Hi,
On 21-Dec-24 3:00 PM, duanek@xxxxxxxxxx wrote:
> Dear All,
>
> I have tested a kernel implementing the latest patches from Hans, but the camera still does not work on my HP Spectre 16" laptop.
I believe you are running a git branch provided by Bryan, right ?
It seems that Bryan's branch is missing the last 2 patches from this set,
otherwise these messages:
[ 4.867524] ov08x40 i2c-OVTI08F4:00: failed to check hwcfg: -517
should not be in your log since patch 10/10 of the v2 series drops that,
but that is otherwise harmless.
I do wonder if your kernel has this commit, which as I mentioned before
likely is also necessary:
https://github.com/jwrdegoede/linux-sunxi/commit/c7803b1a32dab79f8a516e8aa9c08fb4ba74354d
I have also attached 2 further patches which would be good to add
and see if they help.
Regards,
Hans
> The output from dmesg:
> [ 0.000000] Linux version 6.13.0-rc2-ipu6+ (duane@DuanesSpectre16) (gcc (Debian 14.2.0-11) 14.2.0, GNU ld (GNU Binutils for Debian) 2.43.50.20241215) #1 SMP PREEMPT_DYNAMIC Fri Dec 20 20:11:57 CST 2024
> [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.13.0-rc2-ipu6+ root=UUID=7881f7bb-dbe6-4323-887f-dd718adb7a8b ro intel_skl_int3472_discrete.dyndbg
> [ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks
> [ 0.000000] BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
> [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000057818fff] usable
> [ 0.000000] BIOS-e820: [mem 0x0000000057819000-0x000000005ad4dfff] reserved
> [ 0.000000] BIOS-e820: [mem 0x000000005ad4e000-0x000000005ae6dfff] ACPI data
> [ 0.000000] BIOS-e820: [mem 0x000000005ae6e000-0x000000005aff0fff] ACPI NVS
> [ 0.000000] BIOS-e820: [mem 0x000000005aff1000-0x0000000065ffefff] reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000065fff000-0x0000000065ffffff] usable
> [ 0.000000] BIOS-e820: [mem 0x0000000066000000-0x00000000787fffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000087fffffff] usable
> [ 0.000000] NX (Execute Disable) protection: active
> [ 0.000000] APIC: Static calls initialized
> [ 0.000000] e820: update [mem 0x4fe69018-0x4fe78c57] usable ==> usable
> [ 0.000000] extended physical RAM map:
> [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009efff] usable
> [ 0.000000] reserve setup_data: [mem 0x000000000009f000-0x00000000000fffff] reserved
> [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000004fe69017] usable
> [ 0.000000] reserve setup_data: [mem 0x000000004fe69018-0x000000004fe78c57] usable
> [ 0.000000] reserve setup_data: [mem 0x000000004fe78c58-0x0000000057818fff] usable
> [ 0.000000] reserve setup_data: [mem 0x0000000057819000-0x000000005ad4dfff] reserved
> [ 0.000000] reserve setup_data: [mem 0x000000005ad4e000-0x000000005ae6dfff] ACPI data
> [ 0.000000] reserve setup_data: [mem 0x000000005ae6e000-0x000000005aff0fff] ACPI NVS
> [ 0.000000] reserve setup_data: [mem 0x000000005aff1000-0x0000000065ffefff] reserved
> [ 0.000000] reserve setup_data: [mem 0x0000000065fff000-0x0000000065ffffff] usable
> [ 0.000000] reserve setup_data: [mem 0x0000000066000000-0x00000000787fffff] reserved
> [ 0.000000] reserve setup_data: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
> [ 0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
> [ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
> [ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
> [ 0.000000] reserve setup_data: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
> [ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
> [ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
> [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000087fffffff] usable
> [ 0.000000] efi: EFI v2.9 by American Megatrends
> [ 0.000000] efi: ACPI=0x5ae6d000 ACPI 2.0=0x5ae6d014 TPMFinalLog=0x5af09000 SMBIOS=0x64a28000 SMBIOS 3.0=0x64a27000 MEMATTR=0x544a7818 ESRT=0x55b40d18 MOKvar=0x65a8a000 INITRD=0x540b6598 RNG=0x5ad87018 TPMEventLog=0x5ad77018
> [ 0.000000] random: crng init done
> [ 0.000000] efi: Remove mem89: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map
> [ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved
> [ 0.000000] efi: Not removing mem90: MMIO range=[0xfe000000-0xfe010fff] (68KB) from e820 map
> [ 0.000000] efi: Not removing mem91: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map
> [ 0.000000] efi: Not removing mem92: MMIO range=[0xfed00000-0xfed00fff] (4KB) from e820 map
> [ 0.000000] efi: Not removing mem94: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map
> [ 0.000000] efi: Remove mem95: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map
> [ 0.000000] e820: remove [mem 0xff000000-0xffffffff] reserved
> [ 0.000000] SMBIOS 3.6.0 present.
> [ 0.000000] DMI: HP HP Spectre x360 2-in-1 Laptop 16t-aa000/8C17, BIOS F.11 08/14/2024
> [ 0.000000] DMI: Memory slots populated: 2/2
> [ 0.000000] tsc: Detected 3000.000 MHz processor
> [ 0.000000] tsc: Detected 2995.200 MHz TSC
> [ 0.000007] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
> [ 0.000008] e820: remove [mem 0x000a0000-0x000fffff] usable
> [ 0.000014] last_pfn = 0x880000 max_arch_pfn = 0x400000000
> [ 0.000017] MTRR map: 8 entries (3 fixed + 5 variable; max 23), built from 10 variable MTRRs
> [ 0.000018] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
> [ 0.000460] x2apic: enabled by BIOS, switching to x2apic ops
> [ 0.000461] last_pfn = 0x66000 max_arch_pfn = 0x400000000
> [ 0.004895] esrt: Reserving ESRT space from 0x0000000055b40d18 to 0x0000000055b40d50.
> [ 0.004900] e820: update [mem 0x55b40000-0x55b40fff] usable ==> reserved
> [ 0.004913] Using GB pages for direct mapping
> [ 0.005147] Secure boot disabled
> [ 0.005148] RAMDISK: [mem 0x3c30b000-0x412b0fff]
> [ 0.005151] ACPI: Early table checksum verification disabled
> [ 0.005154] ACPI: RSDP 0x000000005AE6D014 000024 (v02 HPQOEM)
> [ 0.005156] ACPI: XSDT 0x000000005AE6C728 000194 (v01 HPQOEM SLIC-MPC 01072009 AMI 01000013)
> [ 0.005160] ACPI: FACP 0x000000005AE53000 000114 (v06 HPQOEM SLIC-MPC 01072009 HP 01000013)
> [ 0.005163] ACPI: DSDT 0x000000005ADDB000 077690 (v02 HPQOEM 8C17 01072009 ACPI 20210930)
> [ 0.005165] ACPI: FACS 0x000000005AFEA000 000040
> [ 0.005166] ACPI: SSDT 0x000000005AE6B000 000689 (v02 HPQOEM 8C17 00003000 ACPI 20210930)
> [ 0.005168] ACPI: SSDT 0x000000005AE6A000 0005E4 (v02 HPQOEM 8C17 00003000 ACPI 20210930)
> [ 0.005169] ACPI: SSDT 0x000000005AE69000 0001AB (v02 HPQOEM 8C17 00003000 ACPI 20210930)
> [ 0.005171] ACPI: SSDT 0x000000005AE68000 000394 (v02 HPQOEM 8C17 00003001 ACPI 20210930)
> [ 0.005172] ACPI: SSDT 0x000000005AE66000 001BAF (v02 HPQOEM 8C17 00003000 ACPI 20210930)
> [ 0.005173] ACPI: SSDT 0x000000005AE64000 001620 (v02 HPQOEM 8C17 00003000 ACPI 20210930)
> [ 0.005175] ACPI: SSDT 0x000000005AE62000 001349 (v02 HPQOEM 8C17 00003000 ACPI 20210930)
> [ 0.005176] ACPI: SSDT 0x000000005AE61000 000FBB (v02 HPQOEM 8C17 00003000 ACPI 20210930)
> [ 0.005178] ACPI: SSDT 0x000000005AE5D000 003BC8 (v02 HPQOEM 8C17 00003000 ACPI 20210930)
> [ 0.005179] ACPI: DTPR 0x000000005AE5C000 000098 (v01 HPQOEM 8C17 00000000 HP 00000000)
> [ 0.005180] ACPI: SSDT 0x000000005AE56000 0058E1 (v02 HPQOEM 8C17 00001000 ACPI 20210930)
> [ 0.005182] ACPI: SSDT 0x000000005AE54000 00165F (v02 HPQOEM 8C17 00001000 ACPI 20210930)
> [ 0.005183] ACPI: FIDT 0x000000005ADDA000 00009C (v01 HPQOEM 8C17 01072009 HP 00010013)
> [ 0.005185] ACPI: MSDM 0x000000005ADD9000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP 00010013)
> [ 0.005186] ACPI: SSDT 0x000000005ADD8000 00038C (v02 HPQOEM 8C17 00000001 ACPI 20210930)
> [ 0.005188] ACPI: SSDT 0x000000005ADD5000 002494 (v02 HPQOEM 8C17 00003000 ACPI 20210930)
> [ 0.005189] ACPI: SSDT 0x000000005ADCA000 0000F9 (v02 HPQOEM 8C17 00001000 ACPI 20210930)
> [ 0.005190] ACPI: HPET 0x000000005ADC9000 000038 (v01 HPQOEM 8C17 01072009 HP 01000013)
> [ 0.005192] ACPI: APIC 0x000000005ADC8000 000358 (v05 HPQOEM 8C17 01072009 HP 01000013)
> [ 0.005193] ACPI: MCFG 0x000000005ADC7000 00003C (v01 HPQOEM 8C17 01072009 HP 01000013)
> [ 0.005195] ACPI: SSDT 0x000000005ADC5000 00147F (v02 HPQOEM 8C17 00001000 ACPI 20210930)
> [ 0.005196] ACPI: SSDT 0x000000005ADC3000 00140F (v02 HPQOEM 8C17 00001000 ACPI 20210930)
> [ 0.005197] ACPI: SSDT 0x000000005ADB2000 01023F (v02 HPQOEM 8C17 00001000 ACPI 20210930)
> [ 0.005199] ACPI: UEFI 0x000000005AEF0000 000048 (v01 HPQOEM 8C17 01072009 HP 01000013)
> [ 0.005200] ACPI: NHLT 0x000000005ADB1000 000960 (v00 HPQOEM 8C17 01072009 HP 01000013)
> [ 0.005202] ACPI: LPIT 0x000000005ADB0000 0000CC (v01 HPQOEM 8C17 01072009 HP 01000013)
> [ 0.005203] ACPI: SSDT 0x000000005ADAE000 000CA6 (v02 HPQOEM 8C17 00001000 ACPI 20210930)
> [ 0.005204] ACPI: SSDT 0x000000005ADA8000 005E42 (v02 HPQOEM 8C17 00000000 ACPI 20210930)
> [ 0.005206] ACPI: DBGP 0x000000005ADA7000 000034 (v01 HPQOEM 8C17 01072009 HP 01000013)
> [ 0.005207] ACPI: DBG2 0x000000005ADA6000 000054 (v00 HPQOEM 8C17 01072009 HP 01000013)
> [ 0.005209] ACPI: SSDT 0x000000005ADA4000 00113F (v02 HPQOEM 8C17 00001000 ACPI 20210930)
> [ 0.005210] ACPI: DMAR 0x000000005ADA3000 0000A8 (v01 HPQOEM 8C17 01072009 HP 01000013)
> [ 0.005211] ACPI: FPDT 0x000000005ADA2000 000044 (v01 HPQOEM 8C17 01072009 HP 01000013)
> [ 0.005213] ACPI: SSDT 0x000000005ADA0000 001021 (v02 HPQOEM 8C17 00000000 ACPI 20210930)
> [ 0.005214] ACPI: SSDT 0x000000005AD9D000 00281A (v02 HPQOEM 8C17 00003000 ACPI 20210930)
> [ 0.005216] ACPI: SSDT 0x000000005AD9A000 0028D3 (v02 HPQOEM 8C17 00003000 ACPI 20210930)
> [ 0.005217] ACPI: SSDT 0x000000005AD99000 000060 (v01 HPQOEM 8C17 00000001 ACPI 20210930)
> [ 0.005219] ACPI: SSDT 0x000000005AD90000 0085C5 (v02 HPQOEM 8C17 00001000 ACPI 20210930)
> [ 0.005220] ACPI: OEM1 0x000000005AD8F000 0002B0 (v01 HPQOEM HPOEM1DC 00000000 HP 00000000)
> [ 0.005221] ACPI: SSDT 0x000000005AD8B000 003210 (v02 HPQOEM 8C17 00001000 ACPI 20210930)
> [ 0.005223] ACPI: PHAT 0x000000005AD8A000 000734 (v01 HPQOEM 8C17 00000005 HP 0100000D)
> [ 0.005224] ACPI: SSDT 0x000000005ADCB000 009BC2 (v02 HPQOEM 8C17 00001000 ACPI 20210930)
> [ 0.005226] ACPI: TPM2 0x000000005AD89000 00004C (v04 HPQOEM 8C17 00000001 HP 00000000)
> [ 0.005227] ACPI: WSMT 0x000000005ADAF000 000028 (v01 HPQOEM 8C17 01072009 HP 00010013)
> [ 0.005229] ACPI: BGRT 0x000000005AD88000 000038 (v01 HPQOEM 8C17 01072009 HP 00010013)
> [ 0.005230] ACPI: Reserving FACP table memory at [mem 0x5ae53000-0x5ae53113]
> [ 0.005231] ACPI: Reserving DSDT table memory at [mem 0x5addb000-0x5ae5268f]
> [ 0.005231] ACPI: Reserving FACS table memory at [mem 0x5afea000-0x5afea03f]
> [ 0.005231] ACPI: Reserving SSDT table memory at [mem 0x5ae6b000-0x5ae6b688]
> [ 0.005232] ACPI: Reserving SSDT table memory at [mem 0x5ae6a000-0x5ae6a5e3]
> [ 0.005232] ACPI: Reserving SSDT table memory at [mem 0x5ae69000-0x5ae691aa]
> [ 0.005233] ACPI: Reserving SSDT table memory at [mem 0x5ae68000-0x5ae68393]
> [ 0.005233] ACPI: Reserving SSDT table memory at [mem 0x5ae66000-0x5ae67bae]
> [ 0.005233] ACPI: Reserving SSDT table memory at [mem 0x5ae64000-0x5ae6561f]
> [ 0.005234] ACPI: Reserving SSDT table memory at [mem 0x5ae62000-0x5ae63348]
> [ 0.005234] ACPI: Reserving SSDT table memory at [mem 0x5ae61000-0x5ae61fba]
> [ 0.005234] ACPI: Reserving SSDT table memory at [mem 0x5ae5d000-0x5ae60bc7]
> [ 0.005235] ACPI: Reserving DTPR table memory at [mem 0x5ae5c000-0x5ae5c097]
> [ 0.005235] ACPI: Reserving SSDT table memory at [mem 0x5ae56000-0x5ae5b8e0]
> [ 0.005236] ACPI: Reserving SSDT table memory at [mem 0x5ae54000-0x5ae5565e]
> [ 0.005236] ACPI: Reserving FIDT table memory at [mem 0x5adda000-0x5adda09b]
> [ 0.005236] ACPI: Reserving MSDM table memory at [mem 0x5add9000-0x5add9054]
> [ 0.005237] ACPI: Reserving SSDT table memory at [mem 0x5add8000-0x5add838b]
> [ 0.005237] ACPI: Reserving SSDT table memory at [mem 0x5add5000-0x5add7493]
> [ 0.005237] ACPI: Reserving SSDT table memory at [mem 0x5adca000-0x5adca0f8]
> [ 0.005238] ACPI: Reserving HPET table memory at [mem 0x5adc9000-0x5adc9037]
> [ 0.005238] ACPI: Reserving APIC table memory at [mem 0x5adc8000-0x5adc8357]
> [ 0.005239] ACPI: Reserving MCFG table memory at [mem 0x5adc7000-0x5adc703b]
> [ 0.005239] ACPI: Reserving SSDT table memory at [mem 0x5adc5000-0x5adc647e]
> [ 0.005239] ACPI: Reserving SSDT table memory at [mem 0x5adc3000-0x5adc440e]
> [ 0.005240] ACPI: Reserving SSDT table memory at [mem 0x5adb2000-0x5adc223e]
> [ 0.005240] ACPI: Reserving UEFI table memory at [mem 0x5aef0000-0x5aef0047]
> [ 0.005240] ACPI: Reserving NHLT table memory at [mem 0x5adb1000-0x5adb195f]
> [ 0.005241] ACPI: Reserving LPIT table memory at [mem 0x5adb0000-0x5adb00cb]
> [ 0.005241] ACPI: Reserving SSDT table memory at [mem 0x5adae000-0x5adaeca5]
> [ 0.005242] ACPI: Reserving SSDT table memory at [mem 0x5ada8000-0x5adade41]
> [ 0.005242] ACPI: Reserving DBGP table memory at [mem 0x5ada7000-0x5ada7033]
> [ 0.005242] ACPI: Reserving DBG2 table memory at [mem 0x5ada6000-0x5ada6053]
> [ 0.005243] ACPI: Reserving SSDT table memory at [mem 0x5ada4000-0x5ada513e]
> [ 0.005243] ACPI: Reserving DMAR table memory at [mem 0x5ada3000-0x5ada30a7]
> [ 0.005243] ACPI: Reserving FPDT table memory at [mem 0x5ada2000-0x5ada2043]
> [ 0.005244] ACPI: Reserving SSDT table memory at [mem 0x5ada0000-0x5ada1020]
> [ 0.005244] ACPI: Reserving SSDT table memory at [mem 0x5ad9d000-0x5ad9f819]
> [ 0.005244] ACPI: Reserving SSDT table memory at [mem 0x5ad9a000-0x5ad9c8d2]
> [ 0.005245] ACPI: Reserving SSDT table memory at [mem 0x5ad99000-0x5ad9905f]
> [ 0.005245] ACPI: Reserving SSDT table memory at [mem 0x5ad90000-0x5ad985c4]
> [ 0.005246] ACPI: Reserving OEM1 table memory at [mem 0x5ad8f000-0x5ad8f2af]
> [ 0.005246] ACPI: Reserving SSDT table memory at [mem 0x5ad8b000-0x5ad8e20f]
> [ 0.005246] ACPI: Reserving PHAT table memory at [mem 0x5ad8a000-0x5ad8a733]
> [ 0.005247] ACPI: Reserving SSDT table memory at [mem 0x5adcb000-0x5add4bc1]
> [ 0.005247] ACPI: Reserving TPM2 table memory at [mem 0x5ad89000-0x5ad8904b]
> [ 0.005248] ACPI: Reserving WSMT table memory at [mem 0x5adaf000-0x5adaf027]
> [ 0.005248] ACPI: Reserving BGRT table memory at [mem 0x5ad88000-0x5ad88037]
> [ 0.005284] APIC: Switched APIC routing to: cluster x2apic
> [ 0.005481] No NUMA configuration found
> [ 0.005481] Faking a node at [mem 0x0000000000000000-0x000000087fffffff]
> [ 0.005485] NODE_DATA(0) allocated [mem 0x87ffd5680-0x87fffffff]
> [ 0.005648] Zone ranges:
> [ 0.005648] DMA [mem 0x0000000000001000-0x0000000000ffffff]
> [ 0.005650] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
> [ 0.005650] Normal [mem 0x0000000100000000-0x000000087fffffff]
> [ 0.005651] Device empty
> [ 0.005652] Movable zone start for each node
> [ 0.005653] Early memory node ranges
> [ 0.005653] node 0: [mem 0x0000000000001000-0x000000000009efff]
> [ 0.005654] node 0: [mem 0x0000000000100000-0x0000000057818fff]
> [ 0.005654] node 0: [mem 0x0000000065fff000-0x0000000065ffffff]
> [ 0.005655] node 0: [mem 0x0000000100000000-0x000000087fffffff]
> [ 0.005657] Initmem setup node 0 [mem 0x0000000000001000-0x000000087fffffff]
> [ 0.005661] On node 0, zone DMA: 1 pages in unavailable ranges
> [ 0.005680] On node 0, zone DMA: 97 pages in unavailable ranges
> [ 0.007499] On node 0, zone DMA32: 26598 pages in unavailable ranges
> [ 0.007724] On node 0, zone Normal: 8192 pages in unavailable ranges
> [ 0.008112] ACPI: PM-Timer IO Port: 0x1808
> [ 0.008119] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1])
> [ 0.008152] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
> [ 0.008154] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [ 0.008155] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> [ 0.008158] ACPI: Using ACPI (MADT) for SMP configuration information
> [ 0.008158] ACPI: HPET id: 0x8086a201 base: 0xfed00000
> [ 0.008165] e820: update [mem 0x5453a000-0x54563fff] usable ==> reserved
> [ 0.008173] TSC deadline timer available
> [ 0.008175] CPU topo: Max. logical packages: 1
> [ 0.008176] CPU topo: Max. logical dies: 1
> [ 0.008176] CPU topo: Max. dies per package: 1
> [ 0.008178] CPU topo: Max. threads per core: 2
> [ 0.008178] CPU topo: Num. cores per package: 16
> [ 0.008179] CPU topo: Num. threads per package: 22
> [ 0.008179] CPU topo: Allowing 22 present CPUs plus 0 hotplug CPUs
> [ 0.008190] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
> [ 0.008191] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
> [ 0.008192] PM: hibernation: Registered nosave memory: [mem 0x4fe69000-0x4fe69fff]
> [ 0.008193] PM: hibernation: Registered nosave memory: [mem 0x4fe78000-0x4fe78fff]
> [ 0.008194] PM: hibernation: Registered nosave memory: [mem 0x5453a000-0x54563fff]
> [ 0.008194] PM: hibernation: Registered nosave memory: [mem 0x55b40000-0x55b40fff]
> [ 0.008195] PM: hibernation: Registered nosave memory: [mem 0x57819000-0x5ad4dfff]
> [ 0.008195] PM: hibernation: Registered nosave memory: [mem 0x5ad4e000-0x5ae6dfff]
> [ 0.008196] PM: hibernation: Registered nosave memory: [mem 0x5ae6e000-0x5aff0fff]
> [ 0.008196] PM: hibernation: Registered nosave memory: [mem 0x5aff1000-0x65ffefff]
> [ 0.008197] PM: hibernation: Registered nosave memory: [mem 0x66000000-0x787fffff]
> [ 0.008197] PM: hibernation: Registered nosave memory: [mem 0x78800000-0xfdffffff]
> [ 0.008198] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
> [ 0.008198] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
> [ 0.008198] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
> [ 0.008199] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
> [ 0.008199] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
> [ 0.008199] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed1ffff]
> [ 0.008200] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff]
> [ 0.008200] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfedfffff]
> [ 0.008200] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
> [ 0.008201] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff]
> [ 0.008202] [mem 0x78800000-0xfdffffff] available for PCI devices
> [ 0.008202] Booting paravirtualized kernel on bare hardware
> [ 0.008204] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
> [ 0.011547] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:22 nr_cpu_ids:22 nr_node_ids:1
> [ 0.012872] percpu: Embedded 66 pages/cpu s233472 r8192 d28672 u524288
> [ 0.012879] pcpu-alloc: s233472 r8192 d28672 u524288 alloc=1*2097152
> [ 0.012881] pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07
> [ 0.012884] pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15
> [ 0.012886] pcpu-alloc: [0] 16 17 18 19 [0] 20 21 -- --
> [ 0.012897] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.13.0-rc2-ipu6+ root=UUID=7881f7bb-dbe6-4323-887f-dd718adb7a8b ro intel_skl_int3472_discrete.dyndbg
> [ 0.012929] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-6.13.0-rc2-ipu6+", will be passed to user space.
