The imx415 sensor has one more register for setting the output
format (10/12 bit), which is currently not in the driver.
The patch adds it.
Signed-off-by: Alexander Shiyan <eagle.alexander923@xxxxxxxxx>
---
drivers/media/i2c/imx415.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/media/i2c/imx415.c b/drivers/media/i2c/imx415.c
index 16a52900c61c..c5beba4da18b 100644
--- a/drivers/media/i2c/imx415.c
+++ b/drivers/media/i2c/imx415.c
@@ -77,6 +77,7 @@
#define IMX415_INCKSEL5 CCI_REG8(0x311e)
#define IMX415_DIG_CLP_MODE CCI_REG8(0x32c8)
#define IMX415_WRJ_OPEN CCI_REG8(0x3390)
+#define IMX415_ADBIT1 CCI_REG8(0x3701)
#define IMX415_SENSOR_INFO CCI_REG16_LE(0x3f12)
#define IMX415_SENSOR_INFO_MASK 0xfff
#define IMX415_CHIP_ID 0x514
@@ -581,6 +582,7 @@ static const struct cci_reg_sequence imx415_init_table[] = {
{ IMX415_REVERSE, 0x00 },
/* use RAW 10-bit mode */
{ IMX415_ADBIT, 0x00 },
+ { IMX415_ADBIT1, 0x00 },
{ IMX415_MDBIT, 0x00 },
/* output VSYNC on XVS and low on XHS */
{ IMX415_OUTSEL, 0x22 },
--
2.39.1
