Hi Geert,
Thanks for your review.
On Thu, Feb 27, 2025 at 11:33:16AM +0100, Geert Uytterhoeven wrote:
> Hi Tommaso,
>
> On Wed, 26 Feb 2025 at 16:25, Tommaso Merciai
> <tommaso.merciai.xr@xxxxxxxxxxxxxx> wrote:
> > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> >
> > The MIPI CSI-2 block on the Renesas RZ/V2H(P) SoC is similar to the one
> > found on the Renesas RZ/G2L SoC, with the following differences:
> > - A different D-PHY
> > - Additional registers for the MIPI CSI-2 link
> > - Only two clocks
> >
> > Add a new compatible string, `renesas,r9a09g057-csi2`, for the RZ/V2H(P)
> > SoC.
> >
> > Reviewed-by: Rob Herring (Arm) <robh@xxxxxxxxxx>
> > Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> > Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@xxxxxxxxxxxxxx>
>
> Thanks for your patch!
>
> > --- a/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml
> > +++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml
>
> > @@ -48,7 +58,8 @@ properties:
> > resets:
> > items:
> > - description: CRU_PRESETN reset terminal
> > - - description: CRU_CMN_RSTB reset terminal
> > + - description:
> > + CRU_CMN_RSTB reset terminal (all but RZ/V2H(P)) or D-PHY reset (RZ/V2H(P))
>
> According to the flowcharts[1] in the RZ/G2L, RZ/V2L, and RZ/G2UL
> documentation, CPG_RST_CRU.CRU_CMN_RSTB is the D-PHY reset on all of
> them, so I think you can just write "D-PHY reset".
> Or "D-PHY reset (CRU_CMN_RSTB or CRU_n_S_RESETN)"?
I personally vote for:
- D-PHY reset (CRU_CMN_RSTB or CRU_n_S_RESETN)
Thanks for the suggestion! :)
>
> [1] Section 35. Camera Data Receiving Unit (CRU)
> 35.3.1 Starting Reception for the MIPI CSI-2 Input
> 35.3.2.2Stopping the D-PHY (MIPI CSI-2 Input)
>
> Gr{oetje,eeting}s,
>
> Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
> -- Linus Torvalds
Regards,
Tommaso