> [ 0.012938] printk: log_buf_len individual max cpu contribution: 4096 bytes
> [ 0.012939] printk: log_buf_len total cpu_extra contributions: 86016 bytes
> [ 0.012939] printk: log_buf_len min size: 131072 bytes
> [ 0.013085] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes
> [ 0.013086] printk: early log buf free: 112520(85%)
> [ 0.015676] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
> [ 0.016986] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
> [ 0.017151] Fallback order for Node 0: 0
> [ 0.017156] Built 1 zonelists, mobility grouping on. Total pages: 8222648
> [ 0.017157] Policy zone: Normal
> [ 0.017165] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
> [ 0.017176] software IO TLB: area num 32.
> [ 0.032470] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=22, Nodes=1
> [ 0.032519] ftrace: allocating 45850 entries in 180 pages
> [ 0.043501] ftrace: allocated 180 pages with 4 groups
> [ 0.044061] Dynamic Preempt: voluntary
> [ 0.044127] rcu: Preemptible hierarchical RCU implementation.
> [ 0.044127] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=22.
> [ 0.044128] Trampoline variant of Tasks RCU enabled.
> [ 0.044129] Rude variant of Tasks RCU enabled.
> [ 0.044129] Tracing variant of Tasks RCU enabled.
> [ 0.044129] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
> [ 0.044130] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=22
> [ 0.044140] RCU Tasks: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=22.
> [ 0.044142] RCU Tasks Rude: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=22.
> [ 0.044143] RCU Tasks Trace: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=22.
> [ 0.046613] NR_IRQS: 524544, nr_irqs: 2232, preallocated irqs: 16
> [ 0.046903] rcu: srcu_init: Setting srcu_struct sizes based on contention.
> [ 0.047076] Console: colour dummy device 80x25
> [ 0.047078] printk: legacy console [tty0] enabled
> [ 0.047298] ACPI: Core revision 20240827
> [ 0.047610] hpet: HPET dysfunctional in PC10. Force disabled.
> [ 0.047703] APIC: Switch to symmetric I/O mode setup
> [ 0.047706] DMAR: Host address width 42
> [ 0.047707] DMAR: DRHD base: 0x000000fc800000 flags: 0x0
> [ 0.047714] DMAR: dmar0: reg_base_addr fc800000 ver 7:0 cap c9de008cee690462 ecap 12ca9a00f0ef5e
> [ 0.047717] DMAR: DRHD base: 0x000000fc801000 flags: 0x1
> [ 0.047722] DMAR: dmar1: reg_base_addr fc801000 ver 7:0 cap c9de008cee690462 ecap 12ca9a00f0efde
> [ 0.047725] DMAR: SATC flags: 0x1
> [ 0.047727] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc801000 IOMMU 1
> [ 0.047729] DMAR-IR: HPET id 0 under DRHD base 0xfc801000
> [ 0.047730] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
> [ 0.049332] DMAR-IR: Enabled IRQ remapping in x2apic mode
> [ 0.053292] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2b2c8ec87c7, max_idle_ns: 440795278598 ns
> [ 0.053300] Calibrating delay loop (skipped), value calculated using timer frequency.. 5990.40 BogoMIPS (lpj=11980800)
> [ 0.053357] CPU0: Thermal monitoring enabled (TM1)
> [ 0.053359] x86/cpu: User Mode Instruction Prevention (UMIP) activated
> [ 0.053530] CET detected: Indirect Branch Tracking enabled
> [ 0.053531] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
> [ 0.053533] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
> [ 0.053536] process: using mwait in idle threads
> [ 0.053538] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
> [ 0.053540] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
> [ 0.053542] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
> [ 0.053544] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
> [ 0.053546] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
> [ 0.053555] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
> [ 0.053556] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
> [ 0.053557] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
> [ 0.053559] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
> [ 0.053560] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
> [ 0.053562] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
> [ 0.053563] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8
> [ 0.053564] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16
> [ 0.053566] x86/fpu: Enabled xstate features 0xa07, context size is 856 bytes, using 'compacted' format.
> [ 0.057298] Freeing SMP alternatives memory: 40K
> [ 0.057298] pid_max: default: 32768 minimum: 301
> [ 0.057298] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,tomoyo,bpf,ima,evm
> [ 0.057298] landlock: Up and running.
> [ 0.057298] Yama: becoming mindful.
> [ 0.057298] AppArmor: AppArmor initialized
> [ 0.057298] TOMOYO Linux initialized
> [ 0.057298] LSM support for eBPF active
> [ 0.057298] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
> [ 0.057298] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
> [ 0.057298] smpboot: CPU0: Intel(R) Core(TM) Ultra 7 155H (family: 0x6, model: 0xaa, stepping: 0x4)
> [ 0.057298] Performance Events: XSAVE Architectural LBR, PEBS fmt4+-baseline, AnyThread deprecated, Meteorlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver.
> [ 0.057298] core: cpu_core PMU driver:
> [ 0.057298] ... version: 5
> [ 0.057298] ... bit width: 48
> [ 0.057298] ... generic registers: 8
> [ 0.057298] ... value mask: 0000ffffffffffff
> [ 0.057298] ... max period: 00007fffffffffff
> [ 0.057298] ... fixed-purpose events: 4
> [ 0.057298] ... event mask: 0001000f000000ff
> [ 0.057298] signal: max sigframe size: 3632
> [ 0.057298] Estimated ratio of average max frequency by base frequency (times 1024): 1638
> [ 0.057298] rcu: Hierarchical SRCU implementation.
> [ 0.057298] rcu: Max phase no-delay instances is 1000.
> [ 0.057298] Timer migration: 2 hierarchy levels; 8 children per group; 2 crossnode level
> [ 0.057298] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
> [ 0.057298] smp: Bringing up secondary CPUs ...
> [ 0.057298] smpboot: x86: Booting SMP configuration:
> [ 0.057298] .... node #0, CPUs: #1 #3 #6 #8 #10 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21
> [ 0.010262] core: cpu_atom PMU driver: PEBS-via-PT
> [ 0.010262] ... version: 5
> [ 0.010262] ... bit width: 48
> [ 0.010262] ... generic registers: 8
> [ 0.010262] ... value mask: 0000ffffffffffff
> [ 0.010262] ... max period: 00007fffffffffff
> [ 0.010262] ... fixed-purpose events: 3
> [ 0.010262] ... event mask: 00000007000000ff
> [ 0.069323] #2 #4 #5 #7 #9 #11
> [ 0.111126] smp: Brought up 1 node, 22 CPUs
> [ 0.111126] smpboot: Total of 22 processors activated (131788.80 BogoMIPS)
> [ 0.132406] node 0 deferred pages initialised in 16ms
> [ 0.132408] Memory: 32107260K/32890592K available (16384K kernel code, 2504K rwdata, 6904K rodata, 4148K init, 4924K bss, 762392K reserved, 0K cma-reserved)
> [ 0.134113] devtmpfs: initialized
> [ 0.134113] x86/mm: Memory block size: 128MB
> [ 0.134658] ACPI: PM: Registering ACPI NVS region [mem 0x5ae6e000-0x5aff0fff] (1585152 bytes)
> [ 0.134658] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
> [ 0.134658] futex hash table entries: 8192 (order: 7, 524288 bytes, linear)
> [ 0.134658] pinctrl core: initialized pinctrl subsystem
> [ 0.134658] NET: Registered PF_NETLINK/PF_ROUTE protocol family
> [ 0.134658] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
> [ 0.134694] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
> [ 0.137404] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
> [ 0.137413] audit: initializing netlink subsys (disabled)
> [ 0.137420] audit: type=2000 audit(1734788178.084:1): state=initialized audit_enabled=0 res=1
> [ 0.137428] thermal_sys: Registered thermal governor 'fair_share'
> [ 0.137429] thermal_sys: Registered thermal governor 'bang_bang'
> [ 0.137432] thermal_sys: Registered thermal governor 'step_wise'
> [ 0.137433] thermal_sys: Registered thermal governor 'user_space'
> [ 0.137434] thermal_sys: Registered thermal governor 'power_allocator'
> [ 0.137441] cpuidle: using governor ladder
> [ 0.137441] cpuidle: using governor menu
> [ 0.137441] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
> [ 0.137441] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff]
> [ 0.137441] PCI: Using configuration type 1 for base access
> [ 0.137473] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
> [ 0.137473] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
> [ 0.137473] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
> [ 0.137473] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
> [ 0.137473] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
> [ 0.137473] ACPI: Added _OSI(Module Device)
> [ 0.137473] ACPI: Added _OSI(Processor Device)
> [ 0.137473] ACPI: Added _OSI(3.0 _SCP Extensions)
> [ 0.137473] ACPI: Added _OSI(Processor Aggregator Device)
> [ 0.199203] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.I2C3.PACT], AE_ALREADY_EXISTS (20240827/dswload2-326)
> [ 0.199208] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
> [ 0.199210] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.I2C3.PABN], AE_ALREADY_EXISTS (20240827/dswload2-326)
> [ 0.199213] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
> [ 0.199214] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.I2C3.PAS1], AE_ALREADY_EXISTS (20240827/dswload2-326)
> [ 0.199216] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
> [ 0.199220] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.I2C3.PMP0], AE_ALREADY_EXISTS (20240827/dswload2-326)
> [ 0.199222] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
> [ 0.199231] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.I2C3.PMP1], AE_ALREADY_EXISTS (20240827/dswload2-326)
> [ 0.199234] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
> [ 0.199242] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.I2C3.PA01], AE_ALREADY_EXISTS (20240827/dswload2-326)
> [ 0.199245] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
> [ 0.199246] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x5B82)
> [ 0.199248] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.I2C3.PA02], AE_ALREADY_EXISTS (20240827/dswload2-326)
> [ 0.199250] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
> [ 0.199252] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x5B82)
> [ 0.199254] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.I2C3.PA03], AE_ALREADY_EXISTS (20240827/dswload2-326)
> [ 0.199256] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
> [ 0.199257] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x5B82)
> [ 0.199259] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.I2C3.PA04], AE_ALREADY_EXISTS (20240827/dswload2-326)
> [ 0.199261] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
> [ 0.199262] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x5B82)
> [ 0.199264] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.I2C3.PA05], AE_ALREADY_EXISTS (20240827/dswload2-326)
> [ 0.199266] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
> [ 0.199267] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x5B82)
> [ 0.199269] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.I2C3.PA06], AE_ALREADY_EXISTS (20240827/dswload2-326)
> [ 0.199271] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
> [ 0.199272] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x5B82)
> [ 0.199274] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.I2C3.PA07], AE_ALREADY_EXISTS (20240827/dswload2-326)
> [ 0.199276] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
> [ 0.199277] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x5B82)
> [ 0.199279] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.I2C3.PA08], AE_ALREADY_EXISTS (20240827/dswload2-326)
> [ 0.199281] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
> [ 0.199282] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x5B82)
> [ 0.200077] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.I2C3.TPD0], AE_NOT_FOUND (20240827/dswload2-162)
> [ 0.200079] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20240827/psobject-220)
> [ 0.200081] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0010)
> [ 0.205435] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.TXHC.RHUB.SS01], AE_NOT_FOUND (20240827/dswload2-162)
> [ 0.205438] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20240827/psobject-220)
> [ 0.205440] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0010)
> [ 0.205442] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.TXHC.RHUB.SS02], AE_NOT_FOUND (20240827/dswload2-162)
> [ 0.205444] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20240827/psobject-220)
> [ 0.205446] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0010)
> [ 0.205448] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.TXHC.RHUB.SS03], AE_NOT_FOUND (20240827/dswload2-162)
> [ 0.205450] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20240827/psobject-220)
> [ 0.205452] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0010)
> [ 0.205453] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.TXHC.RHUB.SS04], AE_NOT_FOUND (20240827/dswload2-162)
> [ 0.205456] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20240827/psobject-220)
> [ 0.205457] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0010)
> [ 0.205474] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS01._UPC], AE_ALREADY_EXISTS (20240827/dswload2-326)
> [ 0.205477] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
> [ 0.205478] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
> [ 0.205480] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS01._PLD], AE_ALREADY_EXISTS (20240827/dswload2-326)
> [ 0.205482] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
> [ 0.205484] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
> [ 0.205487] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS02._UPC], AE_ALREADY_EXISTS (20240827/dswload2-326)
> [ 0.205490] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
> [ 0.205491] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
> [ 0.205493] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS02._PLD], AE_ALREADY_EXISTS (20240827/dswload2-326)
> [ 0.205495] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
> [ 0.205496] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
> [ 0.205500] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS03._UPC], AE_ALREADY_EXISTS (20240827/dswload2-326)
> [ 0.205502] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
> [ 0.205504] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
> [ 0.205505] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS03._PLD], AE_ALREADY_EXISTS (20240827/dswload2-326)
> [ 0.205507] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
> [ 0.205509] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
> [ 0.205512] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS04._UPC], AE_ALREADY_EXISTS (20240827/dswload2-326)
> [ 0.205514] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
> [ 0.205516] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
> [ 0.205517] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS04._PLD], AE_ALREADY_EXISTS (20240827/dswload2-326)
> [ 0.205520] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
> [ 0.205521] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
> [ 0.205524] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS05._UPC], AE_ALREADY_EXISTS (20240827/dswload2-326)
> [ 0.205527] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
> [ 0.205528] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
> [ 0.205530] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS05._PLD], AE_ALREADY_EXISTS (20240827/dswload2-326)
> [ 0.205532] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
> [ 0.205533] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
> [ 0.205537] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS06._UPC], AE_ALREADY_EXISTS (20240827/dswload2-326)
> [ 0.205539] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
> [ 0.205540] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
> [ 0.205542] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS06._PLD], AE_ALREADY_EXISTS (20240827/dswload2-326)
> [ 0.205544] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
> [ 0.205546] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
> [ 0.205549] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS07._UPC], AE_ALREADY_EXISTS (20240827/dswload2-326)
> [ 0.205551] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
> [ 0.205552] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
> [ 0.205554] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS07._PLD], AE_ALREADY_EXISTS (20240827/dswload2-326)
> [ 0.205556] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
> [ 0.205558] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
> [ 0.205561] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS08._UPC], AE_ALREADY_EXISTS (20240827/dswload2-326)
> [ 0.205563] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
> [ 0.205564] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
> [ 0.205566] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS08._PLD], AE_ALREADY_EXISTS (20240827/dswload2-326)
> [ 0.205568] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
> [ 0.205570] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
> [ 0.205573] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS09._UPC], AE_ALREADY_EXISTS (20240827/dswload2-326)
> [ 0.205575] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
> [ 0.205577] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
> [ 0.205578] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS09._PLD], AE_ALREADY_EXISTS (20240827/dswload2-326)
> [ 0.205580] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
> [ 0.205582] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
> [ 0.205585] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS10._UPC], AE_ALREADY_EXISTS (20240827/dswload2-326)
> [ 0.205588] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
> [ 0.205589] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
> [ 0.205591] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS10._PLD], AE_ALREADY_EXISTS (20240827/dswload2-326)
> [ 0.205593] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
> [ 0.205594] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
> [ 0.205649] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS01._UPC], AE_ALREADY_EXISTS (20240827/dswload2-326)
> [ 0.205652] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
> [ 0.205653] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
> [ 0.205655] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS01._PLD], AE_ALREADY_EXISTS (20240827/dswload2-326)
> [ 0.205657] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
> [ 0.205659] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
> [ 0.205662] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS02._UPC], AE_ALREADY_EXISTS (20240827/dswload2-326)
> [ 0.205664] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
> [ 0.205666] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
> [ 0.205667] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS02._PLD], AE_ALREADY_EXISTS (20240827/dswload2-326)
> [ 0.205670] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
> [ 0.205671] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
> [ 0.212199] ACPI: 28 ACPI AML tables successfully acquired and loaded
