On Mon, 20 Jan 2025 at 10:11, Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx> wrote:
>
> Lift the xshutdown (enable) GPIO 1 ms after enabling the regulators, as
> required by the sensor's power-up sequence.
>
> Fixes: d30bb512da3d ("media: Add a driver for the ov7251 camera sensor")
> Cc: stable@xxxxxxxxxxxxxxx
> Signed-off-by: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
Reviewed-by: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
> ---
> drivers/media/i2c/ov7251.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/media/i2c/ov7251.c b/drivers/media/i2c/ov7251.c
> index f3e2d26bb840..3226888d77e9 100644
> --- a/drivers/media/i2c/ov7251.c
> +++ b/drivers/media/i2c/ov7251.c
> @@ -922,6 +922,8 @@ static int ov7251_set_power_on(struct device *dev)
> return ret;
> }
>
> + usleep_range(1000, 1100);
> +
> gpiod_set_value_cansleep(ov7251->enable_gpio, 1);
>
> /* wait at least 65536 external clock cycles */
> --
> 2.39.5
>
>
