Em 30-12-2010 10:36, Andy Walls escreveu:
> On Thu, 2010-12-30 at 09:45 -0200, Mauro Carvalho Chehab wrote:
>> lirc-i2c implements a get key logic for the Adaptec Remote
>> Controller, at address 0x6b. The only driver that seems to have
>> an Adaptec device is ivtv:
>>
>> $ git grep -i adaptec drivers/media
>> drivers/media/video/cs53l32a.c: * cs53l32a (Adaptec AVC-2010 and AVC-2410) i2c ivtv driver.
>> drivers/media/video/cs53l32a.c: * Audio source switching for Adaptec AVC-2410 added by Trev Jackson
>> drivers/media/video/cs53l32a.c: /* Set cs53l32a internal register for Adaptec 2010/2410 setup */
>> drivers/media/video/ivtv/ivtv-cards.c:/* Adaptec VideOh! AVC-2410 card */
>> drivers/media/video/ivtv/ivtv-cards.c: { PCI_DEVICE_ID_IVTV16, IVTV_PCI_ID_ADAPTEC, 0x0093 },
>> drivers/media/video/ivtv/ivtv-cards.c: .name = "Adaptec VideOh! AVC-2410",
>> drivers/media/video/ivtv/ivtv-cards.c:/* Adaptec VideOh! AVC-2010 card */
>> drivers/media/video/ivtv/ivtv-cards.c: { PCI_DEVICE_ID_IVTV16, IVTV_PCI_ID_ADAPTEC, 0x0092 },
>> drivers/media/video/ivtv/ivtv-cards.c: .name = "Adaptec VideOh! AVC-2010",
>> drivers/media/video/ivtv/ivtv-cards.h:#define IVTV_CARD_AVC2410 7 /* Adaptec AVC-2410 */
>> drivers/media/video/ivtv/ivtv-cards.h:#define IVTV_CARD_AVC2010 8 /* Adaptec AVD-2010 (No Tuner) */
>> drivers/media/video/ivtv/ivtv-cards.h:#define IVTV_PCI_ID_ADAPTEC 0x9005
>> drivers/media/video/ivtv/ivtv-driver.c: "\t\t\t 8 = Adaptec AVC-2410\n"
>> drivers/media/video/ivtv/ivtv-driver.c: "\t\t\t 9 = Adaptec AVC-2010\n"
>> drivers/media/video/ivtv/ivtv-i2c.c: 0x6b, /* Adaptec IR */
>>
>> There are two Adaptec cards defined there, but only one has tuner.
>> I never found any device without tuners, but with a remote controllers, so
>> the logic at lirc_i2c seems to be for Adaptec AVC-2410.
>>
>> As we'll remove lirc_i2c from kernel, move the getkey code to ivtv driver, and
>> use it for AVC2410.
>>
>> Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
>
> Mauro,
>
> This patch is missing a few things, so it won't work.
> The required - and some desired - changes are in the comments below.
>
>
>> diff --git a/drivers/media/video/ivtv/ivtv-i2c.c b/drivers/media/video/ivtv/ivtv-i2c.c
>> index 6817092..8d1b016 100644
>> --- a/drivers/media/video/ivtv/ivtv-i2c.c
>> +++ b/drivers/media/video/ivtv/ivtv-i2c.c
>> @@ -94,6 +94,7 @@
>> #define IVTV_HAUP_INT_IR_RX_I2C_ADDR 0x18
>> #define IVTV_Z8F0811_IR_TX_I2C_ADDR 0x70
>> #define IVTV_Z8F0811_IR_RX_I2C_ADDR 0x71
>> +#define IVTV_ADAPTEC_IR 0x6b
>
> For consistency with the other defines for I2C addresses, please rename
> this to "IVTV_ADAPTEC_IR_I2C_ADDR"
>
>
>> /* This array should match the IVTV_HW_ defines */
>> static const u8 hw_addrs[] = {
>> @@ -118,6 +119,7 @@ static const u8 hw_addrs[] = {
>> IVTV_HAUP_INT_IR_RX_I2C_ADDR, /* IVTV_HW_I2C_IR_RX_HAUP_INT */
>> IVTV_Z8F0811_IR_TX_I2C_ADDR, /* IVTV_HW_Z8F0811_IR_TX_HAUP */