> [ 0.221683] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+
> [ 0.221687] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+
> [ 0.225357] ACPI: EC: EC started
> [ 0.225358] ACPI: EC: interrupt blocked
> [ 0.231464] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
> [ 0.231466] ACPI: \_SB_.PC00.LPCB.EC0_: Boot DSDT EC used to handle transactions
> [ 0.231468] ACPI: Interpreter enabled
> [ 0.231510] ACPI: PM: (supports S0 S3 S4 S5)
> [ 0.231512] ACPI: Using IOAPIC for interrupt routing
> [ 0.231549] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
> [ 0.231550] PCI: Ignoring E820 reservations for host bridge windows
> [ 0.233059] ACPI: Enabled 10 GPEs in block 00 to 7F
> [ 0.233078] ACPI: Enabled 8 GPEs in block 80 to DF
> [ 0.234628] ACPI: \_SB_.PC00.RP01.PXP_: New power resource
> [ 0.237511] ACPI: \_SB_.PC00.RP06.PXP_: New power resource
> [ 0.238390] ACPI: \_SB_.PC00.RP07.PXP_: New power resource
> [ 0.239867] ACPI: \_SB_.PC00.RP09.PXP_: New power resource
> [ 0.240563] ACPI: \_SB_.PC00.RP10.PXP_: New power resource
> [ 0.241371] ACPI: \_SB_.PC00.RP11.PXP_: New power resource
> [ 0.242325] ACPI: \_SB_.PC00.RP12.PXP_: New power resource
> [ 0.244313] ACPI: \_SB_.PC00.XHCI.RHUB.HS10.BTRT: New power resource
> [ 0.244344] ACPI: \_SB_.PC00.XHCI.RHUB.HS10.DBTR: New power resource
> [ 0.244425] ACPI: \_SB_.PC00.PAUD: New power resource
> [ 0.247504] ACPI: \_SB_.PC00.I2C3.PXTC: New power resource
> [ 0.250964] ACPI: \_SB_.PC00.CNVW.WRST: New power resource
> [ 0.260523] ACPI: \_SB_.PC00.TBT0: New power resource
> [ 0.260558] ACPI: \_SB_.PC00.TBT1: New power resource
> [ 0.260589] ACPI: \_SB_.PC00.D3C_: New power resource
> [ 0.271178] ACPI: \PIN_: New power resource
> [ 0.271594] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe])
> [ 0.271598] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
> [ 0.272294] acpi PNP0A08:00: _OSC: platform does not support [AER]
> [ 0.273652] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME PCIeCapability LTR]
> [ 0.274797] PCI host bridge to bus 0000:00
> [ 0.274799] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
> [ 0.274801] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
> [ 0.274802] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
> [ 0.274804] pci_bus 0000:00: root bus resource [mem 0x80000000-0xbfffffff window]
> [ 0.274805] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x3ffbfffffff window]
> [ 0.274807] pci_bus 0000:00: root bus resource [bus 00-fe]
> [ 0.276043] pci 0000:00:00.0: [8086:7d01] type 00 class 0x060000 conventional PCI endpoint
> [ 0.276157] pci 0000:00:02.0: [8086:7d55] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
> [ 0.276168] pci 0000:00:02.0: BAR 0 [mem 0x5220000000-0x5220ffffff 64bit pref]
> [ 0.276177] pci 0000:00:02.0: BAR 2 [mem 0x4210000000-0x421fffffff 64bit pref]
> [ 0.276205] pci 0000:00:02.0: DMAR: Skip IOMMU disabling for graphics
> [ 0.276209] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
> [ 0.276242] pci 0000:00:02.0: PME# supported from D0 D3hot
> [ 0.276259] pci 0000:00:02.0: VF BAR 0 [mem 0x00000000-0x00ffffff 64bit pref]
> [ 0.276261] pci 0000:00:02.0: VF BAR 0 [mem 0x00000000-0x06ffffff 64bit pref]: contains BAR 0 for 7 VFs
> [ 0.276402] pci 0000:00:04.0: [8086:7d03] type 00 class 0x118000 conventional PCI endpoint
> [ 0.276417] pci 0000:00:04.0: BAR 0 [mem 0x52312c0000-0x52312dffff 64bit]
> [ 0.276579] pci 0000:00:05.0: [8086:7d19] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint
> [ 0.276587] pci 0000:00:05.0: BAR 0 [mem 0x5230000000-0x5230ffffff 64bit]
> [ 0.276602] pci 0000:00:05.0: enabling Extended Tags
> [ 0.276696] pci 0000:00:06.0: [8086:7ecb] type 01 class 0x060400 PCIe Root Port
> [ 0.276720] pci 0000:00:06.0: PCI bridge to [bus 01]
> [ 0.276725] pci 0000:00:06.0: bridge window [mem 0x8d200000-0x8d2fffff]
> [ 0.276803] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
> [ 0.276845] pci 0000:00:06.0: PTM enabled (root), 4ns granularity
> [ 0.277288] pci 0000:00:07.0: [8086:7ec4] type 01 class 0x060400 PCIe Root Port
> [ 0.277318] pci 0000:00:07.0: PCI bridge to [bus 02-2b]
> [ 0.277323] pci 0000:00:07.0: bridge window [mem 0x86000000-0x8bffffff]
> [ 0.277332] pci 0000:00:07.0: bridge window [mem 0x4a20000000-0x521fffffff 64bit pref]
> [ 0.277422] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
> [ 0.277453] pci 0000:00:07.0: PTM enabled (root), 4ns granularity
> [ 0.277926] pci 0000:00:07.2: [8086:7ec6] type 01 class 0x060400 PCIe Root Port
> [ 0.277951] pci 0000:00:07.2: PCI bridge to [bus 2c-55]
> [ 0.277956] pci 0000:00:07.2: bridge window [mem 0x80000000-0x85ffffff]
> [ 0.277965] pci 0000:00:07.2: bridge window [mem 0x4220000000-0x4a1fffffff 64bit pref]
> [ 0.278052] pci 0000:00:07.2: PME# supported from D0 D3hot D3cold
> [ 0.278082] pci 0000:00:07.2: PTM enabled (root), 4ns granularity
> [ 0.278543] pci 0000:00:08.0: [8086:7e4c] type 00 class 0x088000 conventional PCI endpoint
> [ 0.278556] pci 0000:00:08.0: BAR 0 [mem 0x5231327000-0x5231327fff 64bit]
> [ 0.278649] pci 0000:00:0a.0: [8086:7d0d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint
> [ 0.278657] pci 0000:00:0a.0: BAR 0 [mem 0x5231280000-0x52312bffff 64bit]
> [ 0.278672] pci 0000:00:0a.0: enabling Extended Tags
> [ 0.278732] pci 0000:00:0b.0: [8086:7d1d] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint
> [ 0.278741] pci 0000:00:0b.0: BAR 0 [mem 0x5228000000-0x522fffffff 64bit]
> [ 0.278753] pci 0000:00:0b.0: BAR 4 [mem 0x5231326000-0x5231326fff 64bit]
> [ 0.278856] pci 0000:00:0d.0: [8086:7ec0] type 00 class 0x0c0330 conventional PCI endpoint
> [ 0.278870] pci 0000:00:0d.0: BAR 0 [mem 0x5231300000-0x523130ffff 64bit]
> [ 0.278927] pci 0000:00:0d.0: PME# supported from D3hot D3cold
> [ 0.279175] pci 0000:00:0d.2: [8086:7ec2] type 00 class 0x0c0340 conventional PCI endpoint
> [ 0.279188] pci 0000:00:0d.2: BAR 0 [mem 0x5231240000-0x523127ffff 64bit]
> [ 0.279198] pci 0000:00:0d.2: BAR 2 [mem 0x5231325000-0x5231325fff 64bit]
> [ 0.279238] pci 0000:00:0d.2: supports D1 D2
> [ 0.279239] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.279298] pci 0000:00:0d.3: [8086:7ec3] type 00 class 0x0c0340 conventional PCI endpoint
> [ 0.279311] pci 0000:00:0d.3: BAR 0 [mem 0x5231200000-0x523123ffff 64bit]
> [ 0.279321] pci 0000:00:0d.3: BAR 2 [mem 0x5231324000-0x5231324fff 64bit]
> [ 0.279361] pci 0000:00:0d.3: supports D1 D2
> [ 0.279362] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.279444] pci 0000:00:12.0: [8086:7e45] type 00 class 0x070000 conventional PCI endpoint
> [ 0.279457] pci 0000:00:12.0: BAR 0 [mem 0x52312f0000-0x52312fffff 64bit]
> [ 0.279505] pci 0000:00:12.0: PME# supported from D0 D3hot
> [ 0.279928] pci 0000:00:14.0: [8086:7e7d] type 00 class 0x0c0330 conventional PCI endpoint
> [ 0.279942] pci 0000:00:14.0: BAR 0 [mem 0x52312e0000-0x52312effff 64bit]
> [ 0.279997] pci 0000:00:14.0: PME# supported from D3hot D3cold
> [ 0.280237] pci 0000:00:14.2: [8086:7e7f] type 00 class 0x050000 conventional PCI endpoint
> [ 0.280253] pci 0000:00:14.2: BAR 0 [mem 0x5231318000-0x523131bfff 64bit]
> [ 0.280264] pci 0000:00:14.2: BAR 2 [mem 0x5231323000-0x5231323fff 64bit]
> [ 0.280358] pci 0000:00:14.3: [8086:7e40] type 00 class 0x028000 PCIe Root Complex Integrated Endpoint
> [ 0.280369] pci 0000:00:14.3: BAR 0 [mem 0x5231314000-0x5231317fff 64bit]
> [ 0.280423] pci 0000:00:14.3: PME# supported from D0 D3hot D3cold
> [ 0.280596] pci 0000:00:15.0: [8086:7e78] type 00 class 0x0c8000 conventional PCI endpoint
> [ 0.280625] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit]
> [ 0.280865] pci 0000:00:15.1: [8086:7e79] type 00 class 0x0c8000 conventional PCI endpoint
> [ 0.280886] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit]
> [ 0.281166] pci 0000:00:15.3: [8086:7e7b] type 00 class 0x0c8000 conventional PCI endpoint
> [ 0.281187] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit]
> [ 0.281263] pci 0000:00:16.0: [8086:7e70] type 00 class 0x078000 conventional PCI endpoint
> [ 0.281263] pci 0000:00:16.0: BAR 0 [mem 0x523131f000-0x523131ffff 64bit]
> [ 0.281263] pci 0000:00:16.0: PME# supported from D3hot
> [ 0.281263] pci 0000:00:19.0: [8086:7e50] type 00 class 0x0c8000 conventional PCI endpoint
> [ 0.281263] pci 0000:00:19.0: BAR 0 [mem 0x00000000-0x00000fff 64bit]
> [ 0.281263] pci 0000:00:19.1: [8086:7e51] type 00 class 0x0c8000 conventional PCI endpoint
> [ 0.281263] pci 0000:00:19.1: BAR 0 [mem 0x00000000-0x00000fff 64bit]
> [ 0.281263] pci 0000:00:1c.0: [8086:7e38] type 01 class 0x060400 PCIe Root Port
> [ 0.281263] pci 0000:00:1c.0: PCI bridge to [bus 56]
> [ 0.281263] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
> [ 0.281263] pci 0000:00:1c.0: bridge window [mem 0x8c000000-0x8d0fffff]
> [ 0.281263] pci 0000:00:1c.0: bridge window [mem 0x4000000000-0x4201ffffff 64bit pref]
> [ 0.281263] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
> [ 0.281263] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity
> [ 0.281263] pci 0000:00:1f.0: [8086:7e02] type 00 class 0x060100 conventional PCI endpoint
> [ 0.281263] pci 0000:00:1f.3: [8086:7e28] type 00 class 0x040100 conventional PCI endpoint
> [ 0.281263] pci 0000:00:1f.3: BAR 0 [mem 0x5231310000-0x5231313fff 64bit]
> [ 0.281263] pci 0000:00:1f.3: BAR 4 [mem 0x5231000000-0x52311fffff 64bit]
> [ 0.281263] pci 0000:00:1f.3: PME# supported from D3hot D3cold
> [ 0.281263] pci 0000:00:1f.4: [8086:7e22] type 00 class 0x0c0500 conventional PCI endpoint
> [ 0.281263] pci 0000:00:1f.4: BAR 0 [mem 0x523131c000-0x523131c0ff 64bit]
> [ 0.281263] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf]
> [ 0.281263] pci 0000:00:1f.5: [8086:7e23] type 00 class 0x0c8000 conventional PCI endpoint
> [ 0.281263] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]
> [ 0.281410] pci 0000:01:00.0: [1c5c:1959] type 00 class 0x010802 PCIe Endpoint
> [ 0.281431] pci 0000:01:00.0: BAR 0 [mem 0x8d200000-0x8d203fff 64bit]
> [ 0.281732] pci 0000:00:06.0: PCI bridge to [bus 01]
> [ 0.281783] pci 0000:00:07.0: PCI bridge to [bus 02-2b]
> [ 0.281836] pci 0000:00:07.2: PCI bridge to [bus 2c-55]
> [ 0.281893] pci 0000:56:00.0: [10de:28a1] type 00 class 0x030000 PCIe Legacy Endpoint
> [ 0.281907] pci 0000:56:00.0: BAR 0 [mem 0x8c000000-0x8cffffff]
> [ 0.281918] pci 0000:56:00.0: BAR 1 [mem 0x4000000000-0x41ffffffff 64bit pref]
> [ 0.281930] pci 0000:56:00.0: BAR 3 [mem 0x4200000000-0x4201ffffff 64bit pref]
> [ 0.281938] pci 0000:56:00.0: BAR 5 [io 0x3000-0x307f]
> [ 0.281945] pci 0000:56:00.0: ROM [mem 0x8d000000-0x8d07ffff pref]
> [ 0.282009] pci 0000:56:00.0: PME# supported from D0 D3hot
> [ 0.282089] pci 0000:56:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16.0 GT/s PCIe x4 link at 0000:00:1c.0 (capable of 126.024 Gb/s with 16.0 GT/s PCIe x8 link)
> [ 0.282286] pci 0000:56:00.1: [10de:22be] type 00 class 0x040300 PCIe Endpoint
> [ 0.282299] pci 0000:56:00.1: BAR 0 [mem 0x8d080000-0x8d083fff]
> [ 0.282437] pci 0000:00:1c.0: PCI bridge to [bus 56]
> [ 0.286888] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
> [ 0.287025] ACPI: PCI: Interrupt link LNKB configured for IRQ 1
> [ 0.287158] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
> [ 0.287290] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
> [ 0.287421] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
> [ 0.287553] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
> [ 0.287685] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
> [ 0.287817] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
> [ 0.288757] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1)
> [ 0.424924] Low-power S0 idle used by default for system suspend
> [ 0.434731] ACPI: EC: interrupt unblocked
> [ 0.434735] ACPI: EC: event unblocked
> [ 0.434756] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
> [ 0.434758] ACPI: EC: GPE=0x6e
> [ 0.434760] ACPI: \_SB_.PC00.LPCB.EC0_: Boot DSDT EC initialization complete
> [ 0.434763] ACPI: \_SB_.PC00.LPCB.EC0_: EC: Used to handle transactions and events
> [ 0.437315] iommu: Default domain type: Translated
> [ 0.437315] iommu: DMA domain TLB invalidation policy: lazy mode
> [ 0.437418] pps_core: LinuxPPS API ver. 1 registered
> [ 0.437421] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx>
> [ 0.437425] PTP clock support registered
> [ 0.437437] EDAC MC: Ver: 3.0.0
> [ 0.437656] efivars: Registered efivars operations
> [ 0.437656] NetLabel: Initializing
> [ 0.437656] NetLabel: domain hash size = 128
> [ 0.437656] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
> [ 0.437656] NetLabel: unlabeled traffic allowed by default
> [ 0.437656] PCI: Using ACPI for IRQ routing
> [ 0.446810] PCI: pci_cache_line_size set to 64 bytes
> [ 0.446956] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window
> [ 0.447078] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
> [ 0.447079] e820: reserve RAM buffer [mem 0x4fe69018-0x4fffffff]
> [ 0.447080] e820: reserve RAM buffer [mem 0x5453a000-0x57ffffff]
> [ 0.447081] e820: reserve RAM buffer [mem 0x55b40000-0x57ffffff]
> [ 0.447082] e820: reserve RAM buffer [mem 0x57819000-0x57ffffff]
> [ 0.447083] e820: reserve RAM buffer [mem 0x66000000-0x67ffffff]
> [ 0.449354] pci 0000:00:02.0: vgaarb: setting as boot VGA device
> [ 0.449354] pci 0000:00:02.0: vgaarb: bridge control possible
> [ 0.449354] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
> [ 0.449354] pci 0000:56:00.0: vgaarb: bridge control possible
> [ 0.449354] pci 0000:56:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
> [ 0.449354] vgaarb: loaded
> [ 0.449385] clocksource: Switched to clocksource tsc-early
> [ 0.449530] VFS: Disk quotas dquot_6.6.0
> [ 0.449540] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> [ 0.449666] AppArmor: AppArmor Filesystem Enabled
> [ 0.449680] pnp: PnP ACPI init
> [ 0.449871] system 00:00: [io 0x0680-0x069f] has been reserved
> [ 0.449875] system 00:00: [io 0x164e-0x164f] has been reserved
> [ 0.450013] system 00:01: [io 0x1854-0x1857] has been reserved
> [ 0.450727] pnp 00:03: disabling [mem 0x00000000-0x00000fff] because it overlaps 0000:00:02.0 BAR 7 [mem 0x00000000-0x06ffffff 64bit pref]
> [ 0.450733] pnp 00:03: disabling [mem 0x00000000-0x00000fff] because it overlaps 0000:00:02.0 BAR 7 [mem 0x00000000-0x06ffffff 64bit pref]
> [ 0.450760] system 00:03: [mem 0xfedc0000-0xfedc7fff] has been reserved
> [ 0.450763] system 00:03: [mem 0xc0000000-0xcfffffff] has been reserved
> [ 0.450766] system 00:03: [mem 0xfed20000-0xfed7ffff] could not be reserved
> [ 0.450769] system 00:03: [mem 0xfc800000-0xfc81ffff] could not be reserved
> [ 0.450771] system 00:03: [mem 0xfed45000-0xfed8ffff] could not be reserved
> [ 0.450774] system 00:03: [mem 0xfee00000-0xfeefffff] could not be reserved
> [ 0.452253] system 00:04: [io 0x2000-0x20fe] has been reserved
> [ 0.452565] system 00:05: [mem 0xfe02c008-0xfe02cfff] has been reserved
> [ 0.452569] system 00:05: [mem 0xfe02d000-0xfe02dfff] has been reserved
> [ 0.453981] pnp: PnP ACPI: found 6 devices
> [ 0.459608] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
> [ 0.459679] NET: Registered PF_INET protocol family
> [ 0.459907] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
> [ 0.463017] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
> [ 0.463064] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
> [ 0.463281] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
> [ 0.463691] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
> [ 0.463802] TCP: Hash tables configured (established 262144 bind 65536)
> [ 0.463987] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear)
> [ 0.464140] UDP hash table entries: 16384 (order: 8, 1048576 bytes, linear)
> [ 0.464314] UDP-Lite hash table entries: 16384 (order: 8, 1048576 bytes, linear)
> [ 0.464429] NET: Registered PF_UNIX/PF_LOCAL protocol family
> [ 0.464438] NET: Registered PF_XDP protocol family
> [ 0.464444] pci_bus 0000:00: max bus depth: 1 pci_try_num: 2
> [ 0.464456] pci 0000:00:02.0: VF BAR 0 [mem 0x4202000000-0x4208ffffff 64bit pref]: assigned
> [ 0.464463] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]: assigned
> [ 0.464466] pci 0000:00:07.2: bridge window [io 0x5000-0x5fff]: assigned
> [ 0.464470] pci 0000:00:15.0: BAR 0 [mem 0x4209000000-0x4209000fff 64bit]: assigned
> [ 0.464510] pci 0000:00:15.1: BAR 0 [mem 0x4209001000-0x4209001fff 64bit]: assigned
> [ 0.464556] pci 0000:00:15.3: BAR 0 [mem 0x4209002000-0x4209002fff 64bit]: assigned
> [ 0.464603] pci 0000:00:19.0: BAR 0 [mem 0x4209003000-0x4209003fff 64bit]: assigned
> [ 0.464650] pci 0000:00:19.1: BAR 0 [mem 0x4209004000-0x4209004fff 64bit]: assigned
> [ 0.464697] pci 0000:00:1f.5: BAR 0 [mem 0x8d100000-0x8d100fff]: assigned
> [ 0.464709] pci 0000:00:06.0: PCI bridge to [bus 01]
> [ 0.464716] pci 0000:00:06.0: bridge window [mem 0x8d200000-0x8d2fffff]
> [ 0.464723] pci 0000:00:07.0: PCI bridge to [bus 02-2b]
> [ 0.464730] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]
> [ 0.464735] pci 0000:00:07.0: bridge window [mem 0x86000000-0x8bffffff]
> [ 0.464739] pci 0000:00:07.0: bridge window [mem 0x4a20000000-0x521fffffff 64bit pref]
> [ 0.464745] pci 0000:00:07.2: PCI bridge to [bus 2c-55]
> [ 0.464748] pci 0000:00:07.2: bridge window [io 0x5000-0x5fff]
> [ 0.464752] pci 0000:00:07.2: bridge window [mem 0x80000000-0x85ffffff]
> [ 0.464756] pci 0000:00:07.2: bridge window [mem 0x4220000000-0x4a1fffffff 64bit pref]
> [ 0.464764] pci 0000:00:1c.0: PCI bridge to [bus 56]
> [ 0.464766] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
> [ 0.464770] pci 0000:00:1c.0: bridge window [mem 0x8c000000-0x8d0fffff]
> [ 0.464774] pci 0000:00:1c.0: bridge window [mem 0x4000000000-0x4201ffffff 64bit pref]
> [ 0.464780] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
> [ 0.464782] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
> [ 0.464784] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
> [ 0.464787] pci_bus 0000:00: resource 7 [mem 0x80000000-0xbfffffff window]
> [ 0.464789] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x3ffbfffffff window]
> [ 0.464792] pci_bus 0000:01: resource 1 [mem 0x8d200000-0x8d2fffff]
> [ 0.464794] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
> [ 0.464796] pci_bus 0000:02: resource 1 [mem 0x86000000-0x8bffffff]
> [ 0.464798] pci_bus 0000:02: resource 2 [mem 0x4a20000000-0x521fffffff 64bit pref]
> [ 0.464801] pci_bus 0000:2c: resource 0 [io 0x5000-0x5fff]
> [ 0.464803] pci_bus 0000:2c: resource 1 [mem 0x80000000-0x85ffffff]
> [ 0.464805] pci_bus 0000:2c: resource 2 [mem 0x4220000000-0x4a1fffffff 64bit pref]
> [ 0.464808] pci_bus 0000:56: resource 0 [io 0x3000-0x3fff]
> [ 0.464810] pci_bus 0000:56: resource 1 [mem 0x8c000000-0x8d0fffff]
> [ 0.464812] pci_bus 0000:56: resource 2 [mem 0x4000000000-0x4201ffffff 64bit pref]
> [ 0.465378] pci 0000:56:00.1: extending delay after power-on from D3hot to 20 msec
> [ 0.465406] pci 0000:56:00.1: D0 power state depends on 0000:56:00.0
> [ 0.465413] PCI: CLS 64 bytes, default 64
> [ 0.465476] DMAR: Intel-IOMMU force enabled due to platform opt in
> [ 0.465486] DMAR: No RMRR found
> [ 0.465488] DMAR: No ATSR found
> [ 0.465490] DMAR: IOMMU feature sc_support inconsistent
> [ 0.465492] DMAR: dmar0: Using Queued invalidation
> [ 0.465498] DMAR: dmar1: Using Queued invalidation
> [ 0.465522] Trying to unpack rootfs image as initramfs...
