Add new properties for configuring FSYNC functionality and operation
mode, as the chip can support both tunneling and pixel modes.
While at it, add the maxim,max96724 compatible to the bindings since it
was already added in the driver some time back.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@xxxxxxxxxxx>
---
.../bindings/media/i2c/maxim,max96712.yaml | 45 +++++++++++++++++++
1 file changed, 45 insertions(+)
diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml
index 26f85151afbd3..410004f3a032f 100644
--- a/Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml
@@ -36,6 +36,48 @@ properties:
enable-gpios: true
+ '#gpio-cells':
+ const: 2
+ description: |
+ First cell is the GPIO pin number, second cell is the flags. The GPIO pin
+ number must be in range of [0, 11].
+
+ gpio-controller: true
+
+ maxim,operation-mode:
+ description: |
+ Deserializer mode of operation: 0 - tunneling mode, 1 - pixel mode
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+ default: 0
+
+ maxim,fsync-config:
+ description: |
+ Frame synchronization (FSYNC) is used to align images sent from multiple
+ sources in surround-view applications and is required for concatenation.
+ In FSYNC mode, the deserializer sends a sync signal to each serializer;
+ the serializers then send the signal to the connected sensor.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 2
+ items:
+ - description: |
+ FSYNC mode:
+ 0 - off, no FSYNC generation
+ 1 - internal, GPIO is not used as input or output
+ 2 - master, GPIO pin is used to drive a slave deserializer
+ 3 - slave, GPIO pin is used as FSYNC input driven by a master device
+ enum: [0, 1, 2, 3]
+ default: 0
+ - description: |
+ FSYNC TX ID: GPIO ID used for transmitting FSYNC signal
+ minimum: 0
+ maximum: 31
+ default: 0
+ - description: |
+ FSYNC pin: 0 - MFP0, 1 - MFP7. Not used for internal mode.
+ enum: [0, 1]
+ default: 0
+
ports:
$ref: /schemas/graph.yaml#/properties/ports
@@ -92,6 +134,9 @@ examples:
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/media/video-interfaces.h>
+ maxim,operation-mode = <0>;
+ maxim,fsync-config = <1 0>;
+
i2c@e6508000 {
#address-cells = <1>;
#size-cells = <0>;
--
2.44.1
