Add SCU reset driver for i.MX8QM/i.MX8QXP. Add phy driver for mipi csi phy. Update binding doc. Update driver for imx8qxp and imx8qm. Add dts files for it. To: Vinod Koul <vkoul@xxxxxxxxxx> To: Kishon Vijay Abraham I <kishon@xxxxxxxxxx> To: Rob Herring <robh@xxxxxxxxxx> To: Krzysztof Kozlowski <krzk+dt@xxxxxxxxxx> To: Conor Dooley <conor+dt@xxxxxxxxxx> To: Shawn Guo <shawnguo@xxxxxxxxxx> To: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> To: Pengutronix Kernel Team <kernel@xxxxxxxxxxxxxx> To: Fabio Estevam <festevam@xxxxxxxxx> To: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx> To: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> To: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx> To: Rui Miguel Silva <rmfrfs@xxxxxxxxx> To: Martin Kepplinger <martink@xxxxxxxxx> To: Purism Kernel Team <kernel@xxxxxxx> Cc: linux-phy@xxxxxxxxxxxxxxxxxxx Cc: devicetree@xxxxxxxxxxxxxxx Cc: imx@xxxxxxxxxxxxxxx Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx Cc: linux-kernel@xxxxxxxxxxxxxxx Cc: linux-media@xxxxxxxxxxxxxxx Cc: Guoniu.zhou <guoniu.zhou@xxxxxxx> Cc: Robby Cai <robby.cai@xxxxxxx> Cc: Robert Chiras <robert.chiras@xxxxxxx> Signed-off-by: Frank Li <Frank.Li@xxxxxxx> --- Changes in v2: - move scu reset binding doc to top scu doc. - isi use seperate binding doc for imx8qxp and imx8qm. - phy and csi2, compatible string 8qm fallback to qxp - remove internal review tags - Link to v1: https://lore.kernel.org/r/20250131-8qxp_camera-v1-0-319402ab606a@xxxxxxx --- Frank Li (11): dt-bindings: phy: Add MIPI CSI PHY for i.MX8Q phy: freescale: Add MIPI CSI PHY driver for i.MX8Q dt-bindings: firmware: imx: add property reset-controller reset: imx: Add SCU reset driver for i.MX8QXP and i.MX8QM media: dt-bindings: Add binding doc for i.MX8QXP and i.MX8QM ISI media: nxp: imx8-isi: Allow num_sources to be greater than num_sink media: imx8mq-mipi-csi2: Add support for i.MX8QXP arm64: dts: imx8: add capture controller for i.MX8's img subsystem arm64: dts: imx8qm: add 24MHz clock-xtal24m arm64: dts: imx8q: add linux,cma node for imx8qm-mek and imx8qxp-mek arm64: dts: imx8q: add camera ov5640 support for imx8qm-mek and imx8qxp-mek Guoniu.zhou (1): media: imx8mq-mipi-csi2: Add imx8mq_plat_data for different compatible strings Robert Chiras (2): media: imx8-isi: Add support for i.MX8QM and i.MX8QXP media: dt-bindings: nxp,imx8mq-mipi-csi2: Add i.MX8QM(QXP) compatible strings .../devicetree/bindings/firmware/fsl,scu.yaml | 12 + .../devicetree/bindings/media/fsl,imx8qm-isi.yaml | 117 ++++++ .../devicetree/bindings/media/fsl,imx8qxp-isi.yaml | 103 ++++++ .../bindings/media/nxp,imx8mq-mipi-csi2.yaml | 34 +- .../bindings/phy/fsl,imx8qxp-mipi-cphy.yaml | 57 +++ MAINTAINERS | 1 + arch/arm64/boot/dts/freescale/Makefile | 12 + arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi | 391 +++++++++++++++++++++ .../boot/dts/freescale/imx8qm-mek-ov5640-csi0.dtso | 93 +++++ .../boot/dts/freescale/imx8qm-mek-ov5640-csi1.dtso | 93 +++++ arch/arm64/boot/dts/freescale/imx8qm-mek.dts | 60 ++++ arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi | 53 +++ arch/arm64/boot/dts/freescale/imx8qm.dtsi | 12 + .../boot/dts/freescale/imx8qxp-mek-ov5640-csi.dtso | 92 +++++ arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 44 +++ arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi | 60 ++++ arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 5 + .../media/platform/nxp/imx8-isi/imx8-isi-core.c | 47 +++ .../media/platform/nxp/imx8-isi/imx8-isi-core.h | 2 + .../platform/nxp/imx8-isi/imx8-isi-crossbar.c | 8 +- drivers/media/platform/nxp/imx8mq-mipi-csi2.c | 106 +++++- drivers/phy/freescale/Kconfig | 9 + drivers/phy/freescale/Makefile | 1 + drivers/phy/freescale/phy-fsl-imx8q-mipi-cphy.c | 185 ++++++++++ drivers/reset/Kconfig | 7 + drivers/reset/Makefile | 1 + drivers/reset/reset-imx-scu.c | 101 ++++++ 27 files changed, 1685 insertions(+), 21 deletions(-) --- base-commit: b830154e4d06a06e1312311147be924b4232dea0 change-id: 20250114-8qxp_camera-c1af5749d304 Best regards, --- Frank Li <Frank.Li@xxxxxxx>