> [ 0.465893] pci 0000:00:02.0: Adding to iommu group 0
> [ 0.465931] pci 0000:00:00.0: Adding to iommu group 1
> [ 0.465942] pci 0000:00:04.0: Adding to iommu group 2
> [ 0.465954] pci 0000:00:05.0: Adding to iommu group 3
> [ 0.465988] pci 0000:00:06.0: Adding to iommu group 4
> [ 0.466008] pci 0000:00:07.0: Adding to iommu group 5
> [ 0.466020] pci 0000:00:07.2: Adding to iommu group 6
> [ 0.466031] pci 0000:00:08.0: Adding to iommu group 7
> [ 0.466042] pci 0000:00:0a.0: Adding to iommu group 8
> [ 0.466054] pci 0000:00:0b.0: Adding to iommu group 9
> [ 0.466076] pci 0000:00:0d.0: Adding to iommu group 10
> [ 0.466088] pci 0000:00:0d.2: Adding to iommu group 10
> [ 0.466099] pci 0000:00:0d.3: Adding to iommu group 10
> [ 0.466114] pci 0000:00:12.0: Adding to iommu group 11
> [ 0.466132] pci 0000:00:14.0: Adding to iommu group 12
> [ 0.466143] pci 0000:00:14.2: Adding to iommu group 12
> [ 0.466155] pci 0000:00:14.3: Adding to iommu group 13
> [ 0.466176] pci 0000:00:15.0: Adding to iommu group 14
> [ 0.466189] pci 0000:00:15.1: Adding to iommu group 14
> [ 0.466200] pci 0000:00:15.3: Adding to iommu group 14
> [ 0.466215] pci 0000:00:16.0: Adding to iommu group 15
> [ 0.466236] pci 0000:00:19.0: Adding to iommu group 16
> [ 0.466248] pci 0000:00:19.1: Adding to iommu group 16
> [ 0.466260] pci 0000:00:1c.0: Adding to iommu group 17
> [ 0.466293] pci 0000:00:1f.0: Adding to iommu group 18
> [ 0.466306] pci 0000:00:1f.3: Adding to iommu group 18
> [ 0.466320] pci 0000:00:1f.4: Adding to iommu group 18
> [ 0.466332] pci 0000:00:1f.5: Adding to iommu group 18
> [ 0.466365] pci 0000:01:00.0: Adding to iommu group 19
> [ 0.466387] pci 0000:56:00.0: Adding to iommu group 20
> [ 0.466401] pci 0000:56:00.1: Adding to iommu group 20
> [ 0.466770] DMAR: Intel(R) Virtualization Technology for Directed I/O
> [ 0.466772] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
> [ 0.466774] software IO TLB: mapped [mem 0x00000000480b8000-0x000000004c0b8000] (64MB)
> [ 0.466806] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b2c8ec87c7, max_idle_ns: 440795278598 ns
> [ 0.466843] clocksource: Switched to clocksource tsc
> [ 0.466866] platform rtc_cmos: registered platform RTC device (no PNP device found)
> [ 0.470790] Initialise system trusted keyrings
> [ 0.470802] Key type blacklist registered
> [ 0.470838] workingset: timestamp_bits=36 max_order=23 bucket_order=0
> [ 0.470847] zbud: loaded
> [ 0.470942] fuse: init (API version 7.41)
> [ 0.471067] integrity: Platform Keyring initialized
> [ 0.471072] integrity: Machine keyring initialized
> [ 0.480257] Key type asymmetric registered
> [ 0.480261] Asymmetric key parser 'x509' registered
> [ 0.978371] Freeing initrd memory: 81560K
> [ 0.982966] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
> [ 0.983014] io scheduler mq-deadline registered
> [ 0.984611] ledtrig-cpu: registered to indicate activity on CPUs
> [ 0.985381] pcieport 0000:00:06.0: PME: Signaling with IRQ 122
> [ 0.985825] pcieport 0000:00:07.0: PME: Signaling with IRQ 123
> [ 0.985848] pcieport 0000:00:07.0: pciehp: Slot #12 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
> [ 0.986181] pcieport 0000:00:07.2: PME: Signaling with IRQ 124
> [ 0.986207] pcieport 0000:00:07.2: pciehp: Slot #14 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
> [ 0.986513] pcieport 0000:00:1c.0: PME: Signaling with IRQ 125
> [ 0.986615] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> [ 0.999001] ACPI: thermal: [Firmware Bug]: Invalid critical threshold (-274000)
> [ 1.001527] thermal LNXTHERM:00: registered as thermal_zone0
> [ 1.001530] ACPI: thermal: Thermal Zone [TZ01] (48 C)
> [ 1.001681] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> [ 1.001991] serial 0000:00:12.0: enabling device (0000 -> 0002)
> [ 1.002317] hpet_acpi_add: no address or irqs in _CRS
> [ 1.002338] Linux agpgart interface v0.103
> [ 1.004212] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1D, rev-id 54)
> [ 1.119372] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
> [ 1.119379] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
> [ 1.120514] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 1.120757] mousedev: PS/2 mouse device common for all mice
> [ 1.120774] rtc_cmos rtc_cmos: RTC can wake from S4
> [ 1.121549] rtc_cmos rtc_cmos: registered as rtc0
> [ 1.121679] rtc_cmos rtc_cmos: setting system clock to 2024-12-21T13:36:19 UTC (1734788179)
> [ 1.121703] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
> [ 1.123610] intel_pstate: Intel P-state driver initializing
> [ 1.128486] intel_pstate: HWP enabled
> [ 1.128587] efifb: probing for efifb
> [ 1.128593] efifb: framebuffer at 0x70800000, using 20252k, total 20250k
> [ 1.128595] efifb: mode is 2880x1800x32, linelength=11520, pages=1
> [ 1.128596] efifb: scrolling: redraw
> [ 1.128597] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
> [ 1.130176] Console: switching to colour frame buffer device 180x56
> [ 1.131717] fb0: EFI VGA frame buffer device
> [ 1.131839] NET: Registered PF_INET6 protocol family
> [ 1.135406] Segment Routing with IPv6
> [ 1.135418] In-situ OAM (IOAM) with IPv6
> [ 1.135438] mip6: Mobile IPv6
> [ 1.135446] NET: Registered PF_PACKET protocol family
> [ 1.135479] mpls_gso: MPLS GSO support
> [ 1.137987] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
> [ 1.138899] microcode: Current revision: 0x00000020
> [ 1.138919] microcode: Updated early from: 0x0000001f
> [ 1.141105] IPI shorthand broadcast: enabled
> [ 1.142123] sched_clock: Marking stable (1134930021, 6262491)->(1187055438, -45862926)
> [ 1.142707] registered taskstats version 1
> [ 1.142818] Loading compiled-in X.509 certificates
> [ 1.159181] Loaded X.509 cert 'Build time autogenerated kernel key: 24a2ef881874b1f607ad746af78b458b87f50423'
> [ 1.160425] Demotion targets for Node 0: null
> [ 1.160960] Key type .fscrypt registered
> [ 1.160975] Key type fscrypt-provisioning registered
> [ 1.173904] Key type encrypted registered
> [ 1.173924] AppArmor: AppArmor sha256 policy hashing enabled
> [ 1.174231] integrity: Loading X.509 certificate: UEFI:db
> [ 1.174325] integrity: Loaded X.509 cert 'HP Inc.: HP UEFI Secure Boot DB 2017: d9c01b50cfcae89d3b05345c163aa76e5dd589e7'
> [ 1.174361] integrity: Loading X.509 certificate: UEFI:db
> [ 1.174390] integrity: Loaded X.509 cert 'Microsoft UEFI CA 2023: 81aa6b3244c935bce0d6628af39827421e32497d'
> [ 1.174414] integrity: Loading X.509 certificate: UEFI:db
> [ 1.174437] integrity: Loaded X.509 cert 'Microsoft Corporation: Windows UEFI CA 2023: aefc5fbbbe055d8f8daa585473499417ab5a5272'
> [ 1.174465] integrity: Loading X.509 certificate: UEFI:db
> [ 1.174488] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
> [ 1.174515] integrity: Loading X.509 certificate: UEFI:db
> [ 1.174538] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
> [ 1.175943] ima: Allocated hash algorithm: sha256
> [ 1.185193] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
> [ 1.333356] ima: No architecture policies found
> [ 1.334098] evm: Initialising EVM extended attributes:
> [ 1.334818] evm: security.selinux
> [ 1.335532] evm: security.SMACK64 (disabled)
> [ 1.336243] evm: security.SMACK64EXEC (disabled)
> [ 1.336948] evm: security.SMACK64TRANSMUTE (disabled)
> [ 1.337648] evm: security.SMACK64MMAP (disabled)
> [ 1.338343] evm: security.apparmor
> [ 1.339024] evm: security.ima
> [ 1.339694] evm: security.capability
> [ 1.340359] evm: HMAC attrs: 0x1
> [ 1.343230] RAS: Correctable Errors collector initialized.
> [ 1.344161] clk: Disabling unused clocks
> [ 1.345062] PM: genpd: Disabling unused power domains
> [ 1.348608] Freeing unused decrypted memory: 2028K
> [ 1.350229] Freeing unused kernel image (initmem) memory: 4148K
> [ 1.351139] Write protecting the kernel read-only data: 24576k
> [ 1.353045] Freeing unused kernel image (rodata/data gap) memory: 1288K
> [ 1.358616] x86/mm: Checked W+X mappings: passed, no W+X pages found.
> [ 1.359144] Run /init as init process
> [ 1.359666] with arguments:
> [ 1.359667] /init
> [ 1.359667] with environment:
> [ 1.359668] HOME=/
> [ 1.359668] TERM=linux
> [ 1.359669] BOOT_IMAGE=/boot/vmlinuz-6.13.0-rc2-ipu6+
> [ 1.419828] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
> [ 1.420416] ACPI: button: Sleep Button [SLPB]
> [ 1.420984] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
> [ 1.421747] ACPI: button: Lid Switch [LID0]
> [ 1.422471] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
> [ 1.425618] wmi_bus wmi_bus-PNP0C14:04: [Firmware Info]: 8F1F6436-9F42-42C8-BADC-0E9424F20C9A has zero instances
> [ 1.427108] wmi_bus wmi_bus-PNP0C14:04: [Firmware Info]: 8F1F6435-9F42-42C8-BADC-0E9424F20C9A has zero instances
> [ 1.428538] wmi_bus wmi_bus-PNP0C14:04: [Firmware Info]: 7391A661-223A-47DB-A77A-7BE84C60822D has zero instances
> [ 1.430142] wmi_bus wmi_bus-PNP0C14:04: [Firmware Info]: DF4E63B6-3BBC-4858-9737-C74F82F821F3 has zero instances
> [ 1.437496] ACPI: bus type thunderbolt registered
> [ 1.437836] i801_smbus 0000:00:1f.4: SPD Write Disable is set
> [ 1.439247] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
> [ 1.445211] ACPI: bus type drm_connector registered
> [ 1.446300] ACPI: button: Power Button [PWRB]
> [ 1.446964] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
> [ 1.447596] ACPI: button: Power Button [PWRF]
> [ 1.457236] ACPI: battery: Slot [BAT0] (battery present)
> [ 1.644400] i801_smbus 0000:00:1f.4: SMBus is busy, can't use it!
