <hverkuil@xxxxxxxxx>

Hey, I can do a test-run on this one eventually ;-)

Cheers
> ---
>  drivers/media/video/ov9640.c |  124
> ++++++++++++++---------------------------- drivers/media/video/ov9640.h | 
>   4 +-
>  2 files changed, 43 insertions(+), 85 deletions(-)
> 
> diff --git a/drivers/media/video/ov9640.c b/drivers/media/video/ov9640.c
> index 53d88a2..dbda50c 100644
> --- a/drivers/media/video/ov9640.c
> +++ b/drivers/media/video/ov9640.c
> @@ -27,6 +27,7 @@
>  #include <linux/videodev2.h>
>  #include <media/v4l2-chip-ident.h>
>  #include <media/v4l2-common.h>
> +#include <media/v4l2-ctrls.h>
>  #include <media/soc_camera.h>
> 
>  #include "ov9640.h"
> @@ -162,27 +163,6 @@ static enum v4l2_mbus_pixelcode ov9640_codes[] = {
>  	V4L2_MBUS_FMT_RGB565_2X8_LE,
>  };
> 
> -static const struct v4l2_queryctrl ov9640_controls[] = {
> -	{
> -		.id		= V4L2_CID_VFLIP,
> -		.type		= V4L2_CTRL_TYPE_BOOLEAN,
> -		.name		= "Flip Vertically",
> -		.minimum	= 0,
> -		.maximum	= 1,
> -		.step		= 1,
> -		.default_value	= 0,
> -	},
> -	{
> -		.id		= V4L2_CID_HFLIP,
> -		.type		= V4L2_CTRL_TYPE_BOOLEAN,
> -		.name		= "Flip Horizontally",
> -		.minimum	= 0,
> -		.maximum	= 1,
> -		.step		= 1,
> -		.default_value	= 0,
> -	},
> -};
> -
>  /* read a register */
>  static int ov9640_reg_read(struct i2c_client *client, u8 reg, u8 *val)
>  {
> @@ -307,52 +287,25 @@ static unsigned long ov9640_query_bus_param(struct
> soc_camera_device *icd) return soc_camera_apply_sensor_flags(icl, flags);
>  }
> 
> -/* Get status of additional camera capabilities */
> -static int ov9640_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control
> *ctrl) -{
> -	struct ov9640_priv *priv = to_ov9640_sensor(sd);
> -
> -	switch (ctrl->id) {
> -	case V4L2_CID_VFLIP:
> -		ctrl->value = priv->flag_vflip;
> -		break;
> -	case V4L2_CID_HFLIP:
> -		ctrl->value = priv->flag_hflip;
> -		break;
> -	}
> -	return 0;
> -}
> -
>  /* Set status of additional camera capabilities */
> -static int ov9640_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control
> *ctrl) +static int ov9640_s_ctrl(struct v4l2_ctrl *ctrl)
>  {
> -	struct i2c_client *client = v4l2_get_subdevdata(sd);
> -	struct ov9640_priv *priv = to_ov9640_sensor(sd);
> -
> -	int ret = 0;
> +	struct ov9640_priv *priv = container_of(ctrl->handler, struct
> ov9640_priv, hdl); +	struct i2c_client *client =
> v4l2_get_subdevdata(&priv->subdev);
> 
>  	switch (ctrl->id) {
>  	case V4L2_CID_VFLIP:
> -		priv->flag_vflip = ctrl->value;
> -		if (ctrl->value)
> -			ret = ov9640_reg_rmw(client, OV9640_MVFP,
> +		if (ctrl->val)
> +			return ov9640_reg_rmw(client, OV9640_MVFP,
>  							OV9640_MVFP_V, 0);
> -		else
> -			ret = ov9640_reg_rmw(client, OV9640_MVFP,
> -							0, OV9640_MVFP_V);
> -		break;
> +		return ov9640_reg_rmw(client, OV9640_MVFP, 0, OV9640_MVFP_V);
>  	case V4L2_CID_HFLIP:
> -		priv->flag_hflip = ctrl->value;
> -		if (ctrl->value)
> -			ret = ov9640_reg_rmw(client, OV9640_MVFP,
> +		if (ctrl->val)
> +			return ov9640_reg_rmw(client, OV9640_MVFP,
>  							OV9640_MVFP_H, 0);
> -		else
> -			ret = ov9640_reg_rmw(client, OV9640_MVFP,
> -							0, OV9640_MVFP_H);
> -		break;
> +		return ov9640_reg_rmw(client, OV9640_MVFP, 0, OV9640_MVFP_H);
>  	}
> -
> -	return ret;
> +	return -EINVAL;
>  }
> 
>  /* Get chip identification */
> @@ -664,8 +617,7 @@ static int ov9640_video_probe(struct soc_camera_device
> *icd, if (!icd->dev.parent ||
>  	    to_soc_camera_host(icd->dev.parent)->nr != icd->iface) {
