The ene_ir driver was using a private define of MS_TO_NS, which is meant
to be microseconds to nanoseconds. The mceusb driver copied it,
intending to use is a milliseconds to microseconds. Lets move the
defines to a common location, expand and standardize them a touch, so
that we now have:
MS_TO_NS - milliseconds to nanoseconds
MS_TO_US - milliseconds to microseconds
US_TO_NS - microseconds to nanoseconds
Reported-by: David HÃrdeman <david@xxxxxxxxxxx>
CC: Maxim Levitsky <maximlevitsky@xxxxxxxxx>
Signed-off-by: Jarod Wilson <jarod@xxxxxxxxxx>
---
drivers/media/rc/ene_ir.c | 16 ++++++++--------
drivers/media/rc/ene_ir.h | 2 --
drivers/media/rc/mceusb.c | 7 +++----
include/media/rc-core.h | 3 +++
4 files changed, 14 insertions(+), 14 deletions(-)
diff --git a/drivers/media/rc/ene_ir.c b/drivers/media/rc/ene_ir.c
index 885abdd..1ac4913 100644
--- a/drivers/media/rc/ene_ir.c
+++ b/drivers/media/rc/ene_ir.c
@@ -446,27 +446,27 @@ static void ene_rx_setup(struct ene_device *dev)
select_timeout:
if (dev->rx_fan_input_inuse) {
- dev->rdev->rx_resolution = MS_TO_NS(ENE_FW_SAMPLE_PERIOD_FAN);
+ dev->rdev->rx_resolution = US_TO_NS(ENE_FW_SAMPLE_PERIOD_FAN);
/* Fan input doesn't support timeouts, it just ends the
input with a maximum sample */
dev->rdev->min_timeout = dev->rdev->max_timeout =
- MS_TO_NS(ENE_FW_SMPL_BUF_FAN_MSK *
+ US_TO_NS(ENE_FW_SMPL_BUF_FAN_MSK *
ENE_FW_SAMPLE_PERIOD_FAN);
} else {
- dev->rdev->rx_resolution = MS_TO_NS(sample_period);
+ dev->rdev->rx_resolution = US_TO_NS(sample_period);
/* Theoreticly timeout is unlimited, but we cap it
* because it was seen that on one device, it
* would stop sending spaces after around 250 msec.
* Besides, this is close to 2^32 anyway and timeout is u32.
*/
- dev->rdev->min_timeout = MS_TO_NS(127 * sample_period);
- dev->rdev->max_timeout = MS_TO_NS(200000);
+ dev->rdev->min_timeout = US_TO_NS(127 * sample_period);
+ dev->rdev->max_timeout = US_TO_NS(200000);
}
if (dev->hw_learning_and_tx_capable)
- dev->rdev->tx_resolution = MS_TO_NS(sample_period);
+ dev->rdev->tx_resolution = US_TO_NS(sample_period);
if (dev->rdev->timeout > dev->rdev->max_timeout)
dev->rdev->timeout = dev->rdev->max_timeout;
@@ -801,7 +801,7 @@ static irqreturn_t ene_isr(int irq, void *data)
dbg("RX: %d (%s)", hw_sample, pulse ? "pulse" : "space");
- ev.duration = MS_TO_NS(hw_sample);
+ ev.duration = US_TO_NS(hw_sample);
ev.pulse = pulse;
ir_raw_event_store_with_filter(dev->rdev, &ev);
}
@@ -821,7 +821,7 @@ static void ene_setup_default_settings(struct ene_device *dev)
dev->learning_mode_enabled = learning_mode_force;
/* Set reasonable default timeout */
- dev->rdev->timeout = MS_TO_NS(150000);
+ dev->rdev->timeout = US_TO_NS(150000);
}
/* Upload all hardware settings at once. Used at load and resume time */
diff --git a/drivers/media/rc/ene_ir.h b/drivers/media/rc/ene_ir.h
index c179baf..337a41d 100644
--- a/drivers/media/rc/ene_ir.h
+++ b/drivers/media/rc/ene_ir.h
@@ -201,8 +201,6 @@
#define dbg_verbose(format, ...) __dbg(2, format, ## __VA_ARGS__)
#define dbg_regs(format, ...) __dbg(3, format, ## __VA_ARGS__)
-#define MS_TO_NS(msec) ((msec) * 1000)
-
struct ene_device {
struct pnp_dev *pnp_dev;
struct rc_dev *rdev;
diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c
index 0fef6ef..2d91134 100644
--- a/drivers/media/rc/mceusb.c
+++ b/drivers/media/rc/mceusb.c
@@ -48,7 +48,6 @@
#define USB_BUFLEN 32 /* USB reception buffer length */
#define USB_CTRL_MSG_SZ 2 /* Size of usb ctrl msg on gen1 hw */
#define MCE_G1_INIT_MSGS 40 /* Init messages on gen1 hw to throw out */
-#define MS_TO_NS(msec) ((msec) * 1000)
/* MCE constants */
#define MCE_CMDBUF_SIZE 384 /* MCE Command buffer length */
@@ -817,7 +816,7 @@ static void mceusb_handle_command(struct mceusb_dev *ir, int index)
switch (ir->buf_in[index]) {
/* 2-byte return value commands */
case MCE_CMD_S_TIMEOUT:
- ir->rc->timeout = MS_TO_NS((hi << 8 | lo) / 2);
+ ir->rc->timeout = MS_TO_US((hi << 8 | lo) / 2);
break;
/* 1-byte return value commands */
@@ -858,7 +857,7 @@ static void mceusb_process_ir_data(struct mceusb_dev *ir, int buf_len)
ir->rem--;
rawir.pulse = ((ir->buf_in[i] & MCE_PULSE_BIT) != 0);
rawir.duration = (ir->buf_in[i] & MCE_PULSE_MASK)
- * MS_TO_NS(MCE_TIME_UNIT);
+ * MS_TO_US(MCE_TIME_UNIT);
dev_dbg(ir->dev, "Storing %s with duration %d\n",
rawir.pulse ? "pulse" : "space",
@@ -1061,7 +1060,7 @@ static struct rc_dev *mceusb_init_rc_dev(struct mceusb_dev *ir)
rc->priv = ir;
rc->driver_type = RC_DRIVER_IR_RAW;
rc->allowed_protos = RC_TYPE_ALL;
- rc->timeout = MS_TO_NS(1000);
+ rc->timeout = MS_TO_US(1000);
if (!ir->flags.no_tx) {
rc->s_tx_mask = mceusb_set_tx_mask;
rc->s_tx_carrier = mceusb_set_tx_carrier;
diff --git a/include/media/rc-core.h b/include/media/rc-core.h
index a23c1fc..2963263 100644
--- a/include/media/rc-core.h
+++ b/include/media/rc-core.h
@@ -183,6 +183,9 @@ static inline void init_ir_raw_event(struct ir_raw_event *ev)
}
#define IR_MAX_DURATION 0xFFFFFFFF /* a bit more than 4 seconds */
+#define US_TO_NS(usec) ((usec) * 1000)
+#define MS_TO_US(msec) ((msec) * 1000)
+#define MS_TO_NS(msec) ((msec) * 1000 * 1000)
void ir_raw_event_handle(struct rc_dev *dev);
int ir_raw_event_store(struct rc_dev *dev, struct ir_raw_event *ev);
--
1.7.3.4
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