>> IVTV_Z8F0811_IR_RX_I2C_ADDR, /* IVTV_HW_Z8F0811_IR_RX_HAUP */
>> + IVTV_ADAPTEC_IR,
>> };
>
> Please add this comment to the right of the new entry: /* IVTV_HW_I2C_IR_RX_ADAPTEC */
>
>
> You will need to add in ivtv-cards.h:
>
> #define IVTV_HW_I2C_IR_RX_ADAPTEC (1 << 21)
>
> and modify this define in ivtv-cards.h
>
> #define IVTV_HW_IR_RX_ANY (IVTV_HW_I2C_IR_RX_AVER | \
> IVTV_HW_I2C_IR_RX_HAUP_EXT | \
> IVTV_HW_I2C_IR_RX_HAUP_INT | \
> IVTV_HW_Z8F0811_IR_RX_HAUP | \
> IVTV_HW_I2C_IR_RX_ADAPTEC)
>
> In ivtv-cards.c, for the "ivtv_card_avc2410" entry, you must modify the
> ".hw_all" to be:
>
> .hw_all = IVTV_HW_MSP34XX | IVTV_HW_CS53L32A |
> IVTV_HW_SAA7115 | IVTV_HW_TUNER |
> IVTV_HW_I2C_IR_RX_ADAPTEC,
>
>
>> /* This array should match the IVTV_HW_ defines */
>> @@ -145,6 +147,31 @@ static const char * const hw_devicenames[] = {
>> "ir_rx_z8f0811_haup", /* IVTV_HW_Z8F0811_IR_RX_HAUP */
>> };
>
> To avoid walking off the end of "hw_devicenames[]", you will need to add
> a new entry to the end of "hw_devicenames[]":
>
> "ir_video", /* IVTV_HW_I2C_IR_RX_ADAPTEC */
>
>> +static int get_key_adaptec(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
>> +{
>> + unsigned char keybuf[4];
>> +
>> + keybuf[0] = 0x00;
>> + i2c_master_send(ir->c, keybuf, 1);
>> + /* poll IR chip */
>> + if (i2c_master_recv(ir->c, keybuf, sizeof(keybuf)) != sizeof(keybuf)) {
>> + return 0;
>> + }
>> +
>> + /* key pressed ? */
>> + if (keybuf[2] == 0xff)
>> + return 0;
>> +
>> + /* remove repeat bit */
>> + keybuf[2] &= 0x7f;
>> + keybuf[3] |= 0x80;
>> +
>> + *ir_key = (u32) keybuf;
>> + *ir_raw = (u32) keybuf;
>> +
>> + return 1;
>> +}
>> +
>> static int ivtv_i2c_new_ir(struct ivtv *itv, u32 hw, const char *type, u8 addr)
>> {
>> struct i2c_board_info info;
>> @@ -190,6 +217,12 @@ static int ivtv_i2c_new_ir(struct ivtv *itv, u32 hw, const char *type, u8 addr)
>> init_data->type = RC_TYPE_RC5;
>> init_data->name = itv->card_name;
>> break;
>> + case IVTV_CARD_AVC2410:
>
> You are switching on a value from a different set. Instead use:
>
> case IVTV_HW_I2C_IR_RX_ADAPTEC:
>
>
>> + init_data->ir_codes = RC_MAP_EMPTY;
>> + init_data->get_key = get_key_adaptec;
>> + init_data->type = RC_TYPE_UNKNOWN;
>> + init_data->name = itv->card_name;
>> + break;
>
> Please add a /*FIXME */ comment here, so that I will remember to figure
> out the default keymap and RC protocol type.
>
> Regards,
> Andy
Thanks for the review. Version 3 of the patch enclosed.
commit 8576bd14361ec75c91ddfb49cc2df389143cf06a
Author: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
Date: Thu Dec 30 09:31:10 2010 -0200
[media] ivtv: Add Adaptec Remote Controller
lirc-i2c implements a get key logic for the Adaptec Remote
Controller, at address 0x6b. The only driver that seems to have
an Adaptec device is ivtv:
$ git grep -i adaptec drivers/media
drivers/media/video/cs53l32a.c: * cs53l32a (Adaptec AVC-2010 and AVC-2410) i2c ivtv driver.