> [ 1.649761] nvme 0000:01:00.0: platform quirk: setting simple suspend
> [ 1.651831] nvme nvme0: pci function 0000:01:00.0
> [ 1.653747] hid: raw HID events driver (C) Jiri Kosina
> [ 1.657629] ACPI: bus type USB registered
> [ 1.658244] usbcore: registered new interface driver usbfs
> [ 1.659056] usbcore: registered new interface driver hub
> [ 1.659592] usbcore: registered new device driver usb
> [ 1.665836] intel-lpss 0000:00:15.0: enabling device (0004 -> 0006)
> [ 1.667641] idma64 idma64.0: Found Intel integrated DMA 64-bit
> [ 1.672238] nvme nvme0: 22/0/0 default/read/poll queues
> [ 1.679491] nvme0n1: p1 p2 p3 p4 p5 p6 p7
> [ 1.685031] intel-lpss 0000:00:15.1: enabling device (0004 -> 0006)
> [ 1.686425] idma64 idma64.1: Found Intel integrated DMA 64-bit
> [ 1.705757] intel-lpss 0000:00:15.3: enabling device (0004 -> 0006)
> [ 1.706418] idma64 idma64.2: Found Intel integrated DMA 64-bit
> [ 1.722281] intel-lpss 0000:00:19.0: enabling device (0004 -> 0006)
> [ 1.740753] intel-lpss 0000:00:19.1: enabling device (0004 -> 0006)
> [ 1.803979] i2c_hid_acpi i2c-ELAN2513:00: i2c_hid_get_input: IRQ triggered but there's no data
> [ 1.805460] xhci_hcd 0000:00:0d.0: xHCI Host Controller
> [ 1.806846] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1
> [ 1.808295] input: ELAN07CE:00 04F3:32C8 Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN07CE:00/0018:04F3:32C8.0001/input/input5
> [ 1.808807] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
> [ 1.809481] input: ELAN07CE:00 04F3:32C8 Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN07CE:00/0018:04F3:32C8.0001/input/input7
> [ 1.810194] xhci_hcd 0000:00:0d.0: xHCI Host Controller
> [ 1.810780] input: ELAN07CE:00 04F3:32C8 Consumer Control as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN07CE:00/0018:04F3:32C8.0001/input/input8
> [ 1.811443] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2
> [ 1.812327] hid-generic 0018:04F3:32C8.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN07CE:00 04F3:32C8] on i2c-ELAN07CE:00
> [ 1.812878] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed
> [ 1.814217] input: ELAN2513:00 04F3:422C Touchscreen as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-ELAN2513:00/0018:04F3:422C.0002/input/input9
> [ 1.814561] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.13
> [ 1.815529] input: ELAN2513:00 04F3:422C as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-ELAN2513:00/0018:04F3:422C.0002/input/input10
> [ 1.816278] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 1.817194] input: ELAN2513:00 04F3:422C as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-ELAN2513:00/0018:04F3:422C.0002/input/input11
> [ 1.818110] usb usb1: Product: xHCI Host Controller
> [ 1.819077] input: ELAN2513:00 04F3:422C Stylus as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-ELAN2513:00/0018:04F3:422C.0002/input/input12
> [ 1.819912] usb usb1: Manufacturer: Linux 6.13.0-rc2-ipu6+ xhci-hcd
> [ 1.820687] input: ELAN2513:00 04F3:422C Keyboard as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-ELAN2513:00/0018:04F3:422C.0002/input/input13
> [ 1.821577] usb usb1: SerialNumber: 0000:00:0d.0
> [ 1.822670] input: ELAN2513:00 04F3:422C Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-ELAN2513:00/0018:04F3:422C.0002/input/input14
> [ 1.823478] hub 1-0:1.0: USB hub found
> [ 1.824310] input: ELAN2513:00 04F3:422C as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-ELAN2513:00/0018:04F3:422C.0002/input/input16
> [ 1.825425] hub 1-0:1.0: 1 port detected
> [ 1.826434] input: ELAN2513:00 04F3:422C as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-ELAN2513:00/0018:04F3:422C.0002/input/input17
> [ 1.827696] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.13
> [ 1.828694] input: ELAN2513:00 04F3:422C as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-ELAN2513:00/0018:04F3:422C.0002/input/input18
> [ 1.829825] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 1.832189] usb usb2: Product: xHCI Host Controller
> [ 1.833365] usb usb2: Manufacturer: Linux 6.13.0-rc2-ipu6+ xhci-hcd
> [ 1.834355] usb usb2: SerialNumber: 0000:00:0d.0
> [ 1.835585] hub 2-0:1.0: USB hub found
> [ 1.836439] hub 2-0:1.0: 4 ports detected
> [ 1.838247] xhci_hcd 0000:00:14.0: xHCI Host Controller
> [ 1.839451] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
> [ 1.841313] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
> [ 1.842335] xhci_hcd 0000:00:14.0: xHCI Host Controller
> [ 1.843202] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
> [ 1.844024] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed
> [ 1.844866] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.13
> [ 1.845682] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 1.846640] usb usb3: Product: xHCI Host Controller
> [ 1.847492] usb usb3: Manufacturer: Linux 6.13.0-rc2-ipu6+ xhci-hcd
> [ 1.848319] usb usb3: SerialNumber: 0000:00:14.0
> [ 1.849216] hub 3-0:1.0: USB hub found
> [ 1.850050] hub 3-0:1.0: 12 ports detected
> [ 1.851568] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.13
> [ 1.852396] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 1.853232] usb usb4: Product: xHCI Host Controller
> [ 1.854048] usb usb4: Manufacturer: Linux 6.13.0-rc2-ipu6+ xhci-hcd
> [ 1.855166] usb usb4: SerialNumber: 0000:00:14.0
> [ 1.856012] hub 4-0:1.0: USB hub found
> [ 1.856819] hub 4-0:1.0: 2 ports detected
> [ 1.874687] hid-generic 0018:04F3:422C.0002: input,hidraw1: I2C HID v1.00 Keyboard [ELAN2513:00 04F3:422C] on i2c-ELAN2513:00
> [ 2.031338] i915 0000:00:02.0: [drm] Found meteorlake (device ID 7d55) display version 14.00 stepping C0
> [ 2.033565] i915 0000:00:02.0: [drm] VT-d active for gfx access
> [ 2.034537] Console: switching to colour dummy device 80x25
> [ 2.034553] i915 0000:00:02.0: vgaarb: deactivate vga console
> [ 2.034566] i915 0000:00:02.0: [drm] Using Transparent Hugepages
> [ 2.054354] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=io+mem
> [ 2.062663] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/mtl_dmc.bin (v2.23)
> [ 2.095109] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/mtl_guc_70.bin version 70.36.0
> [ 2.109522] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled
> [ 2.109525] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled
> [ 2.109734] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled
> [ 2.114273] i915 0000:00:02.0: [drm] GT1: can't init GSC proxy due to missing mei component
> [ 2.114495] i915 0000:00:02.0: [drm] GT1: GuC firmware i915/mtl_guc_70.bin version 70.36.0
> [ 2.114497] i915 0000:00:02.0: [drm] GT1: HuC firmware i915/mtl_huc_gsc.bin version 8.5.4
> [ 2.132248] input: ELAN07CE:00 04F3:32C8 Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN07CE:00/0018:04F3:32C8.0001/input/input22
> [ 2.132317] input: ELAN07CE:00 04F3:32C8 Consumer Control as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN07CE:00/0018:04F3:32C8.0001/input/input23
> [ 2.132349] hid-multitouch 0018:04F3:32C8.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN07CE:00 04F3:32C8] on i2c-ELAN07CE:00
> [ 2.134315] usb 3-3: new full-speed USB device number 2 using xhci_hcd
> [ 2.136624] i915 0000:00:02.0: [drm] GT1: HuC: authenticated for clear media
> [ 2.136976] i915 0000:00:02.0: [drm] GT1: GUC: submission enabled
> [ 2.136978] i915 0000:00:02.0: [drm] GT1: GUC: SLPC enabled
> [ 2.137044] i915 0000:00:02.0: [drm] GT1: GUC: RC enabled
> [ 2.139323] i915 0000:00:02.0: [drm] Protected Xe Path (PXP) protected content support initialized
> [ 2.146052] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0
> [ 2.146464] ACPI: video: Video Device [PXSX] (multi-head: no rom: yes post: no)
> [ 2.146494] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input24
> [ 2.171655] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
> [ 2.172018] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input25
> [ 2.205867] fbcon: i915drmfb (fb0) is primary device
> [ 2.258312] tpm tpm0: auth session is active
> [ 2.272157] usb 3-3: New USB device found, idVendor=06cb, idProduct=016c, bcdDevice= 0.00
> [ 2.272161] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=1
> [ 2.272163] usb 3-3: SerialNumber: 17f07122a011
> [ 2.278271] i915 0000:00:02.0: [drm] GT1: Loaded GSC firmware i915/mtl_gsc_1.bin (cv1.0, r102.1.15.1926, svn 1)
> [ 2.298362] i915 0000:00:02.0: [drm] GT1: HuC: authenticated for all workloads
> [ 2.298369] i915 0000:00:02.0: [drm] *ERROR* GT1: GSC proxy handler failed to init
> [ 2.304686] input: ELAN2513:00 04F3:422C as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-ELAN2513:00/0018:04F3:422C.0002/input/input26
> [ 2.304741] input: ELAN2513:00 04F3:422C UNKNOWN as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-ELAN2513:00/0018:04F3:422C.0002/input/input27
> [ 2.304760] input: ELAN2513:00 04F3:422C UNKNOWN as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-ELAN2513:00/0018:04F3:422C.0002/input/input28
> [ 2.304779] input: ELAN2513:00 04F3:422C Stylus as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-ELAN2513:00/0018:04F3:422C.0002/input/input29
> [ 2.304823] input: ELAN2513:00 04F3:422C Keyboard as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-ELAN2513:00/0018:04F3:422C.0002/input/input30
> [ 2.304844] input: ELAN2513:00 04F3:422C Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-ELAN2513:00/0018:04F3:422C.0002/input/input31
> [ 2.304886] input: ELAN2513:00 04F3:422C UNKNOWN as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-ELAN2513:00/0018:04F3:422C.0002/input/input33
> [ 2.304903] input: ELAN2513:00 04F3:422C UNKNOWN as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-ELAN2513:00/0018:04F3:422C.0002/input/input34
> [ 2.304920] input: ELAN2513:00 04F3:422C UNKNOWN as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-ELAN2513:00/0018:04F3:422C.0002/input/input35
> [ 2.348301] hid-multitouch 0018:04F3:422C.0002: input,hidraw1: I2C HID v1.00 Keyboard [ELAN2513:00 04F3:422C] on i2c-ELAN2513:00
> [ 2.390281] usb 3-10: new full-speed USB device number 3 using xhci_hcd
> [ 2.528778] usb 3-10: New USB device found, idVendor=8087, idProduct=0033, bcdDevice= 0.00
> [ 2.528787] usb 3-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> [ 2.723685] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6
> [ 2.730741] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
> [ 2.736281] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
> [ 2.745678] hid-generic 001F:8087:0AC2.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
> [ 2.752822] hid-generic 001F:8087:0AC2.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
> [ 2.758782] hid-generic 001F:8087:0AC2.0007: hidraw6: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
> [ 2.760210] hid-generic 001F:8087:0AC2.0008: hidraw7: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
> [ 2.762240] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
> [ 2.763680] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
> [ 2.764864] hid-sensor-hub 001F:8087:0AC2.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
> [ 2.765812] hid-sensor-hub 001F:8087:0AC2.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
> [ 2.766769] hid-sensor-hub 001F:8087:0AC2.0007: hidraw6: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
> [ 2.767055] hid-sensor-hub 001F:8087:0AC2.0008: hidraw7: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
> [ 3.602349] Console: switching to colour frame buffer device 180x56
> [ 3.614858] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
> [ 3.750266] raid6: avx2x4 gen() 61745 MB/s
> [ 3.818281] raid6: avx2x2 gen() 62314 MB/s
> [ 3.886266] raid6: avx2x1 gen() 60798 MB/s
> [ 3.886972] raid6: using algorithm avx2x2 gen() 62314 MB/s
> [ 3.954266] raid6: .... xor() 42241 MB/s, rmw enabled
> [ 3.955029] raid6: using avx2x2 recovery algorithm
> [ 3.957738] xor: automatically using best checksumming function avx
> [ 3.959819] async_tx: api initialized (async)
> [ 4.141061] Btrfs loaded, zoned=yes, fsverity=yes
> [ 4.198188] PM: Image not found (code -22)
> [ 4.254622] EXT4-fs (nvme0n1p4): orphan cleanup on readonly fs
> [ 4.254783] EXT4-fs (nvme0n1p4): mounted filesystem 7881f7bb-dbe6-4323-887f-dd718adb7a8b ro with ordered data mode. Quota mode: none.
> [ 4.289508] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
> [ 4.327016] systemd[1]: Inserted module 'autofs4'
> [ 4.357878] systemd[1]: systemd 257.1-1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +BTF -XKBCOMMON -UTMP +SYSVINIT +LIBARCHIVE)
> [ 4.357885] systemd[1]: Detected architecture x86-64.
> [ 4.362389] systemd[1]: Hostname set to <DuanesSpectre16>.
> [ 4.418313] systemd[1]: bpf-restrict-fs: Failed to load BPF object: No such process
> [ 4.496358] systemd[1]: Queued start job for default target graphical.target.
> [ 4.549914] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
> [ 4.550853] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
> [ 4.551607] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
> [ 4.552405] systemd[1]: Created slice system-xfs_scrub.slice - xfs_scrub background service slice.
> [ 4.553177] systemd[1]: Created slice user.slice - User and Session Slice.
> [ 4.553994] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
> [ 4.555068] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
> [ 4.555903] systemd[1]: Expecting device dev-disk-by\x2duuid-12DE8F49DE8F2457.device - /dev/disk/by-uuid/12DE8F49DE8F2457...
> [ 4.557084] systemd[1]: Expecting device dev-disk-by\x2duuid-96c2339a\x2dae0c\x2d4a9d\x2d9d62\x2dfbbce901defc.device - /dev/disk/by-uuid/96c2339a-ae0c-4a9d-9d62-fbbce901defc...
> [ 4.558408] systemd[1]: Expecting device dev-disk-by\x2duuid-9DB2\x2d2D80.device - /dev/disk/by-uuid/9DB2-2D80...
> [ 4.559035] systemd[1]: Reached target nss-user-lookup.target - User and Group Name Lookups.
> [ 4.560479] systemd[1]: Reached target slices.target - Slice Units.
> [ 4.563820] systemd[1]: Listening on rpcbind.socket - RPCbind Server Activation Socket.
> [ 4.567715] systemd[1]: Listening on systemd-coredump.socket - Process Core Dump Socket.
> [ 4.569390] systemd[1]: Listening on systemd-creds.socket - Credential Encryption/Decryption.
> [ 4.571194] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
> [ 4.573187] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
> [ 4.575231] systemd[1]: Listening on systemd-journald.socket - Journal Sockets.
> [ 4.577246] systemd[1]: systemd-pcrextend.socket - TPM PCR Measurements was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
> [ 4.577252] systemd[1]: systemd-pcrlock.socket - Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
> [ 4.577282] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
> [ 4.580942] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
> [ 4.584321] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
> [ 4.586631] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
> [ 4.588758] systemd[1]: Mounting run-lock.mount - Legacy Locks Directory /run/lock...
> [ 4.592052] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
> [ 4.595242] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
> [ 4.597017] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab).
> [ 4.597981] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
> [ 4.601506] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
> [ 4.604554] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
> [ 4.607049] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
> [ 4.609604] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
> [ 4.613962] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
> [ 4.617651] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
> [ 4.617674] systemd[1]: systemd-hibernate-clear.service - Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67).
> [ 4.621753] pstore: Using crash dump compression: deflate
> [ 4.625463] systemd[1]: Starting systemd-journald.service - Journal Service...
> [ 4.629044] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
> [ 4.630868] systemd[1]: systemd-pcrmachine.service - TPM PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
> [ 4.631722] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
> [ 4.634480] systemd[1]: systemd-tpm2-setup-early.service - Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
> [ 4.635365] systemd[1]: Starting systemd-udev-load-credentials.service - Load udev Rules from Credentials...
> [ 4.635662] pstore: Registered efi_pstore as persistent store backend
> [ 4.640493] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
> [ 4.644202] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.
> [ 4.646275] systemd-journald[542]: Collecting audit messages is disabled.
> [ 4.646595] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
> [ 4.649011] lp: driver loaded but no devices found
> [ 4.651020] systemd[1]: Mounted run-lock.mount - Legacy Locks Directory /run/lock.
> [ 4.653908] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
> [ 4.656357] ppdev: user-space parallel port driver
> [ 4.658939] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
> [ 4.661820] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
> [ 4.664162] systemd[1]: modprobe@configfs.service: Deactivated successfully.
> [ 4.664246] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs.
> [ 4.668073] systemd[1]: modprobe@drm.service: Deactivated successfully.
> [ 4.668147] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm.
> [ 4.671600] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
> [ 4.672712] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
> [ 4.675519] systemd[1]: Started systemd-journald.service - Journal Service.
> [ 4.683078] EXT4-fs (nvme0n1p4): re-mounted 7881f7bb-dbe6-4323-887f-dd718adb7a8b r/w. Quota mode: none.
> [ 4.698181] systemd-journald[542]: Received client request to flush runtime journal.
> [ 4.803050] ACPI: AC: AC Adapter [ADP1] (off-line)
> [ 4.812395] input: Intel HID events as /devices/platform/INTC1077:00/input/input37
> [ 4.812865] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002)
> [ 4.813404] int3472-discrete INT3472:01: Sensor module id: 'CJFME62'
> [ 4.814743] Consider using thermal netlink events interface
> [ 4.814919] int3472-discrete INT3472:01: unknown \_SB.GPI0 pin 65 active-high
> [ 4.814923] int3472-discrete INT3472:01: GPIO type 0x12 unknown; the sensor may not work
> [ 4.815009] int3472-discrete INT3472:01: privacy-led \_SB.GPI0 pin number mismatch _DSM 11 resource 107
> [ 4.815011] int3472-discrete INT3472:01: privacy-led \_SB.GPI0 pin 107 active-high
> [ 4.815214] intel-hid INTC1077:00: failed to enable HID power button
> [ 4.818943] input: Intel HID events as /devices/platform/INT33D5:00/input/input38
> [ 4.818987] int3472-discrete INT3472:02: Sensor module id: 'CJFME62'
> [ 4.819385] int3472-discrete INT3472:02: reset \_SB.GPI0 pin number mismatch _DSM 49 resource 209
> [ 4.820109] mc: Linux media interface: v0.10
> [ 4.822345] intel-hid INT33D5:00: platform supports 5 button array
> [ 4.822696] int3472-discrete INT3472:02: reset \_SB.GPI0 pin 209 active-low
> [ 4.824295] input: Intel HID 5 button array as /devices/platform/INT33D5:00/input/input39
> [ 4.830938] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.LPCB.HEC.DPTF.FCHG], AE_NOT_FOUND (20240827/psargs-332)
> [ 4.830943] ACPI Error: Aborting method \_SB.IETM.CHRG.PPSS due to previous error (AE_NOT_FOUND) (20240827/psparse-529)
> [ 4.837449] videodev: Linux video capture interface: v2.00
> [ 4.837721] resource: resource sanity check: requesting [mem 0x00000000fedc0000-0x00000000fedcffff], which spans more than pnp 00:03 [mem 0xfedc0000-0xfedc7fff]
> [ 4.837726] caller igen6_probe+0x17f/0x7f2 [igen6_edac] mapping multiple BARs
> [ 4.838514] pci 0000:00:08.0: Setting to D3hot
> [ 4.841834] EDAC MC0: Giving out device to module igen6_edac controller Intel_client_SoC MC#0: DEV 0000:00:00.0 (INTERRUPT)
> [ 4.844584] EDAC MC1: Giving out device to module igen6_edac controller Intel_client_SoC MC#1: DEV 0000:00:00.0 (INTERRUPT)
> [ 4.844608] EDAC igen6 MC1: HANDLING IBECC MEMORY ERROR
> [ 4.844609] EDAC igen6 MC1: ADDR 0x7fffffffe0
> [ 4.844611] EDAC igen6 MC0: HANDLING IBECC MEMORY ERROR
> [ 4.844612] EDAC igen6 MC0: ADDR 0x7fffffffe0
> [ 4.844652] EDAC igen6: v2.5.1
> [ 4.847201] intel-ipu6 0000:00:05.0: enabling device (0000 -> 0002)
> [ 4.851180] intel-ipu6 0000:00:05.0: IPU6 in secure mode touch 0x80000000 mask 0x0
> [ 4.851854] Serial bus multi instantiate pseudo device driver CSC3551:00: Instantiated 2 I2C devices.
> [ 4.854144] pci 0000:00:0b.0: Setting to D3hot
> [ 4.861315] ov08x40 i2c-OVTI08F4:00: failed to check hwcfg: -517
> [ 4.864574] ov08x40 i2c-OVTI08F4:00: failed to check hwcfg: -517
> [ 4.864646] iTCO_vendor_support: vendor-support=0
> [ 4.865722] input: PC Speaker as /devices/platform/pcspkr/input/input40
> [ 4.865744] intel-ipu6 0000:00:05.0: FW version: 20230925
> [ 4.867524] ov08x40 i2c-OVTI08F4:00: failed to check hwcfg: -517
> [ 4.867607] intel-ipu6 0000:00:05.0: Found supported sensor OVTI08F4:00
> [ 4.867672] intel-ipu6 0000:00:05.0: Connected 1 cameras
> [ 4.868590] pci 0000:00:14.2: enabling device (0000 -> 0002)
> [ 4.869127] intel-ipu6 0000:00:05.0: Sending BOOT_LOAD to CSE
> [ 4.869600] ov08x40 i2c-OVTI08F4:00: supply dovdd not found, using dummy regulator
> [ 4.869617] ov08x40 i2c-OVTI08F4:00: supply avdd not found, using dummy regulator
> [ 4.869621] ov08x40 i2c-OVTI08F4:00: supply dvdd not found, using dummy regulator
> [ 4.871127] intel_pmc_core INT33A1:00: Assuming a default substate order for this platform
> [ 4.882306] intel_pmc_core INT33A1:00: initialized
> [ 4.887644] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=6, TCOBASE=0x0400)
> [ 4.887894] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
> [ 4.888606] input: HP WMI hotkeys as /devices/virtual/input/input41
> [ 4.909858] intel-ipu6 0000:00:05.0: Sending AUTHENTICATE_RUN to CSE
> [ 4.942904] Error: Driver 'pcspkr' is already registered, aborting...
