I installed media_build on a ubuntu 10.04 (kernel 2.6.32-26-generic) to see if I can get both channels working again, however now I find that mythtv drops out fairly regularly with "Video frame buffering failed too many times". Also, the IR no longer works, the following is in dmesg: [ 20.032080] IR RC5(x) protocol handler initialized [ 20.034348] IR RC6 protocol handler initialized [ 20.036681] IR JVC protocol handler initialized [ 20.038843] IR Sony protocol handler initialized [ 20.041000] ir_lirc_codec: Unknown symbol lirc_dev_fop_poll [ 20.041110] ir_lirc_codec: Unknown symbol lirc_dev_fop_open [ 20.041195] ir_lirc_codec: disagrees about version of symbol lirc_get_pdata [ 20.041198] ir_lirc_codec: Unknown symbol lirc_get_pdata [ 20.041279] ir_lirc_codec: Unknown symbol lirc_dev_fop_close [ 20.041399] ir_lirc_codec: Unknown symbol lirc_dev_fop_read [ 20.041472] ir_lirc_codec: disagrees about version of symbol lirc_register_driver [ 20.041474] ir_lirc_codec: Unknown symbol lirc_register_driver [ 20.041650] ir_lirc_codec: Unknown symbol lirc_dev_fop_ioctl And there is no /dev/input node. I did some testing with mplayer and tzap and it seems to work OK though. The hardware in question is: [ 19.717981] cx23885 driver version 0.0.2 loaded [ 19.718025] cx23885 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 19.718068] CORE cx23885[0]: subsystem: 18ac:db78, board: DViCO FusionHDTV DVB-T Dual Express [card=11,autodetected] [ 19.724751] IR NEC protocol handler initialized [ 19.785216] alloc irq_desc for 22 on node -1 [ 19.785219] alloc kstat_irqs on node -1 [ 19.785226] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 19.785257] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 19.869906] usbcore: registered new interface driver imon [ 19.888867] cx23885_dvb_register() allocating 1 frontend(s) [ 19.888872] cx23885[0]: cx23885 based dvb card [ 19.908805] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5 [ 19.923266] xc2028 0-0061: creating new instance [ 19.923272] xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner [ 19.923280] DVB: registering new adapter (cx23885[0]) [ 19.923285] DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)... [ 19.923910] cx23885_dvb_register() allocating 1 frontend(s) [ 19.923915] cx23885[0]: cx23885 based dvb card [ 19.924610] xc2028 1-0061: creating new instance [ 19.924613] xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner [ 19.924617] DVB: registering new adapter (cx23885[0]) [ 19.924622] DVB: registering adapter 1 frontend 0 (Zarlink ZL10353 DVB-T)... [ 19.925007] cx23885_dev_checkrevision() Hardware revision = 0xb0 [ 19.925019] cx23885[0]/0: found at 0000:02:00.0, rev: 2, irq: 16, latency: 0, mmio: 0xf5000000 [ 19.925026] cx23885 0000:02:00.0: setting latency timer to 64 [ 19.925100] alloc irq_desc for 30 on node -1 [ 19.925103] alloc kstat_irqs on node -1 [ 19.925121] cx23885 0000:02:00.0: irq 30 for MSI/MSI-X Any suggestions? I am going back to the vanilla kernel for now but I'm happy to test things :) Thanks. -- Daniel O'Connor software and network engineer for Genesis Software - http://www.gsoft.com.au "The nice thing about standards is that there are so many of them to choose from." -- Andrew Tanenbaum GPG Fingerprint - 5596 B766 97C0 0E94 4347 295E E593 DC20 7B3F CE8C -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
