Hi,
this patch series contains the following bugfix and improvements
for the MT9M114 camera driver:
Changelog:
v1 -> v2:
- Fix the subjects of the patches
- Dropped PATCH 1 ("Add bypass-pll DT-binding") as it can be automatically
detected if the PLL should be bypassed.
- Renumbered patches accordingly
- Switch to uint32, add default value and clarify documentation in PATCH 1
- Add 'Fixes' and 'Cc' tags as suggested in PATCH 6
Link to v1 discussion:
https://lore.kernel.org/linux-media/20250226153929.274562-1-mathis.foerst@xxxxxx/
Bugfixes:
- Fix a deadlock when using the V4L2 pad-ops get/set_frame_interval
Compatibility:
- Implement the missing get_mbus_config() function to be compatible
with the i.MX6 camera framework
New Features:
- Bypass the internal PLL if EXTCLK matches the configured link_frequency
- Make the slew-rate of the output pads configurable via DT
- Allow to change the cropping configuration and the horizontal/vertical
flipping while the sensor is in streaming state
Thanks,
Mathis
Mathis Foerst (7):
media: dt-bindings: mt9m114: Add pad-slew-rate DT-binding
media: mt9m114: Add get_mbus_config
media: mt9m114: Bypass PLL if required
media: mt9m114: Factor out mt9m114_configure_pa
media: mt9m114: Allow set_selection while streaming
media: mt9m114: Fix deadlock in get_frame_interval/set_frame_interval
media: mt9m114: Set pad-slew-rate
.../bindings/media/i2c/onnn,mt9m114.yaml | 9 +
drivers/media/i2c/mt9m114.c | 193 +++++++++++++-----
2 files changed, 151 insertions(+), 51 deletions(-)
base-commit: ac9c34d1e45a4c25174ced4fc0cfc33ff3ed08c7
--
2.34.1
