Am 06.01.2011 23:31, schrieb Julian Scheel:
Attached is the diff I currently use.
Some more process. Attached is a new patch, which allows me to capture
video and audio from a PAL tuner. Imho the video has wrong colours
though (using PAL-B). Maybe someone would want to test that patch and
give some feedback?
Ok some hours of debugging later, I figured out that only encoder 1 was
not working properly. This was due to a wrong addressing when sending
the dif setup commands. The attached new patch fixes this.
Nur in linux-2.6.37/drivers/media/video/saa7164/: modules.order.
diff -x '*.o' -x '*.ko' -x '*.cmd' -x '*.mod.*' -ru linux-2.6.37.a/drivers/media/video/saa7164//saa7164-api.c linux-2.6.37/drivers/media/video/saa7164//saa7164-api.c
--- linux-2.6.37.a/drivers/media/video/saa7164//saa7164-api.c 2011-01-05 01:50:19.000000000 +0100
+++ linux-2.6.37/drivers/media/video/saa7164//saa7164-api.c 2011-01-08 16:10:32.000000000 +0100
@@ -548,7 +548,7 @@
tvaudio.std = TU_STANDARD_NTSC_M;
tvaudio.country = 1;
} else {
- tvaudio.std = TU_STANDARD_PAL_I;
+ tvaudio.std = 0x04; //TU_STANDARD_PAL_I;
tvaudio.country = 44;
}
@@ -608,7 +608,7 @@
dprintk(DBGLVL_API, "%s(nr=%d type=%d val=%x)\n", __func__,
port->nr, port->type, val);
- if (port->nr == 0)
+ if (port->nr < 3) //== 0)
mas = 0xd0;
else
mas = 0xe0;
diff -x '*.o' -x '*.ko' -x '*.cmd' -x '*.mod.*' -ru linux-2.6.37.a/drivers/media/video/saa7164//saa7164-cards.c linux-2.6.37/drivers/media/video/saa7164//saa7164-cards.c
--- linux-2.6.37.a/drivers/media/video/saa7164//saa7164-cards.c 2011-01-05 01:50:19.000000000 +0100
+++ linux-2.6.37/drivers/media/video/saa7164//saa7164-cards.c 2011-01-06 16:16:56.000000000 +0100
@@ -203,6 +203,66 @@
.i2c_reg_len = REGLEN_8bit,
} },
},
+ [SAA7164_BOARD_HAUPPAUGE_HVR2200_4] = {
+ .name = "Hauppauge WinTV-HVR2200",
+ .porta = SAA7164_MPEG_DVB,
+ .portb = SAA7164_MPEG_DVB,
+ .portc = SAA7164_MPEG_ENCODER,
+ .portd = SAA7164_MPEG_ENCODER,
+ .porte = SAA7164_MPEG_VBI,
+ .portf = SAA7164_MPEG_VBI,
+ .chiprev = SAA7164_CHIP_REV3,
+ .unit = {{
+ .id = 0x1d,
+ .type = SAA7164_UNIT_EEPROM,
+ .name = "4K EEPROM",
+ .i2c_bus_nr = SAA7164_I2C_BUS_0,
+ .i2c_bus_addr = 0xa0 >> 1,
+ .i2c_reg_len = REGLEN_8bit,
+ }, {
+ .id = 0x04,
+ .type = SAA7164_UNIT_TUNER,
+ .name = "TDA18271-1",
+ .i2c_bus_nr = SAA7164_I2C_BUS_1,
+ .i2c_bus_addr = 0xc0 >> 1,
+ .i2c_reg_len = REGLEN_8bit,
+ }, {
+ .id = 0x05,
+ .type = SAA7164_UNIT_ANALOG_DEMODULATOR,
+ .name = "TDA8290-1",
+ .i2c_bus_nr = SAA7164_I2C_BUS_1,
+ .i2c_bus_addr = 0x84 >> 1,
+ .i2c_reg_len = REGLEN_8bit,
+ }, {
+ .id = 0x1b,
+ .type = SAA7164_UNIT_TUNER,
+ .name = "TDA18271-2",
+ .i2c_bus_nr = SAA7164_I2C_BUS_2,
+ .i2c_bus_addr = 0xc0 >> 1,
+ .i2c_reg_len = REGLEN_8bit,
+ }, {
+ .id = 0x1c,
+ .type = SAA7164_UNIT_ANALOG_DEMODULATOR,
+ .name = "TDA8290-2",
+ .i2c_bus_nr = SAA7164_I2C_BUS_2,
+ .i2c_bus_addr = 0x84 >> 1,
+ .i2c_reg_len = REGLEN_8bit,
+ }, {
+ .id = 0x1e,
+ .type = SAA7164_UNIT_DIGITAL_DEMODULATOR,
+ .name = "TDA10048-1",
+ .i2c_bus_nr = SAA7164_I2C_BUS_1,
+ .i2c_bus_addr = 0x10 >> 1,
+ .i2c_reg_len = REGLEN_8bit,
+ }, {
+ .id = 0x1f,
+ .type = SAA7164_UNIT_DIGITAL_DEMODULATOR,
+ .name = "TDA10048-2",
+ .i2c_bus_nr = SAA7164_I2C_BUS_2,
+ .i2c_bus_addr = 0x12 >> 1,
+ .i2c_reg_len = REGLEN_8bit,
+ } },
+ },
[SAA7164_BOARD_HAUPPAUGE_HVR2250] = {
.name = "Hauppauge WinTV-HVR2250",
.porta = SAA7164_MPEG_DVB,
@@ -426,6 +486,10 @@
.subvendor = 0x0070,
.subdevice = 0x8851,
.card = SAA7164_BOARD_HAUPPAUGE_HVR2250_2,
+ }, {
+ .subvendor = 0x0070,
+ .subdevice = 0x8940,
+ .card = SAA7164_BOARD_HAUPPAUGE_HVR2200_4,
},
};
const unsigned int saa7164_idcount = ARRAY_SIZE(saa7164_subids);
@@ -469,6 +533,7 @@
case SAA7164_BOARD_HAUPPAUGE_HVR2200:
case SAA7164_BOARD_HAUPPAUGE_HVR2200_2:
case SAA7164_BOARD_HAUPPAUGE_HVR2200_3:
+ case SAA7164_BOARD_HAUPPAUGE_HVR2200_4:
case SAA7164_BOARD_HAUPPAUGE_HVR2250:
case SAA7164_BOARD_HAUPPAUGE_HVR2250_2:
case SAA7164_BOARD_HAUPPAUGE_HVR2250_3:
@@ -549,6 +614,7 @@
case SAA7164_BOARD_HAUPPAUGE_HVR2200:
case SAA7164_BOARD_HAUPPAUGE_HVR2200_2:
case SAA7164_BOARD_HAUPPAUGE_HVR2200_3:
+ case SAA7164_BOARD_HAUPPAUGE_HVR2200_4:
case SAA7164_BOARD_HAUPPAUGE_HVR2250:
case SAA7164_BOARD_HAUPPAUGE_HVR2250_2:
case SAA7164_BOARD_HAUPPAUGE_HVR2250_3:
diff -x '*.o' -x '*.ko' -x '*.cmd' -x '*.mod.*' -ru linux-2.6.37.a/drivers/media/video/saa7164//saa7164-dvb.c linux-2.6.37/drivers/media/video/saa7164//saa7164-dvb.c
--- linux-2.6.37.a/drivers/media/video/saa7164//saa7164-dvb.c 2011-01-05 01:50:19.000000000 +0100
+++ linux-2.6.37/drivers/media/video/saa7164//saa7164-dvb.c 2011-01-06 16:16:56.000000000 +0100
@@ -475,6 +475,7 @@
case SAA7164_BOARD_HAUPPAUGE_HVR2200:
case SAA7164_BOARD_HAUPPAUGE_HVR2200_2:
case SAA7164_BOARD_HAUPPAUGE_HVR2200_3:
+ case SAA7164_BOARD_HAUPPAUGE_HVR2200_4:
i2c_bus = &dev->i2c_bus[port->nr + 1];
switch (port->nr) {
case 0:
diff -x '*.o' -x '*.ko' -x '*.cmd' -x '*.mod.*' -ru linux-2.6.37.a/drivers/media/video/saa7164//saa7164-encoder.c linux-2.6.37/drivers/media/video/saa7164//saa7164-encoder.c
--- linux-2.6.37.a/drivers/media/video/saa7164//saa7164-encoder.c 2011-01-05 01:50:19.000000000 +0100
+++ linux-2.6.37/drivers/media/video/saa7164//saa7164-encoder.c 2011-01-08 16:11:04.000000000 +0100
@@ -32,7 +32,25 @@
}, {
.name = "NTSC-JP",
.id = V4L2_STD_NTSC_M_JP,
- }
+ }, {
+ .name = "PAL-I",
+ .id = V4L2_STD_PAL_I,
+ }, {
+ .name = "PAL-M",
+ .id = V4L2_STD_PAL_M,
+ }, {
+ .name = "PAL-N",
+ .id = V4L2_STD_PAL_N,
+ }, {
+ .name = "PAL-Nc",
+ .id = V4L2_STD_PAL_Nc,
+ }, {
+ .name = "PAL-B",
+ .id = V4L2_STD_PAL_B,
+ }, {
+ .name = "PAL-DK",
+ .id = V4L2_STD_PAL_DK,
+ }
};
static const u32 saa7164_v4l2_ctrls[] = {
@@ -1359,7 +1377,7 @@
.ioctl_ops = &mpeg_ioctl_ops,
.minor = -1,
.tvnorms = SAA7164_NORMS,
- .current_norm = V4L2_STD_NTSC_M,
+ .current_norm = V4L2_STD_PAL_B,
};
static struct video_device *saa7164_encoder_alloc(
@@ -1407,7 +1425,7 @@
/* Establish encoder defaults here */
/* Set default TV standard */
- port->encodernorm = saa7164_tvnorms[0];
+ port->encodernorm = saa7164_tvnorms[6];
port->width = 720;
port->mux_input = 1; /* Composite */
port->video_format = EU_VIDEO_FORMAT_MPEG_2;
diff -x '*.o' -x '*.ko' -x '*.cmd' -x '*.mod.*' -ru linux-2.6.37.a/drivers/media/video/saa7164//saa7164-fw.c linux-2.6.37/drivers/media/video/saa7164//saa7164-fw.c
--- linux-2.6.37.a/drivers/media/video/saa7164//saa7164-fw.c 2011-01-05 01:50:19.000000000 +0100
+++ linux-2.6.37/drivers/media/video/saa7164//saa7164-fw.c 2011-01-08 16:13:11.000000000 +0100
@@ -29,6 +29,9 @@
#define SAA7164_REV3_FIRMWARE "NXP7164-2010-03-10.1.fw"
#define SAA7164_REV3_FIRMWARE_SIZE 4019072
+//#define SAA7164_REV3_FIRMWARE "v4l-saa7164-1.0.3-3.fw"
+//#define SAA7164_REV3_FIRMWARE_SIZE 4038864
+
struct fw_header {
u32 firmwaresize;
diff -x '*.o' -x '*.ko' -x '*.cmd' -x '*.mod.*' -ru linux-2.6.37.a/drivers/media/video/saa7164//saa7164.h linux-2.6.37/drivers/media/video/saa7164//saa7164.h
--- linux-2.6.37.a/drivers/media/video/saa7164//saa7164.h 2011-01-05 01:50:19.000000000 +0100
+++ linux-2.6.37/drivers/media/video/saa7164//saa7164.h 2011-01-06 23:13:06.000000000 +0100
@@ -83,6 +83,7 @@
#define SAA7164_BOARD_HAUPPAUGE_HVR2200_3 6
#define SAA7164_BOARD_HAUPPAUGE_HVR2250_2 7
#define SAA7164_BOARD_HAUPPAUGE_HVR2250_3 8
+#define SAA7164_BOARD_HAUPPAUGE_HVR2200_4 9
#define SAA7164_MAX_UNITS 8
#define SAA7164_TS_NUMBER_OF_LINES 312
@@ -113,7 +114,7 @@
#define DBGLVL_THR 4096
#define DBGLVL_CPU 8192
-#define SAA7164_NORMS (V4L2_STD_NTSC_M | V4L2_STD_NTSC_M_JP | V4L2_STD_NTSC_443)
+#define SAA7164_NORMS (V4L2_STD_NTSC_M | V4L2_STD_NTSC_M_JP | V4L2_STD_NTSC_443 | V4L2_STD_PAL_I | V4L2_STD_PAL_M | V4L2_STD_PAL_N | V4L2_STD_PAL_Nc | V4L2_STD_PAL_B | V4L2_STD_PAL_DK)
enum port_t {
SAA7164_MPEG_UNDEFINED = 0,
diff -x '*.o' -x '*.ko' -x '*.cmd' -x '*.mod.*' -ru linux-2.6.37.a/drivers/media/video/saa7164//saa7164-vbi.c linux-2.6.37/drivers/media/video/saa7164//saa7164-vbi.c
--- linux-2.6.37.a/drivers/media/video/saa7164//saa7164-vbi.c 2011-01-05 01:50:19.000000000 +0100
+++ linux-2.6.37/drivers/media/video/saa7164//saa7164-vbi.c 2011-01-08 15:30:50.000000000 +0100
@@ -28,7 +28,25 @@
}, {
.name = "NTSC-JP",
.id = V4L2_STD_NTSC_M_JP,
- }
+ }, {
+ .name = "PAL-I",
+ .id = V4L2_STD_PAL_I,
+ }, {
+ .name = "PAL-M",
+ .id = V4L2_STD_PAL_M,
+ }, {
+ .name = "PAL-N",
+ .id = V4L2_STD_PAL_N,
+ }, {
+ .name = "PAL-Nc",
+ .id = V4L2_STD_PAL_Nc,
+ }, {
+ .name = "PAL-B",
+ .id = V4L2_STD_PAL_B,
+ }, {
+ .name = "PAL-DK",
+ .id = V4L2_STD_PAL_DK,
+ }
};
static const u32 saa7164_v4l2_ctrls[] = {
