Print the PLL calculator flags right away when the PLL calculator is
called. Previously this was done only in a successful case and that didn't
really help solving a problem when one happened.
Signed-off-by: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
---
drivers/media/i2c/ccs-pll.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/media/i2c/ccs-pll.c b/drivers/media/i2c/ccs-pll.c
index 49cc4491ebdd..cf06414f8faa 100644
--- a/drivers/media/i2c/ccs-pll.c
+++ b/drivers/media/i2c/ccs-pll.c
@@ -123,8 +123,11 @@ static void print_pll(struct device *dev, struct ccs_pll *pll)
pll->pixel_rate_pixel_array);
dev_dbg(dev, "pixel rate on CSI-2 bus:\t%u\n",
pll->pixel_rate_csi);
+}
- dev_dbg(dev, "flags%s%s%s%s%s%s%s%s%s%s\n",
+static void print_pll_flags(struct device *dev, struct ccs_pll *pll)
+{
+ dev_dbg(dev, "PLL flags%s%s%s%s%s%s%s%s%s%s\n",
pll->flags & PLL_FL(LANE_SPEED_MODEL) ? " lane-speed" : "",
pll->flags & PLL_FL(LINK_DECOUPLED) ? " link-decoupled" : "",
pll->flags & PLL_FL(EXT_IP_PLL_DIVIDER) ?
@@ -737,6 +740,8 @@ int ccs_pll_calculate(struct device *dev, const struct ccs_pll_limits *lim,
u32 i;
int rval = -EINVAL;
+ print_pll_flags(dev, pll);
+
if (!(pll->flags & CCS_PLL_FLAG_LANE_SPEED_MODEL)) {
pll->op_lanes = 1;
pll->vt_lanes = 1;
--
2.39.5
