Hi everyone,
This patch series adds multiplane API support for the virtual M2M
driver, along with some minor driver refactoring/improvements.
I followed the lead of the vivid driver and made multiplanar support
selectable with a module parameter, and the default is to use the
single planar api.
Although there are not yet any pixelformats in the driver that make
use of multiple memory planes, adding support for these should be
easier now with the API level changes taken care of.
v4l2-compliance reports the following with multiplane support disabled:
Total for vim2m device /dev/video0: 48, Succeeded: 48, Failed: 0, Warnings: 0
and the same with multiplane support enabled:
Total for vim2m device /dev/video0: 48, Succeeded: 48, Failed: 0, Warnings: 0
Patches need to be applied in increasing numerical order (Patch [3/3]
depends on [1/3] and [2/3]).
Since the multi-plane changes had to touch a lot of the driver, I did
a basic regression test with the following script which generates a
test input image with vivid and an output image from vim2m for each
supported format. I confirmed all outputs visually and verified they
were identical to the outputs before the change. Testing was done on
an x86_64 qemu image.
#!/bin/sh
# tested with HDMI vivid emulation
# modprobe vivid num_inputs=1 input_types=3
vim2m=/dev/video0
vivid=/dev/video1
width=640
height=480
out_width=320
out_height=240
capture_formats=$(v4l2-ctl -d $vim2m --list-formats | awk '/\]:/ {print $2}' | sed "s/'//g")
output_formats=$(v4l2-ctl -d $vim2m --list-formats-out | awk '/\]:/ {print $2}' | sed "s/'//g")
# Turn off text mode so that images will be identical
v4l2-ctl -d $vivid -c osd_text_mode=2
for ofmt in ${output_formats}; do
# generate input image
inname="${width}x${height}.${ofmt}"
v4l2-ctl -d $vivid -v pixelformat=$ofmt,width=$width,height=$height,field=none \
--stream-mmap --stream-count=1 --stream-to=$inname
for cfmt in ${capture_formats}; do
outname="${out_width}x${out_height}-out.${cfmt}"
v4l2-ctl -d $vim2m -x pixelformat=$ofmt,width=$width,height=$height \
-v pixelformat=$cfmt,width=$out_width,height=$out_height \
--stream-from=$inname --stream-to=$outname --stream-mmap --stream-out-mmap \
--stream-count=1
done
done
Matthew Majewski (3):
media: v4l2-common: Add RGBR format info
media: vim2m: Simplify try_fmt
media: vim2m: Add parametized support for multiplanar API
drivers/media/test-drivers/vim2m.c | 327 +++++++++++++++++++++-----
drivers/media/v4l2-core/v4l2-common.c | 1 +
2 files changed, 274 insertions(+), 54 deletions(-)
--
2.25.1
