Hi Mehdi,
On 3/4/25 20:41, Mehdi Djait wrote:
> Hi Michael,
>
> thank you for the patches.
>
> Sorry for the big delay!
No worries, thanks for your comments!
>
> On Wed, Feb 19, 2025 at 11:16:37AM +0100, Michael Riesch wrote:
>> The Rockchip RK3568 MIPI CSI-2 Host is a CSI-2 bridge with one input port
>> and one output port. It receives the data with the help of an external
>> MIPI PHY (C-PHY or D-PHY) and passes it to the Rockchip RK3568 Video
>> Capture (VICAP) block. Add a V4L2 subdevice driver for this unit.
>>
>> Signed-off-by: Michael Riesch <michael.riesch@xxxxxxxxxxxxxx>
>> ---
>> drivers/media/platform/rockchip/rkcif/Makefile | 1 +
>> .../platform/rockchip/rkcif/rkcif-mipi-csi-host.c | 731 +++++++++++++++++++++
>> 2 files changed, 732 insertions(+)
>>
>> diff --git a/drivers/media/platform/rockchip/rkcif/Makefile b/drivers/media/platform/rockchip/rkcif/Makefile
>> index 818424972c7b..0c18efd1f1b4 100644
>> --- a/drivers/media/platform/rockchip/rkcif/Makefile
>> +++ b/drivers/media/platform/rockchip/rkcif/Makefile
>> @@ -4,4 +4,5 @@ rockchip-cif-objs += rkcif-dev.o \
>> rkcif-capture-dvp.o \
>> rkcif-capture-mipi.o \
>> rkcif-interface.o \
>> + rkcif-mipi-csi-host.o \
>
> [..]
>
>> rkcif-stream.o
>> diff --git a/drivers/media/platform/rockchip/rkcif/rkcif-mipi-csi-host.c b/drivers/media/platform/rockchip/rkcif/rkcif-mipi-csi-host.c
>> new file mode 100644
>> index 000000000000..fa3f42b2dc55
>
> SNIP
>
>> --- /dev/null
>> +++ b/drivers/media/platform/rockchip/rkcif/rkcif-mipi-csi-host.c
>> +
>> +static struct platform_driver rkcif_csi_drv = {
>> + .driver = {
>> + .name = "rockchip-mipi-csi",
>> + .of_match_table = rkcif_csi_of_match,
>> + .pm = &rkcif_csi_pm_ops,
>> + },
>> + .probe = rkcif_csi_probe,
>> + .remove = rkcif_csi_remove,
>> +};
>> +module_platform_driver(rkcif_csi_drv);
>
> [..]
>
> When adding the driver for this CSI-2 Host bridge, you added another
> call to module_platform_driver()
>
> but in the definition of this macro:
>
> "Each module may only use this macro once, and
> calling it replaces module_init() and module_exit()"
>
> and as you can see in the diff of the Makefile,
> rkcif-mipi-csi-host.0 is part of the same module as rkcif-dev.o, where
> you already call module_platform_driver()
Indeed. Found that only after submitting v4... :-/
> I think the solution here is to call
> platform_register_drivers(drivers, ARRAY_SIZE(drivers)) in rkcif-dev.c
>
> with
>
> static struct platform_driver * const drivers[] = {
> &rkcif_csi_drv,
> &rkcif_plat_drv,
> };
>
> then define module_init() and module_exit()
Ah, I haven't thought of that approach. Actually, I was going to split
the cif part and the mipi host part into two modules. This would keep
things modular (literally). What do you think about that?
>
> Btw. MODULE_DEVICE_TABLE() is missing both here and in rkcif-dev.c
Huh, indeed. Nice catch, thanks!
Best regards,
Michael
>
>> +
>> +MODULE_DESCRIPTION("Rockchip MIPI CSI-2 Host platform driver");
>> +MODULE_LICENSE("GPL");
>>
>> --
>> 2.34.1
>>
>
> --
> Kind Regards
> Mehdi Djait
