When the RPF/WPF units are used for ISP interfacing through
the IIF, the set of accessible registers is limited compared to
the regular VSPD operations.
Support ISP interfacing in the rpf and wpf entities by checking if
the pipe features an IIF instance and writing only the relevant
registers.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@xxxxxxxxxxxxxxxx>
---
drivers/media/platform/renesas/vsp1/vsp1_rpf.c | 9 ++++++++-
drivers/media/platform/renesas/vsp1/vsp1_wpf.c | 14 ++++++++++----
2 files changed, 18 insertions(+), 5 deletions(-)
diff --git a/drivers/media/platform/renesas/vsp1/vsp1_rpf.c b/drivers/media/platform/renesas/vsp1/vsp1_rpf.c
index 056491286577..6f6cf70e267b 100644
--- a/drivers/media/platform/renesas/vsp1/vsp1_rpf.c
+++ b/drivers/media/platform/renesas/vsp1/vsp1_rpf.c
@@ -84,7 +84,7 @@ static void rpf_configure_stream(struct vsp1_entity *entity,
sink_format = v4l2_subdev_state_get_format(state, RWPF_PAD_SINK);
source_format = v4l2_subdev_state_get_format(state, RWPF_PAD_SOURCE);
- infmt = VI6_RPF_INFMT_CIPM
+ infmt = (pipe->iif ? 0 : VI6_RPF_INFMT_CIPM)
| (fmtinfo->hwfmt << VI6_RPF_INFMT_RDFMT_SHIFT);
if (fmtinfo->swap_yc)
@@ -98,6 +98,13 @@ static void rpf_configure_stream(struct vsp1_entity *entity,
vsp1_rpf_write(rpf, dlb, VI6_RPF_INFMT, infmt);
vsp1_rpf_write(rpf, dlb, VI6_RPF_DSWAP, fmtinfo->swap);
+ /* No further configuration for VSPX. */
+ if (pipe->iif) {
+ /* VSPX wants alpha_sel to be set to 0. */
+ vsp1_rpf_write(rpf, dlb, VI6_RPF_ALPH_SEL, 0);
+ return;
+ }
+
if (entity->vsp1->info->gen == 4) {
u32 ext_infmt0;
u32 ext_infmt1;
diff --git a/drivers/media/platform/renesas/vsp1/vsp1_wpf.c b/drivers/media/platform/renesas/vsp1/vsp1_wpf.c
index a32e4b3527db..fafef9eeb3f8 100644
--- a/drivers/media/platform/renesas/vsp1/vsp1_wpf.c
+++ b/drivers/media/platform/renesas/vsp1/vsp1_wpf.c
@@ -247,8 +247,11 @@ static void wpf_configure_stream(struct vsp1_entity *entity,
sink_format = v4l2_subdev_state_get_format(state, RWPF_PAD_SINK);
source_format = v4l2_subdev_state_get_format(state, RWPF_PAD_SOURCE);
- /* Format */
- if (!pipe->lif || wpf->writeback) {
+ /*
+ * Format configuration. Skip for IIF (VSPX) or if the pipe doesn't
+ * write to memory.
+ */
+ if (!pipe->iif && (!pipe->lif || wpf->writeback)) {
const struct v4l2_pix_format_mplane *format = &wpf->format;
const struct vsp1_format_info *fmtinfo = wpf->fmtinfo;
@@ -291,7 +294,7 @@ static void wpf_configure_stream(struct vsp1_entity *entity,
* Sources. If the pipeline has a single input and BRx is not used,
* configure it as the master layer. Otherwise configure all
* inputs as sub-layers and select the virtual RPF as the master
- * layer.
+ * layer. For VSPX configure the enabled sources as masters.
*/
for (i = 0; i < vsp1->info->rpf_count; ++i) {
struct vsp1_rwpf *input = pipe->inputs[i];
@@ -299,7 +302,7 @@ static void wpf_configure_stream(struct vsp1_entity *entity,
if (!input)
continue;
- srcrpf |= (!pipe->brx && pipe->num_inputs == 1)
+ srcrpf |= (pipe->iif || (!pipe->brx && pipe->num_inputs == 1))
? VI6_WPF_SRCRPF_RPF_ACT_MST(input->entity.index)
: VI6_WPF_SRCRPF_RPF_ACT_SUB(input->entity.index);
}
@@ -316,6 +319,9 @@ static void wpf_configure_stream(struct vsp1_entity *entity,
vsp1_dl_body_write(dlb, VI6_WPF_IRQ_ENB(index),
VI6_WPF_IRQ_ENB_DFEE);
+ if (pipe->iif)
+ return;
+
/*
* Configure writeback for display pipelines (the wpf writeback flag is
* never set for memory-to-memory pipelines). Start by adding a chained
--
2.48.1
