Hi linux-media people,
I've installed a brand new Hauppauge WinTV-quadHD DVB-T/T2/C PCIe card,
which is being recognised only as a dualHD. I suspect it's a new
revision of the card, as the product number on the label is 178100 LF
Rev. A416, which is different to the number in the photo of the card in
the LinuxTV wiki.
Also, 'lspci -v' output contains no reference to the card, but instead
it is listed by 'lsusb -v' (but only as dualHD).
The machine is running Linux Mint 21.3 Virginia on an Acer MG43M
motherboard (which has been running mythtv for a few years, with
external USB tuners).
I followed the installation instructions for Linux on Hauppauge website
https://www.hauppauge.com/pages/support/support_linux.html
The output of a few display commands is below.
I hope you can help work out how to get all 4 tuners running!
Thanks
david@mythserver:~$ uname -a
Linux mythserver 5.15.0-1122405280420-generic
#2+mediatree+hauppauge-Ubuntu SMP Wed May 29 22:21:00 UTC 2024 x86_64
x86_64 x86_64 GNU/Linux
david@mythserver:~$ sudo lspci -v |grep -i wintv
david@mythserver:~$ sudo lspci -v |grep -i haupp
david@mythserver:~$ sudo lsusb -v |grep -i haupp
Bus 009 Device 003: ID 2040:8265 Hauppauge dualHD
idVendor 0x2040 Hauppauge
david@mythserver:~$
david@mythserver:~$ dmesg |grep -i quad
david@mythserver:~$ dmesg |grep -i dual
[ 2.912753] usb 9-2: Product: dualHD
[ 15.918553] em28xx 9-2:1.0: New device HCW dualHD @ 480 Mbps
(2040:8265, interface 0, class 0)
[ 17.252253] em28xx 9-2:1.0: Identified as Hauppauge WinTV-dualHD DVB
(card=99)
[ 17.254719] em28xx 9-2:1.0: We currently don't support analog TV or
stream capture on dual tuners.
[ 18.608243] em28xx 9-2:1.0: Identified as Hauppauge WinTV-dualHD DVB
(card=99)
[ 19.960477] rc rc1: Hauppauge WinTV-dualHD DVB as
/devices/pci0000:00/0000:00:1c.0/0000:02:00.0/usb9/9-2/9-2:1.0/rc/rc1
[ 19.960682] input: Hauppauge WinTV-dualHD DVB as
/devices/pci0000:00/0000:00:1c.0/0000:02:00.0/usb9/9-2/9-2:1.0/rc/rc1/input16