drivers/media/video/cs53l32a.c: * Audio source switching for Adaptec AVC-2410 added by Trev Jackson
drivers/media/video/cs53l32a.c: /* Set cs53l32a internal register for Adaptec 2010/2410 setup */
drivers/media/video/ivtv/ivtv-cards.c:/* Adaptec VideOh! AVC-2410 card */
drivers/media/video/ivtv/ivtv-cards.c: { PCI_DEVICE_ID_IVTV16, IVTV_PCI_ID_ADAPTEC, 0x0093 },
drivers/media/video/ivtv/ivtv-cards.c: .name = "Adaptec VideOh! AVC-2410",
drivers/media/video/ivtv/ivtv-cards.c:/* Adaptec VideOh! AVC-2010 card */
drivers/media/video/ivtv/ivtv-cards.c: { PCI_DEVICE_ID_IVTV16, IVTV_PCI_ID_ADAPTEC, 0x0092 },
drivers/media/video/ivtv/ivtv-cards.c: .name = "Adaptec VideOh! AVC-2010",
drivers/media/video/ivtv/ivtv-cards.h:#define IVTV_CARD_AVC2410 7 /* Adaptec AVC-2410 */
drivers/media/video/ivtv/ivtv-cards.h:#define IVTV_CARD_AVC2010 8 /* Adaptec AVD-2010 (No Tuner) */
drivers/media/video/ivtv/ivtv-cards.h:#define IVTV_PCI_ID_ADAPTEC 0x9005
drivers/media/video/ivtv/ivtv-driver.c: "\t\t\t 8 = Adaptec AVC-2410\n"
drivers/media/video/ivtv/ivtv-driver.c: "\t\t\t 9 = Adaptec AVC-2010\n"
drivers/media/video/ivtv/ivtv-i2c.c: 0x6b, /* Adaptec IR */
There are two Adaptec cards defined there, but AVC-2010 doesn't have a
remote controller. So, the logic at lirc_i2c seems to be for Adaptec AVC-2410.
As we'll remove lirc_i2c from kernel, move the getkey code to ivtv driver, and
use it for AVC-2410.
Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
diff --git a/drivers/media/video/ivtv/ivtv-cards.c b/drivers/media/video/ivtv/ivtv-cards.c
index b6f2a2b..145e474 100644
--- a/drivers/media/video/ivtv/ivtv-cards.c
+++ b/drivers/media/video/ivtv/ivtv-cards.c
@@ -405,7 +405,8 @@ static const struct ivtv_card ivtv_card_avc2410 = {
.hw_audio_ctrl = IVTV_HW_MSP34XX,
.hw_muxer = IVTV_HW_CS53L32A,
.hw_all = IVTV_HW_MSP34XX | IVTV_HW_CS53L32A |
- IVTV_HW_SAA7115 | IVTV_HW_TUNER,
+ IVTV_HW_SAA7115 | IVTV_HW_TUNER |
+ IVTV_HW_I2C_IR_RX_ADAPTEC,
.video_inputs = {
{ IVTV_CARD_INPUT_VID_TUNER, 0, IVTV_SAA71XX_COMPOSITE4 },
{ IVTV_CARD_INPUT_SVIDEO1, 1, IVTV_SAA71XX_SVIDEO0 },
diff --git a/drivers/media/video/ivtv/ivtv-cards.h b/drivers/media/video/ivtv/ivtv-cards.h
index 78eca99..e6f5c02 100644
--- a/drivers/media/video/ivtv/ivtv-cards.h
+++ b/drivers/media/video/ivtv/ivtv-cards.h
@@ -111,6 +111,7 @@
#define IVTV_HW_I2C_IR_RX_HAUP_INT (1 << 18)
#define IVTV_HW_Z8F0811_IR_TX_HAUP (1 << 19)
#define IVTV_HW_Z8F0811_IR_RX_HAUP (1 << 20)
+#define IVTV_HW_I2C_IR_RX_ADAPTEC (1 << 21)
#define IVTV_HW_Z8F0811_IR_HAUP (IVTV_HW_Z8F0811_IR_RX_HAUP | \
IVTV_HW_Z8F0811_IR_TX_HAUP)
@@ -120,7 +121,8 @@
#define IVTV_HW_IR_RX_ANY (IVTV_HW_I2C_IR_RX_AVER | \