> [ 4.942908] proc_thermal_pci 0000:00:04.0: enabling device (0000 -> 0002)
> [ 4.942935] Bluetooth: Core ver 2.22
> [ 4.943222] NET: Registered PF_BLUETOOTH protocol family
> [ 4.943223] Bluetooth: HCI device and connection manager initialized
> [ 4.943226] Bluetooth: HCI socket layer initialized
> [ 4.943228] Bluetooth: L2CAP socket layer initialized
> [ 4.943231] Bluetooth: SCO socket layer initialized
> [ 4.944037] intel_rapl_common: Found RAPL domain package
> [ 4.944276] cfg80211: Loading compiled-in X.509 certificates for regulatory database
> [ 4.944482] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
> [ 4.944666] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
> [ 4.954960] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
> [ 4.954962] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
> [ 4.954963] RAPL PMU: hw unit of domain package 2^-14 Joules
> [ 4.954963] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
> [ 4.955416] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
> [ 4.956073] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: Adding DSD properties for 103C8C17
> [ 4.956899] intel-ipu6 0000:00:05.0: CSE authenticate_run done
> [ 4.958245] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: Using extra _DSD properties, bypassing _DSD in ACPI
> [ 4.958886] intel-ipu6 0000:00:05.0: IPU6-v4[7d19] hardware version 6
> [ 4.961416] cryptd: max_cpu_qlen set to 1000
> [ 4.964748] intel_rapl_msr: PL4 support detected.
> [ 4.964781] intel_rapl_common: Found RAPL domain package
> [ 4.964783] intel_rapl_common: Found RAPL domain core
> [ 4.964784] intel_rapl_common: Found RAPL domain uncore
> [ 4.996360] Intel(R) Wireless WiFi driver for Linux
> [ 4.996405] iwlwifi 0000:00:14.3: enabling device (0000 -> 0002)
> [ 4.998054] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: Cirrus Logic CS35L41 (35a40), Revision: B2
> [ 4.998230] iwlwifi 0000:00:14.3: Detected crf-id 0x400410, cnv-id 0x1080800 wfpm id 0x80005b20
> [ 4.998241] iwlwifi 0000:00:14.3: PCI dev 7e40/0094, rev=0x441, rfid=0x2010d000
> [ 4.998244] iwlwifi 0000:00:14.3: Detected Intel(R) Wi-Fi 6E AX211 160MHz
> [ 5.003789] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.1: Adding DSD properties for 103C8C17
> [ 5.004210] usbcore: registered new interface driver btusb
> [ 5.004248] AES CTR mode by8 optimization enabled
> [ 5.004719] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.1: Using extra _DSD properties, bypassing _DSD in ACPI
> [ 5.004721] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.1: Reset line busy, assuming shared reset
> [ 5.005415] iwlwifi 0000:00:14.3: TLV_FW_FSEQ_VERSION: FSEQ Version: 0.0.3.94
> [ 5.005866] iwlwifi 0000:00:14.3: loaded firmware version 89.6b44fa0b.0 ma-b0-gf-a0-89.ucode op_mode iwlmvm
> [ 5.006323] Bluetooth: hci0: Device revision is 0
> [ 5.009912] Adding 66559996k swap on /dev/nvme0n1p7. Priority:-2 extents:1 across:66559996k SS
> [ 5.010175] Bluetooth: hci0: Secure boot is enabled
> [ 5.016902] Bluetooth: hci0: OTP lock is enabled
> [ 5.016904] Bluetooth: hci0: API lock is enabled
> [ 5.016904] Bluetooth: hci0: Debug lock is disabled
> [ 5.016905] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
> [ 5.016906] Bluetooth: hci0: Bootloader timestamp 2022.18 buildtype 1 build 49266
> [ 5.017134] Bluetooth: hci0: DSM reset method type: 0x00
> [ 5.025716] Bluetooth: hci0: Found device firmware: intel/ibt-0180-0041.sfi
> [ 5.025725] Bluetooth: hci0: Boot Address: 0x100800
> [ 5.025726] Bluetooth: hci0: Firmware Version: 99-33.24
> [ 5.039422] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.1: Cirrus Logic CS35L41 (35a40), Revision: B2
> [ 5.058764] snd_hda_intel 0000:00:1f.3: Digital mics found on Skylake+ platform, using SOF driver
> [ 5.058826] snd_hda_intel 0000:56:00.1: enabling device (0000 -> 0002)
> [ 5.059016] snd_hda_intel 0000:56:00.1: Disabling MSI
> [ 5.059026] snd_hda_intel 0000:56:00.1: Handle vga_switcheroo audio client
> [ 5.074080] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1c.0/0000:56:00.1/sound/card0/input42
> [ 5.074138] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1c.0/0000:56:00.1/sound/card0/input43
> [ 5.074168] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1c.0/0000:56:00.1/sound/card0/input44
> [ 5.074218] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1c.0/0000:56:00.1/sound/card0/input45
> [ 5.079400] [643] intel-ipu6 0000:00:05.0: remote endpoint port 0 with 4 lanes added
> [ 5.079411] [643] intel_ipu6_isys.isys intel_ipu6.isys.40: bind ov08x40 4-0036 nlanes is 4 port is 0
> [ 5.083787] typec port0: bound usb3-port1 (ops connector_ops [usbcore])
> [ 5.083812] typec port0: bound usb2-port1 (ops connector_ops [usbcore])
> [ 5.152421] sof-audio-pci-intel-mtl 0000:00:1f.3: enabling device (0000 -> 0002)
> [ 5.152598] sof-audio-pci-intel-mtl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if 0x040100
> [ 5.152663] sof-audio-pci-intel-mtl 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
> [ 5.159424] sof-audio-pci-intel-mtl 0000:00:1f.3: use msi interrupt mode
> [ 5.177344] sof-audio-pci-intel-mtl 0000:00:1f.3: hda codecs found, mask 5
> [ 5.177346] sof-audio-pci-intel-mtl 0000:00:1f.3: using HDA machine driver skl_hda_dsp_generic now
> [ 5.177347] sof-audio-pci-intel-mtl 0000:00:1f.3: NHLT device BT(0) detected, ssp_mask 0x4
> [ 5.177348] sof-audio-pci-intel-mtl 0000:00:1f.3: BT link detected in NHLT tables: 0x4
> [ 5.177349] sof-audio-pci-intel-mtl 0000:00:1f.3: DMICs detected in NHLT tables: 2
> [ 5.182099] sof-audio-pci-intel-mtl 0000:00:1f.3: Firmware paths/files for ipc type 1:
> [ 5.182100] sof-audio-pci-intel-mtl 0000:00:1f.3: Firmware file: intel/sof-ipc4/mtl/sof-mtl.ri
> [ 5.182100] sof-audio-pci-intel-mtl 0000:00:1f.3: Firmware lib path: intel/sof-ipc4-lib/mtl
> [ 5.182101] sof-audio-pci-intel-mtl 0000:00:1f.3: Topology file: intel/sof-ace-tplg/sof-hda-generic-2ch.tplg
> [ 5.182684] sof-audio-pci-intel-mtl 0000:00:1f.3: Loaded firmware library: ADSPFW, version: 2.11.1.1
> [ 5.318879] sof-audio-pci-intel-mtl 0000:00:1f.3: Booted firmware version: 2.11.1.1
> [ 5.319987] iwlwifi 0000:00:14.3: Not valid error log pointer 0x0024B5C0 for RT uCode
> [ 5.320022] iwlwifi 0000:00:14.3: WFPM_UMAC_PD_NOTIFICATION: 0x1f
> [ 5.320038] iwlwifi 0000:00:14.3: WFPM_LMAC2_PD_NOTIFICATION: 0x1f
> [ 5.320045] iwlwifi 0000:00:14.3: WFPM_AUTH_KEY_0: 0x80
> [ 5.320053] iwlwifi 0000:00:14.3: CNVI_SCU_SEQ_DATA_DW9: 0x0
> [ 5.320824] iwlwifi 0000:00:14.3: RFIm is deactivated, reason = 4
> [ 5.327656] iwlwifi 0000:00:14.3: loaded PNVM version 16611aa6
> [ 5.331167] sof-audio-pci-intel-mtl 0000:00:1f.3: Topology: ABI 3:29:1 Kernel ABI 3:23:1
> [ 5.331434] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: Parent card not yet available, widget card binding deferred
> [ 5.342628] iwlwifi 0000:00:14.3: Detected RF GF, rfid=0x2010d000
> [ 5.350407] snd_hda_codec_realtek ehdaudio0D0: ALC245: picked fixup for PCI SSID 103c:8c17
> [ 5.352524] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: DSP1: cirrus/cs35l41-dsp1-spk-prot-103c8c17.wmfw: format 3 timestamp 0x630cb3c2
> [ 5.353173] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: DSP1: cirrus/cs35l41-dsp1-spk-prot-103c8c17.wmfw: Mon 29 Aug 2022 14:40:34 W. Europe Daylight Time
> [ 5.408579] iwlwifi 0000:00:14.3: base HW address: d0:65:78:ec:0a:e5
> [ 5.452551] iwlwifi 0000:00:14.3 wlo1: renamed from wlan0
> [ 5.744481] audit: type=1400 audit(1734788184.120:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=1033 comm="apparmor_parser"
> [ 5.744526] audit: type=1400 audit(1734788184.120:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=1031 comm="apparmor_parser"
> [ 5.745068] audit: type=1400 audit(1734788184.120:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1029 comm="apparmor_parser"
> [ 5.745070] audit: type=1400 audit(1734788184.120:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1029 comm="apparmor_parser"
> [ 5.745070] audit: type=1400 audit(1734788184.120:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1029 comm="apparmor_parser"
> [ 5.745216] audit: type=1400 audit(1734788184.120:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/libexec/ibus-engine-hangul" pid=1035 comm="apparmor_parser"
> [ 5.745325] audit: type=1400 audit(1734788184.120:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oosplash" pid=1030 comm="apparmor_parser"
> [ 5.745375] audit: type=1400 audit(1734788184.120:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1022 comm="apparmor_parser"
> [ 5.745573] audit: type=1400 audit(1734788184.120:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1037 comm="apparmor_parser"
> [ 5.745612] audit: type=1400 audit(1734788184.120:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1025 comm="apparmor_parser"
> [ 5.805435] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: DSP1: Firmware: 400a4 vendor: 0x2 v0.60.0, 2 algorithms
> [ 5.807319] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: DSP1: cirrus/cs35l41-dsp1-spk-prot-103c8c17-spkid0-l0.bin: v0.60.0
> [ 5.807323] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: DSP1: spk-prot: C:\Users\tlu\Desktop\HP_Consumer\CY23\Herbie\Official_release\20230512_tooling_4KHz-6dBhighshelf\HP_
> [ 5.821816] nvme nvme0: using unchecked data buffer
> [ 5.823213] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
> [ 5.823215] Bluetooth: BNEP filters: protocol multicast
> [ 5.823218] Bluetooth: BNEP socket layer initialized
> [ 5.848455] block nvme0n1: No UUID available providing old NGUID
> [ 5.865926] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: Calibration applied: R0=10501
> [ 5.873651] NET: Registered PF_QIPCRTR protocol family
> [ 5.880204] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: Firmware Loaded - Type: spk-prot, Gain: 17
> [ 5.880897] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: CS35L41 Bound - SSID: 103C8C17, BST: 0, VSPK: 0, CH: L, FW EN: 1, SPKID: 0
> [ 5.881477] snd_hda_codec_realtek ehdaudio0D0: bound i2c-CSC3551:00-cs35l41-hda.0 (ops cs35l41_hda_comp_ops [snd_hda_scodec_cs35l41])
> [ 5.882614] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.1: DSP1: cirrus/cs35l41-dsp1-spk-prot-103c8c17.wmfw: format 3 timestamp 0x630cb3c2
> [ 5.882616] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.1: DSP1: cirrus/cs35l41-dsp1-spk-prot-103c8c17.wmfw: Mon 29 Aug 2022 14:40:34 W. Europe Daylight Time
> [ 6.264974] iwlwifi 0000:00:14.3: Not valid error log pointer 0x0024B5C0 for RT uCode
> [ 6.267057] iwlwifi 0000:00:14.3: WFPM_UMAC_PD_NOTIFICATION: 0x1f
> [ 6.267075] iwlwifi 0000:00:14.3: RFIm is deactivated, reason = 4
> [ 6.268774] iwlwifi 0000:00:14.3: WFPM_LMAC2_PD_NOTIFICATION: 0x1f
> [ 6.270844] iwlwifi 0000:00:14.3: WFPM_AUTH_KEY_0: 0x80
> [ 6.271782] iwlwifi 0000:00:14.3: CNVI_SCU_SEQ_DATA_DW9: 0x0
> [ 6.334462] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.1: DSP1: Firmware: 400a4 vendor: 0x2 v0.60.0, 2 algorithms
> [ 6.336625] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.1: DSP1: cirrus/cs35l41-dsp1-spk-prot-103c8c17-spkid0-r0.bin: v0.60.0
> [ 6.337474] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.1: DSP1: spk-prot: C:\Users\tlu\Desktop\HP_Consumer\CY23\Herbie\Official_release\20230512_tooling_4KHz-6dBhighshelf\HP_
> [ 6.357398] iwlwifi 0000:00:14.3: Registered PHC clock: iwlwifi-PTP, with index: 0
> [ 6.396782] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.1: Calibration applied: R0=10902
> [ 6.411423] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.1: Firmware Loaded - Type: spk-prot, Gain: 17
> [ 6.412505] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.1: CS35L41 Bound - SSID: 103C8C17, BST: 0, VSPK: 0, CH: R, FW EN: 1, SPKID: 0
> [ 6.413495] snd_hda_codec_realtek ehdaudio0D0: bound i2c-CSC3551:00-cs35l41-hda.1 (ops cs35l41_hda_comp_ops [snd_hda_scodec_cs35l41])
> [ 6.415642] snd_hda_codec_realtek ehdaudio0D0: autoconfig for ALC245: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
> [ 6.415647] snd_hda_codec_realtek ehdaudio0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
> [ 6.415650] snd_hda_codec_realtek ehdaudio0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
> [ 6.415651] snd_hda_codec_realtek ehdaudio0D0: mono: mono_out=0x0
> [ 6.415652] snd_hda_codec_realtek ehdaudio0D0: inputs:
> [ 6.415654] snd_hda_codec_realtek ehdaudio0D0: Mic=0x19
> [ 6.458624] skl_hda_dsp_generic skl_hda_dsp_generic: hda_dsp_hdmi_build_controls: no PCM in topology for HDMI converter 3
> [ 6.475723] input: sof-hda-dsp Mic as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card1/input46
> [ 6.476458] input: sof-hda-dsp Headphone as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card1/input47
> [ 6.477285] input: sof-hda-dsp HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card1/input48
> [ 6.477943] input: sof-hda-dsp HDMI/DP,pcm=4 as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card1/input49
> [ 6.479398] input: sof-hda-dsp HDMI/DP,pcm=5 as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card1/input50
> [ 6.509470] hid-sensor-hub 001F:8087:0AC2.0005: hid_field_extract() called with n (192) > 32! (kworker/15:1)
> [ 6.510886] Bluetooth: hci0: Waiting for firmware download to complete
> [ 6.512036] Bluetooth: hci0: Firmware loaded in 1451481 usecs
> [ 6.513113] Bluetooth: hci0: Waiting for device to boot
> [ 6.555291] Bluetooth: hci0: Device booted in 41205 usecs
> [ 6.558867] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-0180-0041.ddc
> [ 6.560287] Bluetooth: hci0: Applying Intel DDC parameters completed
> [ 6.564430] Bluetooth: hci0: Firmware timestamp 2024.33 buildtype 1 build 3427
> [ 6.565507] Bluetooth: hci0: Firmware SHA1: 0xd028ffe4
> [ 6.570334] Bluetooth: hci0: Fseq status: Success (0x00)
> [ 6.571281] Bluetooth: hci0: Fseq executed: 00.00.03.94
> [ 6.571686] iwlwifi 0000:00:14.3: Not valid error log pointer 0x0024B5C0 for RT uCode
> [ 6.572397] Bluetooth: hci0: Fseq BT Top: 00.00.03.94
> [ 6.574444] iwlwifi 0000:00:14.3: WFPM_UMAC_PD_NOTIFICATION: 0x1f
> [ 6.574464] iwlwifi 0000:00:14.3: RFIm is deactivated, reason = 4
> [ 6.576089] iwlwifi 0000:00:14.3: WFPM_LMAC2_PD_NOTIFICATION: 0x1f
> [ 6.576095] iwlwifi 0000:00:14.3: WFPM_AUTH_KEY_0: 0x80
> [ 6.577168] iwlwifi 0000:00:14.3: CNVI_SCU_SEQ_DATA_DW9: 0x0
> [ 6.674991] Bluetooth: MGMT ver 1.23
> [ 6.680311] NET: Registered PF_ALG protocol family
> [ 6.714868] Bluetooth: RFCOMM TTY layer initialized
> [ 6.716187] Bluetooth: RFCOMM socket layer initialized
> [ 6.716894] Bluetooth: RFCOMM ver 1.11
> [ 6.718027] RPC: Registered named UNIX socket transport module.
> [ 6.718733] RPC: Registered udp transport module.
> [ 6.719200] RPC: Registered tcp transport module.
> [ 6.719201] RPC: Registered tcp-with-tls transport module.
> [ 6.719201] RPC: Registered tcp NFSv4.1 backchannel transport module.
> [ 10.573568] netfs: FS-Cache loaded
> [ 10.574845] Key type dns_resolver registered
> [ 10.627545] Key type cifs.spnego registered
> [ 10.628260] Key type cifs.idmap registered
> [ 10.629817] CIFS: VFS: Use of the less secure dialect vers=1.0 is not recommended unless required for access to very old servers
> [ 10.630718] CIFS: Attempting to mount //192.168.1.248/NetFolder
> [ 10.631830] CIFS: VFS: Error connecting to socket. Aborting operation.
> [ 10.631833] CIFS: VFS: cifs_mount failed w/return code = -101
> [ 10.683518] NFS: Registering the id_resolver key type
> [ 10.684372] Key type id_resolver registered
> [ 10.685188] Key type id_legacy registered
> [ 10.953201] i915 0000:00:02.0: [drm] Selective fetch area calculation failed in pipe A
> [ 19.997195] i915 0000:00:02.0: [drm] PHY A failed to request refclk after 1us.
