Hi Charles (linux-i2c added to cc) On Mon, 27 Dec 2010, Charles D. Krebs wrote: > Guennadi, > > I'm developing a driver for a video receiver chip that has register > banks on multiple I2C addresses on the same bus. The data output is > parallel and I will be connecting it to the sh host interface. > Overall, the device appears to be suitable as a client driver to > soc_camera. > > I'm following the model for the MT9T112 driver, and this works just fine > for communicating to any one of the device's I2C addresses. > > How would you recommend registering more than one I2C address to an > soc_camera client driver? Honestly - don't know. The soc-camera model for now is pretty simple and in some senses restrictive. But in principle, it should be possible to code your case within its scope too. One of the possibilities would be to register your platform data with one "main" i2c unit / address, and then let the sensor register the rest in its probe. Is your chip configuration fixed? Always the same number of i2c units with the same addresses? Or can it vary? Maybe something like a multi-function device (drivers/mfd) would suit your purpose well? In fact, I think, it shouldn't be too complicated. As suggested above, provide (but don't register, just follow other soc-camera platforms) one main i2c device in the platform data, register the rest in your main probe(), which will call your further probe()s. The easiest would be to keep just one soc-camera instance and one v4l2-subdeice, but if you want, you can explore the possibility of creating several v4l2-subdevices. Hope, this helps. Thanks Guennadi --- Guennadi Liakhovetski, Ph.D. Freelance Open-Source Software Developer http://www.open-technology.de/ -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