IVTV_HW_I2C_IR_RX_HAUP_EXT | \
IVTV_HW_I2C_IR_RX_HAUP_INT | \
- IVTV_HW_Z8F0811_IR_RX_HAUP)
+ IVTV_HW_Z8F0811_IR_RX_HAUP | \
+ IVTV_HW_I2C_IR_RX_ADAPTEC)
#define IVTV_HW_IR_TX_ANY (IVTV_HW_Z8F0811_IR_TX_HAUP)
diff --git a/drivers/media/video/ivtv/ivtv-i2c.c b/drivers/media/video/ivtv/ivtv-i2c.c
index 6817092..fb0ac68 100644
--- a/drivers/media/video/ivtv/ivtv-i2c.c
+++ b/drivers/media/video/ivtv/ivtv-i2c.c
@@ -94,6 +94,7 @@
#define IVTV_HAUP_INT_IR_RX_I2C_ADDR 0x18
#define IVTV_Z8F0811_IR_TX_I2C_ADDR 0x70
#define IVTV_Z8F0811_IR_RX_I2C_ADDR 0x71
+#define IVTV_ADAPTEC_IR_ADDR 0x6b
/* This array should match the IVTV_HW_ defines */
static const u8 hw_addrs[] = {
@@ -118,6 +119,7 @@ static const u8 hw_addrs[] = {
IVTV_HAUP_INT_IR_RX_I2C_ADDR, /* IVTV_HW_I2C_IR_RX_HAUP_INT */
IVTV_Z8F0811_IR_TX_I2C_ADDR, /* IVTV_HW_Z8F0811_IR_TX_HAUP */
IVTV_Z8F0811_IR_RX_I2C_ADDR, /* IVTV_HW_Z8F0811_IR_RX_HAUP */
+ IVTV_ADAPTEC_IR_ADDR, /* IVTV_HW_I2C_IR_RX_ADAPTEC */
};
/* This array should match the IVTV_HW_ defines */
@@ -143,8 +145,34 @@ static const char * const hw_devicenames[] = {
"ir_video", /* IVTV_HW_I2C_IR_RX_HAUP_INT */
"ir_tx_z8f0811_haup", /* IVTV_HW_Z8F0811_IR_TX_HAUP */
"ir_rx_z8f0811_haup", /* IVTV_HW_Z8F0811_IR_RX_HAUP */
+ "ir_adaptec", /* IVTV_HW_I2C_IR_RX_ADAPTEC */
};
+static int get_key_adaptec(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
+{
+ unsigned char keybuf[4];
+
+ keybuf[0] = 0x00;
+ i2c_master_send(ir->c, keybuf, 1);
+ /* poll IR chip */
+ if (i2c_master_recv(ir->c, keybuf, sizeof(keybuf)) != sizeof(keybuf)) {
+ return 0;
+ }
+
+ /* key pressed ? */
+ if (keybuf[2] == 0xff)
+ return 0;
+
+ /* remove repeat bit */
+ keybuf[2] &= 0x7f;
+ keybuf[3] |= 0x80;
+
+ *ir_key = (u32) keybuf;
+ *ir_raw = (u32) keybuf;
+
+ return 1;
+}
+
static int ivtv_i2c_new_ir(struct ivtv *itv, u32 hw, const char *type, u8 addr)
{
struct i2c_board_info info;
@@ -190,6 +218,13 @@ static int ivtv_i2c_new_ir(struct ivtv *itv, u32 hw, const char *type, u8 addr)
init_data->type = RC_TYPE_RC5;
init_data->name = itv->card_name;
break;
+ case IVTV_HW_I2C_IR_RX_ADAPTEC:
+ init_data->get_key = get_key_adaptec;
+ init_data->name = itv->card_name;
+ /* FIXME: The protocol and RC_MAP needs to be corrected */
+ init_data->ir_codes = RC_MAP_EMPTY;
+ init_data->type = RC_TYPE_UNKNOWN;
+ break;
}
memset(&info, 0, sizeof(struct i2c_board_info));
@@ -219,7 +254,6 @@ struct i2c_client *ivtv_i2c_new_ir_legacy(struct ivtv *itv)
0x1a, /* Hauppauge IR external - collides with WM8739 */
0x18, /* Hauppauge IR internal */
0x71, /* Hauppauge IR (PVR150) */
- 0x6b, /* Adaptec IR */
I2C_CLIENT_END
};
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