> [ 21.137163] show_signal: 20 callbacks suppressed
> [ 21.137166] traps: light-locker[2375] trap int3 ip:7efc1e775f37 sp:7ffcd8f22cc0 error:0 in libglib-2.0.so.0.8200.4[64f37,7efc1e72f000+a0000]
> [ 21.208499] wlo1: authenticate with f8:85:f9:0d:a2:e1 (local address=d0:65:78:ec:0a:e5)
> [ 21.209076] wlo1: send auth to f8:85:f9:0d:a2:e1 (try 1/3)
> [ 21.239996] wlo1: authenticated
> [ 21.242354] wlo1: associate with f8:85:f9:0d:a2:e1 (try 1/3)
> [ 21.251645] wlo1: RX AssocResp from f8:85:f9:0d:a2:e1 (capab=0x1511 status=0 aid=5)
> [ 21.256324] wlo1: associated
> [ 21.256390] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by f8:85:f9:0d:a2:e1
> [ 21.271852] warning: `kdeconnectd' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
> [ 21.598030] audit: type=1400 audit(1734788199.972:32): apparmor="DENIED" operation="open" class="file" profile="mariadbd_akonadi" name="/sys/devices/system/node/" pid=2551 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
> [ 21.644010] audit: type=1400 audit(1734788200.020:33): apparmor="DENIED" operation="open" class="file" profile="mariadbd_akonadi" name="/sys/devices/system/node/" pid=2553 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
> [ 21.662236] audit: type=1400 audit(1734788200.036:34): apparmor="DENIED" operation="open" class="file" profile="mariadbd_akonadi" name="/usr/share/mariadb/charsets/Index.xml" pid=2553 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
> [ 21.670771] audit: type=1400 audit(1734788200.048:35): apparmor="DENIED" operation="open" class="file" profile="mariadbd_akonadi" name="/sys/block/" pid=2553 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
> [ 21.683626] audit: type=1400 audit(1734788200.060:36): apparmor="DENIED" operation="open" class="file" profile="mariadbd_akonadi" name="/proc/2553/cgroup" pid=2553 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
> [ 21.684119] audit: type=1400 audit(1734788200.060:37): apparmor="DENIED" operation="open" class="file" profile="mariadbd_akonadi" name="/sys/devices/pci0000:00/0000:00:06.0/0000:01:00.0/nvme/nvme0/nvme0n1/queue/physical_block_size" pid=2553 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
> [ 22.048486] audit: type=1400 audit(1734788200.424:38): apparmor="DENIED" operation="exec" class="file" profile="mariadbd_akonadi" name="/usr/bin/mariadb" pid=2575 comm="sh" requested_mask="x" denied_mask="x" fsuid=1000 ouid=0
> [ 28.378589] input: MX Anywhere 3S Mouse as /devices/virtual/misc/uhid/0005:046D:B037.0009/input/input51
> [ 28.378723] hid-generic 0005:046D:B037.0009: input,hidraw8: BLUETOOTH HID v0.03 Mouse [MX Anywhere 3S] on d0:65:78:ec:0a:e9
> [ 99.381714] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: buffer: Intel IPU6 ISYS Capture 0: configured size 18717248, buffer size 18717248
> [ 99.381720] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: queue buffer 0 for Intel IPU6 ISYS Capture 0
> [ 99.381721] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: iova: iova 0x00000000fe612000
> [ 99.381723] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: media pipeline is not ready for Intel IPU6 ISYS Capture 0
> [ 99.381724] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: stream: Intel IPU6 ISYS Capture 0: width 3856, height 2416, css pixelformat 24
> [ 99.381731] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: validating link "Intel IPU6 CSI2 0":1 -> "Intel IPU6 ISYS Capture 0"
> [ 99.394266] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: ltr: value 20 scale 2, did: value 20 scale 2
> [ 99.394792] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: prepare stream: external entity ov08x40 4-0036
> [ 99.394794] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: queue 1 of 1
> [ 99.394802] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: proxy send: req_id 0x2, index 2, offset 0x0, value 0x1
> [ 99.394920] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: Proxy response: id 2, error 0, details 0
> [ 99.394921] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: ltr: value 1023 scale 2, did: value 299 scale 2
> [ 99.394922] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: proxy send: req_id 0x1, index 1, offset 0x0, value 0x42
> [ 99.395038] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: Proxy response: id 1, error 0, details 0
> [ 99.395039] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: mem_open_threshold: 12
> [ 99.395039] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: proxy send: req_id 0x3, index 3, offset 0x0, value 0xc
> [ 99.395155] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: Proxy response: id 3, error 0, details 0
> [ 99.395156] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: threshold: 89 critical: 108
> [ 99.395156] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: proxy send: req_id 0x0, index 0, offset 0x0, value 0x6c
> [ 99.395271] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: Proxy response: id 0, error 0, details 0
> [ 99.395273] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: buffer: Intel IPU6 ISYS Capture 0: buffer 0
> [ 99.395274] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: get buffer list 000000000925ee70, 1 buffers
> [ 99.395276] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: set stream: 1
> [ 99.395277] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: -----------------------------------------------------
> [ 99.395278] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: IPU6_FW_ISYS_STREAM_CFG_DATA
> [ 99.395279] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: compfmt = 0
> [ 99.395279] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: src = 0
> [ 99.395280] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: vc = 0
> [ 99.395280] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: isl_use = 0
> [ 99.395281] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: sensor_type = 0
> [ 99.395281] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: send_irq_sof_discarded = 0
> [ 99.395282] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: send_irq_eof_discarded = 0
> [ 99.395282] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: send_resp_sof_discarded = 0
> [ 99.395283] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: send_resp_eof_discarded = 0
> [ 99.395283] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: crop:
> [ 99.395283] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: .left_top = [0, 0]
> [ 99.395284] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: .right_bottom = [0, 0]
> [ 99.395285] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: nof_input_pins = 1
> [ 99.395285] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: input pin[0]:
> [ 99.395286] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: .dt = 0x2b
> [ 99.395286] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: .mipi_store_mode = 0
> [ 99.395287] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: .bits_per_pix = 10
> [ 99.395287] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: .mapped_dt = 0x40
> [ 99.395288] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: .input_res = 3856x2416
> [ 99.395289] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: .mipi_decompression = 0
> [ 99.395289] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: .capture_mode = 0
> [ 99.395290] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: nof_output_pins = 1
> [ 99.395290] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: output_pin[0]:
> [ 99.395291] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: .input_pin_id = 0
> [ 99.395291] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: .output_res = 3856x2416
> [ 99.395292] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: .stride = 7744
> [ 99.395292] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: .pt = 3
> [ 99.395293] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: .payload_buf_size = 0
> [ 99.395293] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: .ft = 24
> [ 99.395294] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: .watermark_in_lines = 0
> [ 99.395294] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: .send_irq = 1
> [ 99.395295] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: .reserve_compression = 0
> [ 99.395295] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: .snoopable = 1
> [ 99.395296] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: .error_handling_enable = 0
> [ 99.395296] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: .sensor_type = 14
> [ 99.395297] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: -----------------------------------------------------
> [ 99.395297] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: send_token: STREAM_OPEN
> [ 99.395603] <intr> intel_ipu6_isys.isys intel_ipu6.isys.40: FW resp 00 STREAM_OPEN_DONE, stream 0, ts 0x0000000000000000, pin 0
> [ 99.395623] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: start stream: open complete
> [ 99.395626] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: queue buf list 000000000925ee70 flags 2, s 0, 1 bufs
> [ 99.395629] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: -----------------------------------------------------
> [ 99.395631] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: IPU6_FW_ISYS_FRAME_BUFF_SET
> [ 99.395632] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: output_pin[0]:
> [ 99.395634] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: .out_buf_id = 1
> [ 99.395636] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: .addr = 0xfe612000
> [ 99.395638] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: .compress = 0
> [ 99.395639] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: send_irq_sof = 0x1
> [ 99.395641] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: send_irq_eof = 0x0
> [ 99.395643] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: send_resp_sof = 0x1
> [ 99.395644] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: send_resp_eof = 0x0
> [ 99.395646] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: send_irq_capture_ack = 0x1
> [ 99.395647] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: send_irq_capture_done = 0x0
> [ 99.395649] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: send_resp_capture_ack = 0x1
> [ 99.395650] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: send_resp_capture_done = 0x1
> [ 99.395652] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: -----------------------------------------------------
> [ 99.395654] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: send_token: STREAM_START_AND_CAPTURE
> [ 99.395774] <intr> intel_ipu6_isys.isys intel_ipu6.isys.40: FW resp 02 STREAM_START_AND_CAPTURE_ACK, stream 0, ts 0x0000000000000000, pin 0
> [ 99.395781] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: start stream: complete
> [ 99.395782] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: stream on Intel IPU6 CSI2 0 pad 1 mask 0x1
> [ 99.395784] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: ctermen 0 csettle 680 dtermen 0 dsettle 660
> [ 99.395785] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: stream on CSI2-0 with 4 lanes
> [ 99.395998] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: config phy 0 and 1 in aggr mode
> [ 99.396000] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: Reset phy 0
> [ 99.396002] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x23803c = data 0x0
> [ 99.396005] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x238038 = data 0x0
> [ 99.396006] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x238048 = data 0x0
> [ 99.396008] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x23804c = data 0x2
> [ 99.396010] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: Reset phy 1
> [ 99.396011] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x238070 = data 0x0
> [ 99.396013] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x23806c = data 0x0
> [ 99.396015] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x23807c = data 0x0
> [ 99.396017] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x238080 = data 0x2
> [ 99.396019] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x23804c = data 0x1330
> [ 99.396037] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: DWC ifc read 0x133 = 0x1
> [ 99.396039] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x23804c = data 0x11331
> [ 99.396043] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x238080 = data 0x1330
> [ 99.396060] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: DWC ifc read 0x133 = 0x1
> [ 99.396061] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x238080 = data 0x1331
> [ 99.396062] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x23804c = data 0x3070
> [ 99.396076] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: DWC ifc read 0x307 = 0x0
> [ 99.396076] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x23804c = data 0x43071
> [ 99.396078] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x238080 = data 0x3070
> [ 99.396092] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: DWC ifc read 0x307 = 0x0
> [ 99.396092] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x238080 = data 0x3071
> [ 99.396094] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x23804c = data 0x5080
> [ 99.396108] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: DWC ifc read 0x508 = 0x0
> [ 99.396108] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x23804c = data 0x205081
> [ 99.396110] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x238080 = data 0x5080
> [ 99.396124] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: DWC ifc read 0x508 = 0x0
> [ 99.396124] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x238080 = data 0x205081
> [ 99.396126] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x23804c = data 0x7080
> [ 99.396139] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: DWC ifc read 0x708 = 0x0
> [ 99.396140] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x23804c = data 0x207081
> [ 99.396142] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x238080 = data 0x7080
> [ 99.396155] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: DWC ifc read 0x708 = 0x0
> [ 99.396156] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x238080 = data 0x207081
> [ 99.396158] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x23804c = data 0x3080
> [ 99.396171] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: DWC ifc read 0x308 = 0x0
> [ 99.396172] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x23804c = data 0x3081
> [ 99.396174] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x238080 = data 0x3080
> [ 99.396187] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: DWC ifc read 0x308 = 0x0
> [ 99.396188] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x238080 = data 0x83081
> [ 99.396190] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x238080 = data 0xe00
> [ 99.396203] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: DWC ifc read 0xe0 = 0x0
> [ 99.396204] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x238080 = data 0x30e01
> [ 99.396206] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x238080 = data 0xe10
> [ 99.396219] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: DWC ifc read 0xe1 = 0x0
> [ 99.396220] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x238080 = data 0x20e11
> [ 99.396222] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x238080 = data 0x3070
> [ 99.396235] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: DWC ifc read 0x307 = 0x0
> [ 99.396236] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x238080 = data 0x83071
> [ 99.396238] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x238080 = data 0x3040
> [ 99.396251] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: DWC ifc read 0x304 = 0x0
> [ 99.396252] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x238080 = data 0x803041
> [ 99.396254] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x238080 = data 0x3050
> [ 99.396267] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: DWC ifc read 0x305 = 0x0
> [ 99.396267] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x238080 = data 0xa3051
> [ 99.396269] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: config Dphy 0 with 800 mbps
> [ 99.396271] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: read: reg 0x238040 = data 0x0
> [ 99.396272] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x238040 = data 0x19
> [ 99.396272] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x23804c = data 0xe40
> [ 99.396286] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: DWC ifc read 0xe4 = 0x0
> [ 99.396286] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x23804c = data 0x10e41
> [ 99.396288] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x23804c = data 0xe20
> [ 99.396302] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: DWC ifc read 0xe2 = 0x0
> [ 99.396302] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x23804c = data 0x4f0e21
> [ 99.396304] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x23804c = data 0xe30
> [ 99.396318] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: DWC ifc read 0xe3 = 0x0
> [ 99.396318] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x23804c = data 0x10e31
> [ 99.396320] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x23804c = data 0x80
> [ 99.396333] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: DWC ifc read 0x8 = 0x1c
> [ 99.396334] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x23804c = data 0x3c0081
> [ 99.396336] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: ref_clk = 384 clk_freqrange = 85
> [ 99.396337] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: read: reg 0x238044 = data 0x0
> [ 99.396338] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x238044 = data 0x55
> [ 99.396339] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: read: reg 0x238068 = data 0x0
> [ 99.396339] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x238068 = data 0x10
> [ 99.396341] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: read: reg 0x238068 = data 0x10
> [ 99.396341] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x238068 = data 0x110
> [ 99.396342] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: config Dphy 1 with 800 mbps
> [ 99.396343] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: read: reg 0x238074 = data 0x0
> [ 99.396344] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x238074 = data 0x19
> [ 99.396344] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x238080 = data 0xe40
> [ 99.396358] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: DWC ifc read 0xe4 = 0x0
> [ 99.396358] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x238080 = data 0x10e41
> [ 99.396360] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x238080 = data 0xe20
> [ 99.396373] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: DWC ifc read 0xe2 = 0x0
> [ 99.396374] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x238080 = data 0x4f0e21
> [ 99.396376] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x238080 = data 0xe30
> [ 99.396389] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: DWC ifc read 0xe3 = 0x0
> [ 99.396390] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x238080 = data 0x10e31
> [ 99.396392] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x238080 = data 0x80
> [ 99.396405] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: DWC ifc read 0x8 = 0x1c
> [ 99.396406] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x238080 = data 0x3c0081
> [ 99.396408] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: ref_clk = 384 clk_freqrange = 85
> [ 99.396409] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: read: reg 0x238078 = data 0x0
> [ 99.396410] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x238078 = data 0x55
> [ 99.396411] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: read: reg 0x23809c = data 0x0
> [ 99.396411] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x23809c = data 0x10
> [ 99.396413] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: read: reg 0x23809c = data 0x10
> [ 99.396413] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x23809c = data 0x110
> [ 99.396414] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x238038 = data 0x1
> [ 99.396436] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x23803c = data 0x1
> [ 99.396437] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x23804c = data 0x1e0
> [ 99.396450] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: DWC ifc read 0x1e = 0x11
> [ 99.396552] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x23804c = data 0x1e0
> [ 99.396566] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: DWC ifc read 0x1e = 0x16
> [ 99.396668] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x23804c = data 0x1e0
> [ 99.396681] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: DWC ifc read 0x1e = 0x17
> [ 99.396682] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: read: reg 0x238068 = data 0x110
> [ 99.396683] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x238068 = data 0x100
> [ 99.396684] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: read: reg 0x238068 = data 0x100
> [ 99.396685] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x238068 = data 0x0
> [ 99.396685] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: Dphy 0 is ready!
> [ 99.396686] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x23806c = data 0x1
> [ 99.396708] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x238070 = data 0x1
> [ 99.396709] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x238080 = data 0x1e0
> [ 99.396722] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: DWC ifc read 0x1e = 0x11
> [ 99.396824] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x238080 = data 0x1e0
> [ 99.396838] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: DWC ifc read 0x1e = 0x19
> [ 99.396940] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x238080 = data 0x1e0
> [ 99.396954] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: DWC ifc read 0x1e = 0x17
> [ 99.396955] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: read: reg 0x23809c = data 0x110
> [ 99.396955] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x23809c = data 0x100
> [ 99.396956] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: read: reg 0x23809c = data 0x100
> [ 99.396957] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x23809c = data 0x0
> [ 99.396958] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: Dphy 1 is ready!
