Idle the device only after the async sub-device has been successfully
registered. In error handling, set the device's runtime PM status to
suspended only if it has been set to active previously in probe.
Also set the device's runtime PM status to suspended in remove only if it
wasn't so already.
Fixes: 8a89dc62f28c ("media: add imx319 camera sensor driver")
Cc: stable@xxxxxxxxxxxxxxx # for >= v6.12
Signed-off-by: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
---
drivers/media/i2c/imx319.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/media/i2c/imx319.c b/drivers/media/i2c/imx319.c
index dd1b4ff983dc..701840f4a5cc 100644
--- a/drivers/media/i2c/imx319.c
+++ b/drivers/media/i2c/imx319.c
@@ -2442,17 +2442,19 @@ static int imx319_probe(struct i2c_client *client)
if (full_power)
pm_runtime_set_active(&client->dev);
pm_runtime_enable(&client->dev);
- pm_runtime_idle(&client->dev);
ret = v4l2_async_register_subdev_sensor(&imx319->sd);
if (ret < 0)
goto error_media_entity_pm;
+ pm_runtime_idle(&client->dev);
+
return 0;
error_media_entity_pm:
pm_runtime_disable(&client->dev);
- pm_runtime_set_suspended(&client->dev);
+ if (full_power)
+ pm_runtime_set_suspended(&client->dev);
media_entity_cleanup(&imx319->sd.entity);
error_handler_free:
@@ -2474,7 +2476,8 @@ static void imx319_remove(struct i2c_client *client)
v4l2_ctrl_handler_free(sd->ctrl_handler);
pm_runtime_disable(&client->dev);
- pm_runtime_set_suspended(&client->dev);
+ if (!pm_runtime_status_suspended(&client->dev))
+ pm_runtime_set_suspended(&client->dev);
mutex_destroy(&imx319->mutex);
}
--
2.39.5
