Add #define's for the "AEC MANUAL" (0x3503) register and its
values/flags. Use those in the registers single usage within the
`common_regs` struct.
All values are based on the OV9281 datasheet v1.01 (09.18.2015).
Signed-off-by: Richard Leitner <richard.leitner@xxxxxxxxx>
---
drivers/media/i2c/ov9282.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/media/i2c/ov9282.c b/drivers/media/i2c/ov9282.c
index c926842257893c4da3319b847fab9908b5bdaec6..c882a021cf18852237bf9b9524d3de0c5b48cbcb 100644
--- a/drivers/media/i2c/ov9282.c
+++ b/drivers/media/i2c/ov9282.c
@@ -44,6 +44,15 @@
#define OV9282_EXPOSURE_STEP 1
#define OV9282_EXPOSURE_DEFAULT 0x0282
+/* AEC/AGC manual */
+#define OV9282_REG_AEC_MANUAL 0x3503
+#define OV9282_DIGFRAC_GAIN_DELAY BIT(6)
+#define OV9282_GAIN_CHANGE_DELAY BIT(5)
+#define OV9282_GAIN_DELAY BIT(4)
+#define OV9282_GAIN_PREC16_EN BIT(3)
+#define OV9282_GAIN_MANUAL_AS_SENSGAIN BIT(2)
+#define OV9282_AEC_MANUAL_DEFAULT 0x00
+
/* Analog gain control */
#define OV9282_REG_AGAIN 0x3509
#define OV9282_AGAIN_MIN 0x10
@@ -214,7 +223,7 @@ static const struct ov9282_reg common_regs[] = {
{0x3030, 0x10},
{0x3039, 0x32},
{0x303a, 0x00},
- {0x3503, 0x08},
+ {OV9282_REG_AEC_MANUAL, OV9282_GAIN_PREC16_EN},
{0x3505, 0x8c},
{0x3507, 0x03},
{0x3508, 0x00},
--
2.47.2