>  		dev_err(&client->dev, "Parent missing or invalid!\n");
> -		ret = -ENODEV;
> -		goto err;
> +		return -ENODEV;
>  	}
> 
>  	/*
> @@ -673,20 +625,14 @@ static int ov9640_video_probe(struct
> soc_camera_device *icd, */
> 
>  	ret = ov9640_reg_read(client, OV9640_PID, &pid);
> +	if (!ret)
> +		ret = ov9640_reg_read(client, OV9640_VER, &ver);
> +	if (!ret)
> +		ret = ov9640_reg_read(client, OV9640_MIDH, &midh);
> +	if (!ret)
> +		ret = ov9640_reg_read(client, OV9640_MIDL, &midl);
>  	if (ret)
> -		goto err;
> -
> -	ret = ov9640_reg_read(client, OV9640_VER, &ver);
> -	if (ret)
> -		goto err;
> -
> -	ret = ov9640_reg_read(client, OV9640_MIDH, &midh);
> -	if (ret)
> -		goto err;
> -
> -	ret = ov9640_reg_read(client, OV9640_MIDL, &midl);
> -	if (ret)
> -		goto err;
> +		return ret;
> 
>  	switch (VERSION(pid, ver)) {
>  	case OV9640_V2:
> @@ -700,27 +646,25 @@ static int ov9640_video_probe(struct
> soc_camera_device *icd, break;
>  	default:
>  		dev_err(&client->dev, "Product ID error %x:%x\n", pid, ver);
> -		ret = -ENODEV;
> -		goto err;
> +		return -ENODEV;
>  	}
> 
>  	dev_info(&client->dev, "%s Product ID %0x:%0x Manufacturer ID %x:%x\n",
>  		 devname, pid, ver, midh, midl);
> 
> -err:
> -	return ret;
> +	return v4l2_ctrl_handler_setup(&priv->hdl);
>  }
> 
> +static const struct v4l2_ctrl_ops ov9640_ctrl_ops = {
> +	.s_ctrl = ov9640_s_ctrl,
> +};
> +
>  static struct soc_camera_ops ov9640_ops = {
>  	.set_bus_param		= ov9640_set_bus_param,
>  	.query_bus_param	= ov9640_query_bus_param,
> -	.controls		= ov9640_controls,
> -	.num_controls		= ARRAY_SIZE(ov9640_controls),
>  };
> 
>  static struct v4l2_subdev_core_ops ov9640_core_ops = {
> -	.g_ctrl			= ov9640_g_ctrl,
> -	.s_ctrl			= ov9640_s_ctrl,
>  	.g_chip_ident		= ov9640_g_chip_ident,
>  #ifdef CONFIG_VIDEO_ADV_DEBUG
>  	.g_register		= ov9640_get_register,
> @@ -775,12 +719,26 @@ static int ov9640_probe(struct i2c_client *client,
> 
>  	v4l2_i2c_subdev_init(&priv->subdev, client, &ov9640_subdev_ops);
> 
> -	icd->ops	= &ov9640_ops;
> +	v4l2_ctrl_handler_init(&priv->hdl, 2);
> +	v4l2_ctrl_new_std(&priv->hdl, &ov9640_ctrl_ops,
> +			V4L2_CID_VFLIP, 0, 1, 1, 0);
> +	v4l2_ctrl_new_std(&priv->hdl, &ov9640_ctrl_ops,
> +			V4L2_CID_HFLIP, 0, 1, 1, 0);
> +	priv->subdev.ctrl_handler = &priv->hdl;
> +	if (priv->hdl.error) {
> +		int err = priv->hdl.error;
> +
> +		kfree(priv);
> +		return err;
> +	}
> +
> +	icd->ops = &ov9640_ops;
> 
>  	ret = ov9640_video_probe(icd, client);
> 
>  	if (ret) {
>  		icd->ops = NULL;
> +		v4l2_ctrl_handler_free(&priv->hdl);
>  		kfree(priv);
>  	}
> 
> @@ -792,6 +750,8 @@ static int ov9640_remove(struct i2c_client *client)
>  	struct v4l2_subdev *sd = i2c_get_clientdata(client);
>  	struct ov9640_priv *priv = to_ov9640_sensor(sd);
> 
> +	v4l2_device_unregister_subdev(&priv->subdev);
> +	v4l2_ctrl_handler_free(&priv->hdl);
>  	kfree(priv);
>  	return 0;
>  }
> diff --git a/drivers/media/video/ov9640.h b/drivers/media/video/ov9640.h
> index f8a51b7..6b33a97 100644
> --- a/drivers/media/video/ov9640.h
> +++ b/drivers/media/video/ov9640.h
> @@ -198,12 +198,10 @@ struct ov9640_reg {
> 
>  struct ov9640_priv {
>  	struct v4l2_subdev		subdev;
> +	struct v4l2_ctrl_handler	hdl;
> 
>  	int				model;
>  	int				revision;
> -
> -	bool				flag_vflip;
> -	bool				flag_hflip;
>  };
> 
>  #endif	/* __DRIVERS_MEDIA_VIDEO_OV9640_H__ */
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux