On Monday 10 January 2011 15:05:34 Andreas Oberritter wrote: > On 01/10/2011 10:36 AM, Oliver Endriss wrote: > > From: Ralph Metzler <rjkm@xxxxxxxxxxxxxx> > > > > Driver for the Common Interface Controller CXD2099AR. > > Supports the CI of the cineS2 DVB-S2. > > > > For now, data is passed through '/dev/dvb/adapterX/sec0': > > - Encrypted data must be written to 'sec0'. > > - Decrypted data can be read from 'sec0'. > > - Setup the CAM using device 'ca0'. > > Nack. In DVB API terms, "sec" stands for satellite equipment control, > and if I remember correctly, sec0 already existed in the first versions > of the API and that's why its leftovers can be abused by this driver. > > The interfaces for writing data are dvr0 and demux0. If they don't fit > for decryption of recorded data, then they should be extended. > > For decryption of live data, no new user interface needs to be created. There was an attempt to find a solution for the problem in thread http://www.mail-archive.com/linux-media@xxxxxxxxxxxxxxx/msg22196.html As that discussion did not come to a final solution, and the driver is still experimental, I left the original patch 'as is'. CU Oliver -- ---------------------------------------------------------------- VDR Remote Plugin 0.4.0: http://www.escape-edv.de/endriss/vdr/ 4 MByte Mod: http://www.escape-edv.de/endriss/dvb-mem-mod/ Full-TS Mod: http://www.escape-edv.de/endriss/dvb-full-ts-mod/ ---------------------------------------------------------------- -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html