> [ 99.540604] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: buffer: Intel IPU6 ISYS Capture 0: configured size 18717248, buffer size 18717248
> [ 99.540607] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: queue buffer 1 for Intel IPU6 ISYS Capture 0
> [ 99.540608] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: iova: iova 0x00000000fd438000
> [ 99.540610] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: buffer: Intel IPU6 ISYS Capture 0: buffer 1
> [ 99.540610] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: get buffer list 000000006dbf51ce, 1 buffers
> [ 99.540612] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: -----------------------------------------------------
> [ 99.540613] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: IPU6_FW_ISYS_FRAME_BUFF_SET
> [ 99.540613] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: output_pin[0]:
> [ 99.540614] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: .out_buf_id = 2
> [ 99.540614] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: .addr = 0xfd438000
> [ 99.540615] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: .compress = 0
> [ 99.540616] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: send_irq_sof = 0x1
> [ 99.540616] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: send_irq_eof = 0x0
> [ 99.540617] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: send_resp_sof = 0x1
> [ 99.540617] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: send_resp_eof = 0x0
> [ 99.540618] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: send_irq_capture_ack = 0x0
> [ 99.540618] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: send_irq_capture_done = 0x0
> [ 99.540619] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: send_resp_capture_ack = 0x1
> [ 99.540619] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: send_resp_capture_done = 0x1
> [ 99.540620] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: -----------------------------------------------------
> [ 99.540620] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: queue buf list 000000006dbf51ce flags 2, s 0, 1 bufs
> [ 99.540621] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: send_token: STREAM_CAPTURE
> [ 99.540639] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: buffer: Intel IPU6 ISYS Capture 0: configured size 18717248, buffer size 18717248
> [ 99.540640] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: queue buffer 2 for Intel IPU6 ISYS Capture 0
> [ 99.540640] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: iova: iova 0x00000000fc25e000
> [ 99.540641] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: buffer: Intel IPU6 ISYS Capture 0: buffer 2
> [ 99.540642] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: get buffer list 000000004ce07493, 1 buffers
> [ 99.540643] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: -----------------------------------------------------
> [ 99.540643] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: IPU6_FW_ISYS_FRAME_BUFF_SET
> [ 99.540644] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: output_pin[0]:
> [ 99.540644] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: .out_buf_id = 3
> [ 99.540645] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: .addr = 0xfc25e000
> [ 99.540645] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: .compress = 0
> [ 99.540646] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: send_irq_sof = 0x1
> [ 99.540646] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: send_irq_eof = 0x0
> [ 99.540647] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: send_resp_sof = 0x1
> [ 99.540647] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: send_resp_eof = 0x0
> [ 99.540648] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: send_irq_capture_ack = 0x0
> [ 99.540648] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: send_irq_capture_done = 0x0
> [ 99.540649] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: send_resp_capture_ack = 0x1
> [ 99.540649] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: send_resp_capture_done = 0x1
> [ 99.540650] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: -----------------------------------------------------
> [ 99.540650] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: queue buf list 000000004ce07493 flags 2, s 0, 1 bufs
> [ 99.540651] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: send_token: STREAM_CAPTURE
> [ 129.206871] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: proxy send: req_id 0x2, index 2, offset 0x0, value 0x0
> [ 129.206992] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: Proxy response: id 2, error 0, details 0
> [ 129.206994] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: ltr: value 20 scale 2, did: value 20 scale 2
> [ 129.206996] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: proxy send: req_id 0x0, index 0, offset 0x0, value 0x60
> [ 129.207111] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: Proxy response: id 0, error 0, details 0
> [ 129.207112] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: set stream: 0
> [ 129.207114] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: send_token: STREAM_FLUSH
> [ 131.218345] intel_ipu6_isys.isys intel_ipu6.isys.40: stream stop time out
> [ 131.218355] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: stream off entity Intel IPU6 CSI2 0 pad:1 mask:0x1
> [ 131.218360] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: stream off CSI2-0 with 0 lanes
> [ 131.218365] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: Powerdown phy 0 with 0 lanes
> [ 131.218366] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: Reset phy 0
> [ 131.218368] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x23803c = data 0x0
> [ 131.218370] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x238038 = data 0x0
> [ 131.218372] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x238048 = data 0x0
> [ 131.218373] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: write: reg 0x23804c = data 0x2
> [ 131.230800] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: send_token: STREAM_CLOSE
> [ 133.234293] intel_ipu6_isys.isys intel_ipu6.isys.40: stream close time out
> [ 133.234860] [3250] intel_ipu6_isys.isys intel_ipu6.isys.40: ltr: value 1023 scale 5, did: value 1023 scale 2
>
> commands used:
> duane@DuanesSpectre16:~/cameratest$ LIBCAMERA_LOG_LEVELS=0 cam --list
> [0:01:00.127809741] [3023] DEBUG IPAModule ipa_module.cpp:333 ipa_ipu3.so: IPA module /usr/local/lib/x86_64-linux-gnu/libcamera/ipa_ipu3.so is signed
> [0:01:00.127903437] [3023] DEBUG IPAManager ipa_manager.cpp:235 Loaded IPA module '/usr/local/lib/x86_64-linux-gnu/libcamera/ipa_ipu3.so'
> [0:01:00.128777972] [3023] DEBUG IPAModule ipa_module.cpp:333 ipa_soft_simple.so: IPA module /usr/local/lib/x86_64-linux-gnu/libcamera/ipa_soft_simple.so is signed
> [0:01:00.128801351] [3023] DEBUG IPAManager ipa_manager.cpp:235 Loaded IPA module '/usr/local/lib/x86_64-linux-gnu/libcamera/ipa_soft_simple.so'
> [0:01:00.128857996] [3023] INFO Camera camera_manager.cpp:327 libcamera v0.3.2+240-936a099e
> [0:01:00.129250973] [3028] DEBUG Camera camera_manager.cpp:73 Starting camera manager
> [0:01:00.135763362] [3028] DEBUG DeviceEnumerator device_enumerator.cpp:230 New media device "intel-ipu6" created from /dev/media0
> [0:01:00.137019976] [3028] DEBUG DeviceEnumerator device_enumerator_udev.cpp:96 Defer media device /dev/media0 due to 1 missing dependencies
> [0:01:00.137130506] [3028] DEBUG DeviceEnumerator device_enumerator_udev.cpp:322 All dependencies for media device /dev/media0 found
> [0:01:00.137137056] [3028] DEBUG DeviceEnumerator device_enumerator.cpp:258 Added device /dev/media0: intel-ipu6
> [0:01:00.137332647] [3028] DEBUG Camera camera_manager.cpp:140 Found registered pipeline handler 'ipu3'
> [0:01:00.137475248] [3028] DEBUG Camera camera_manager.cpp:140 Found registered pipeline handler 'simple'
> [0:01:00.137501432] [3028] DEBUG DeviceEnumerator device_enumerator.cpp:318 Successful match for media device "intel-ipu6"
> [0:01:00.137545282] [3028] DEBUG SimplePipeline simple.cpp:1585 Sensor found for /dev/media0
> [0:01:00.137847865] [3028] DEBUG SimplePipeline simple.cpp:424 Found capture device Intel IPU6 ISYS Capture 0
> [0:01:00.137908838] [3028] DEBUG V4L2 v4l2_device.cpp:699 'ov08x40 4-0036': Control: Exposure (0x00980911)
> [0:01:00.137996723] [3028] DEBUG V4L2 v4l2_device.cpp:699 'ov08x40 4-0036': Control: Horizontal Flip (0x00980914)
> [0:01:00.138014325] [3028] DEBUG V4L2 v4l2_device.cpp:699 'ov08x40 4-0036': Control: Vertical Flip (0x00980915)
> [0:01:00.138025715] [3028] DEBUG V4L2 v4l2_device.cpp:699 'ov08x40 4-0036': Control: Camera Orientation (0x009a0922)
> [0:01:00.138060218] [3028] DEBUG V4L2 v4l2_device.cpp:699 'ov08x40 4-0036': Control: Camera Sensor Rotation (0x009a0923)
> [0:01:00.138069845] [3028] DEBUG V4L2 v4l2_device.cpp:699 'ov08x40 4-0036': Control: Vertical Blanking (0x009e0901)
> [0:01:00.138076758] [3028] DEBUG V4L2 v4l2_device.cpp:699 'ov08x40 4-0036': Control: Horizontal Blanking (0x009e0902)
> [0:01:00.138084285] [3028] DEBUG V4L2 v4l2_device.cpp:699 'ov08x40 4-0036': Control: Analogue Gain (0x009e0903)
> [0:01:00.138091671] [3028] DEBUG V4L2 v4l2_device.cpp:699 'ov08x40 4-0036': Control: Link Frequency (0x009f0901)
> [0:01:00.138100260] [3028] DEBUG V4L2 v4l2_device.cpp:699 'ov08x40 4-0036': Control: Pixel Rate (0x009f0902)
> [0:01:00.138108355] [3028] DEBUG V4L2 v4l2_device.cpp:699 'ov08x40 4-0036': Control: Test Pattern (0x009f0903)
> [0:01:00.138118912] [3028] DEBUG V4L2 v4l2_device.cpp:699 'ov08x40 4-0036': Control: Digital Gain (0x009f0905)
> [0:01:00.138347429] [3028] ERROR V4L2 v4l2_subdevice.cpp:1127 'ov08x40 4-0036': Unable to get rectangle 2 on pad 0/0: Inappropriate ioctl for device
> [0:01:00.138361971] [3028] WARN CameraSensor camera_sensor_legacy.cpp:401 'ov08x40 4-0036': The PixelArraySize property has been defaulted to 3856x2416
> [0:01:00.138368072] [3028] ERROR V4L2 v4l2_subdevice.cpp:1127 'ov08x40 4-0036': Unable to get rectangle 1 on pad 0/0: Inappropriate ioctl for device
> [0:01:00.138373361] [3028] WARN CameraSensor camera_sensor_legacy.cpp:412 'ov08x40 4-0036': The PixelArrayActiveAreas property has been defaulted to (0, 0)/3856x2416
> [0:01:00.138380560] [3028] ERROR V4L2 v4l2_subdevice.cpp:1127 'ov08x40 4-0036': Unable to get rectangle 0 on pad 0/0: Inappropriate ioctl for device
> [0:01:00.138384660] [3028] WARN CameraSensor camera_sensor_legacy.cpp:420 'ov08x40 4-0036': Failed to retrieve the sensor crop rectangle
> [0:01:00.138388671] [3028] WARN CameraSensor camera_sensor_legacy.cpp:426 'ov08x40 4-0036': The sensor kernel driver needs to be fixed
> [0:01:00.138392375] [3028] WARN CameraSensor camera_sensor_legacy.cpp:428 'ov08x40 4-0036': See Documentation/sensor_driver_requirements.rst in the libcamera sources for more information
> [0:01:00.139127809] [3028] WARN CameraSensorProperties camera_sensor_properties.cpp:458 No static properties available for 'ov08x40'
> [0:01:00.139137730] [3028] WARN CameraSensorProperties camera_sensor_properties.cpp:460 Please consider updating the camera sensor properties database
> [0:01:00.139181797] [3028] DEBUG CameraSensor camera_sensor.cpp:401 Entity 'ov08x40 4-0036' matched by CameraSensorLegacy
> [0:01:00.139213350] [3028] DEBUG SimplePipeline simple.cpp:491 Found pipeline: [ov08x40 4-0036|0] -> [0|Intel IPU6 CSI2 0|1] -> [0|Intel IPU6 ISYS Capture 0]
> [0:01:00.139337139] [3028] DEBUG V4L2 v4l2_device.cpp:699 'ov08x40 4-0036': Control: Exposure (0x00980911)
> [0:01:00.139355680] [3028] DEBUG V4L2 v4l2_device.cpp:699 'ov08x40 4-0036': Control: Horizontal Flip (0x00980914)
> [0:01:00.139364360] [3028] DEBUG V4L2 v4l2_device.cpp:699 'ov08x40 4-0036': Control: Vertical Flip (0x00980915)
> [0:01:00.139372116] [3028] DEBUG V4L2 v4l2_device.cpp:699 'ov08x40 4-0036': Control: Camera Orientation (0x009a0922)
> [0:01:00.139383321] [3028] DEBUG V4L2 v4l2_device.cpp:699 'ov08x40 4-0036': Control: Camera Sensor Rotation (0x009a0923)
> [0:01:00.139391325] [3028] DEBUG V4L2 v4l2_device.cpp:699 'ov08x40 4-0036': Control: Vertical Blanking (0x009e0901)
> [0:01:00.139398521] [3028] DEBUG V4L2 v4l2_device.cpp:699 'ov08x40 4-0036': Control: Horizontal Blanking (0x009e0902)
> [0:01:00.139405723] [3028] DEBUG V4L2 v4l2_device.cpp:699 'ov08x40 4-0036': Control: Analogue Gain (0x009e0903)
> [0:01:00.139412986] [3028] DEBUG V4L2 v4l2_device.cpp:699 'ov08x40 4-0036': Control: Link Frequency (0x009f0901)
> [0:01:00.139421946] [3028] DEBUG V4L2 v4l2_device.cpp:699 'ov08x40 4-0036': Control: Pixel Rate (0x009f0902)
> [0:01:00.139428916] [3028] DEBUG V4L2 v4l2_device.cpp:699 'ov08x40 4-0036': Control: Test Pattern (0x009f0903)
> [0:01:00.139439336] [3028] DEBUG V4L2 v4l2_device.cpp:699 'ov08x40 4-0036': Control: Digital Gain (0x009f0905)
> [0:01:00.139492204] [3028] DEBUG V4L2 v4l2_videodevice.cpp:631 /dev/video0[16:cap]: Opened device : isys: ipu6
> [0:01:00.139624271] [3028] DEBUG DmaBufAllocator dma_buf_allocator.cpp:106 Failed to open /dev/dma_heap/linux,cma: No such file or directory
> [0:01:00.139632204] [3028] DEBUG DmaBufAllocator dma_buf_allocator.cpp:106 Failed to open /dev/dma_heap/reserved: No such file or directory
> [0:01:00.139638709] [3028] DEBUG DmaBufAllocator dma_buf_allocator.cpp:112 Using /dev/dma_heap/system
> [0:01:00.142523463] [3028] DEBUG IPAManager ipa_manager.cpp:306 IPA module /usr/local/lib/x86_64-linux-gnu/libcamera/ipa_soft_simple.so signature is valid
> [0:01:00.142613079] [3028] DEBUG IPAProxy soft_ipa_proxy.cpp:45 initializing soft proxy: loading IPA from /usr/local/lib/x86_64-linux-gnu/libcamera/ipa_soft_simple.so
> [0:01:00.143711843] [3028] WARN IPAProxy ipa_proxy.cpp:160 Configuration file 'ov08x40.yaml' not found for IPA module 'simple', falling back to 'uncalibrated.yaml'
> [0:01:00.143770501] [3028] WARN IPASoft soft_simple.cpp:96 IPASoft: Failed to create camera sensor helper for ov08x40
> [0:01:00.144024361] [3028] DEBUG IPASoft soft_simple.cpp:117 IPASoft: Tuning file version 1
> [0:01:00.144117448] [3028] DEBUG IPAModuleAlgo module.h:91 IPASoft: Instantiated algorithm 'BlackLevel'
> [0:01:00.144182636] [3028] DEBUG IPAModuleAlgo module.h:91 IPASoft: Instantiated algorithm 'Awb'
> [0:01:00.144235165] [3028] DEBUG IPAModuleAlgo module.h:91 IPASoft: Instantiated algorithm 'Lut'
> [0:01:00.144266348] [3028] DEBUG IPAModuleAlgo module.h:91 IPASoft: Instantiated algorithm 'Agc'
> [0:01:00.144357246] [3028] DEBUG MediaDevice media_device.cpp:826 /dev/media0[intel-ipu6]: 'Intel IPU6 CSI2 0'[1] -> 'Intel IPU6 ISYS Capture 0'[0]: 1
> [0:01:00.144432420] [3028] DEBUG SimplePipeline simple.cpp:780 Link 'ov08x40 4-0036'[0] -> 'Intel IPU6 CSI2 0'[0]: configured with format 1928x1208-SGRBG10_1X10
> [0:01:00.144448082] [3028] DEBUG SimplePipeline simple.cpp:780 Link 'Intel IPU6 CSI2 0'[1] -> 'Intel IPU6 ISYS Capture 0'[0]: configured with format 1928x1208-SGRBG10_1X10
> [0:01:00.144496953] [3028] DEBUG SimplePipeline simple.cpp:631 Adding configuration for 1928x1208 in pixel formats [ BA10, pgAA ]
> [0:01:00.144586450] [3028] DEBUG SimplePipeline simple.cpp:780 Link 'ov08x40 4-0036'[0] -> 'Intel IPU6 CSI2 0'[0]: configured with format 3856x2416-SGRBG10_1X10
> [0:01:00.144593355] [3028] DEBUG SimplePipeline simple.cpp:780 Link 'Intel IPU6 CSI2 0'[1] -> 'Intel IPU6 ISYS Capture 0'[0]: configured with format 3856x2416-SGRBG10_1X10
> [0:01:00.144603256] [3028] DEBUG SimplePipeline simple.cpp:631 Adding configuration for 3856x2416 in pixel formats [ BA10, pgAA ]
> [0:01:00.144793338] [3028] DEBUG Camera camera_manager.cpp:161 Pipeline handler "simple" matched
> [0:01:00.144812812] [3028] DEBUG Camera camera_manager.cpp:140 Found registered pipeline handler 'uvcvideo'
> Available cameras:
> 1: Internal front camera (\_SB_.PC00.LNK0)
> duane@DuanesSpectre16:~/cameratest$ uname -a
> Linux DuanesSpectre16 6.13.0-rc2-ipu6+ #1 SMP PREEMPT_DYNAMIC Fri Dec 20 20:11:57 CST 2024 x86_64 GNU/Linux
> duane@DuanesSpectre16:~/cameratest$ LIBCAMERA_LOG_LEVELS=0 cam -c"\_SB_.PC00.LNK0" -C1
> [0:01:39.338358149] [3244] DEBUG IPAModule ipa_module.cpp:333 ipa_ipu3.so: IPA module /usr/local/lib/x86_64-linux-gnu/libcamera/ipa_ipu3.so is signed
> [0:01:39.338446395] [3244] DEBUG IPAManager ipa_manager.cpp:235 Loaded IPA module '/usr/local/lib/x86_64-linux-gnu/libcamera/ipa_ipu3.so'
> [0:01:39.338519312] [3244] DEBUG IPAModule ipa_module.cpp:333 ipa_soft_simple.so: IPA module /usr/local/lib/x86_64-linux-gnu/libcamera/ipa_soft_simple.so is signed
> [0:01:39.338536207] [3244] DEBUG IPAManager ipa_manager.cpp:235 Loaded IPA module '/usr/local/lib/x86_64-linux-gnu/libcamera/ipa_soft_simple.so'
> [0:01:39.338579045] [3244] INFO Camera camera_manager.cpp:327 libcamera v0.3.2+240-936a099e
> [0:01:39.338796296] [3250] DEBUG Camera camera_manager.cpp:73 Starting camera manager
> [0:01:39.347181465] [3250] DEBUG DeviceEnumerator device_enumerator.cpp:230 New media device "intel-ipu6" created from /dev/media0
> [0:01:39.349258834] [3250] DEBUG DeviceEnumerator device_enumerator_udev.cpp:96 Defer media device /dev/media0 due to 1 missing dependencies
> [0:01:39.349438272] [3250] DEBUG DeviceEnumerator device_enumerator_udev.cpp:322 All dependencies for media device /dev/media0 found
> [0:01:39.349449028] [3250] DEBUG DeviceEnumerator device_enumerator.cpp:258 Added device /dev/media0: intel-ipu6
> [0:01:39.349801270] [3250] DEBUG Camera camera_manager.cpp:140 Found registered pipeline handler 'ipu3'
> [0:01:39.350033027] [3250] DEBUG Camera camera_manager.cpp:140 Found registered pipeline handler 'simple'
> [0:01:39.350077755] [3250] DEBUG DeviceEnumerator device_enumerator.cpp:318 Successful match for media device "intel-ipu6"
> [0:01:39.350148975] [3250] DEBUG SimplePipeline simple.cpp:1585 Sensor found for /dev/media0
> [0:01:39.350652718] [3250] DEBUG SimplePipeline simple.cpp:424 Found capture device Intel IPU6 ISYS Capture 0
> [0:01:39.350748274] [3250] DEBUG V4L2 v4l2_device.cpp:699 'ov08x40 4-0036': Control: Exposure (0x00980911)
> [0:01:39.350887346] [3250] DEBUG V4L2 v4l2_device.cpp:699 'ov08x40 4-0036': Control: Horizontal Flip (0x00980914)
> [0:01:39.350919311] [3250] DEBUG V4L2 v4l2_device.cpp:699 'ov08x40 4-0036': Control: Vertical Flip (0x00980915)
> [0:01:39.350942062] [3250] DEBUG V4L2 v4l2_device.cpp:699 'ov08x40 4-0036': Control: Camera Orientation (0x009a0922)
> [0:01:39.350998375] [3250] DEBUG V4L2 v4l2_device.cpp:699 'ov08x40 4-0036': Control: Camera Sensor Rotation (0x009a0923)
> [0:01:39.351017830] [3250] DEBUG V4L2 v4l2_device.cpp:699 'ov08x40 4-0036': Control: Vertical Blanking (0x009e0901)
> [0:01:39.351034245] [3250] DEBUG V4L2 v4l2_device.cpp:699 'ov08x40 4-0036': Control: Horizontal Blanking (0x009e0902)
> [0:01:39.351050645] [3250] DEBUG V4L2 v4l2_device.cpp:699 'ov08x40 4-0036': Control: Analogue Gain (0x009e0903)
> [0:01:39.351067852] [3250] DEBUG V4L2 v4l2_device.cpp:699 'ov08x40 4-0036': Control: Link Frequency (0x009f0901)
> [0:01:39.351087179] [3250] DEBUG V4L2 v4l2_device.cpp:699 'ov08x40 4-0036': Control: Pixel Rate (0x009f0902)
> [0:01:39.351104152] [3250] DEBUG V4L2 v4l2_device.cpp:699 'ov08x40 4-0036': Control: Test Pattern (0x009f0903)
> [0:01:39.351126726] [3250] DEBUG V4L2 v4l2_device.cpp:699 'ov08x40 4-0036': Control: Digital Gain (0x009f0905)
> [0:01:39.351485095] [3250] ERROR V4L2 v4l2_subdevice.cpp:1127 'ov08x40 4-0036': Unable to get rectangle 2 on pad 0/0: Inappropriate ioctl for device
> [0:01:39.351504070] [3250] WARN CameraSensor camera_sensor_legacy.cpp:401 'ov08x40 4-0036': The PixelArraySize property has been defaulted to 3856x2416
> [0:01:39.351514382] [3250] ERROR V4L2 v4l2_subdevice.cpp:1127 'ov08x40 4-0036': Unable to get rectangle 1 on pad 0/0: Inappropriate ioctl for device
> [0:01:39.351523752] [3250] WARN CameraSensor camera_sensor_legacy.cpp:412 'ov08x40 4-0036': The PixelArrayActiveAreas property has been defaulted to (0, 0)/3856x2416
> [0:01:39.351537063] [3250] ERROR V4L2 v4l2_subdevice.cpp:1127 'ov08x40 4-0036': Unable to get rectangle 0 on pad 0/0: Inappropriate ioctl for device
> [0:01:39.351545270] [3250] WARN CameraSensor camera_sensor_legacy.cpp:420 'ov08x40 4-0036': Failed to retrieve the sensor crop rectangle
> [0:01:39.351553072] [3250] WARN CameraSensor camera_sensor_legacy.cpp:426 'ov08x40 4-0036': The sensor kernel driver needs to be fixed
> [0:01:39.351560611] [3250] WARN CameraSensor camera_sensor_legacy.cpp:428 'ov08x40 4-0036': See Documentation/sensor_driver_requirements.rst in the libcamera sources for more information
> [0:01:39.352630649] [3250] WARN CameraSensorProperties camera_sensor_properties.cpp:458 No static properties available for 'ov08x40'
> [0:01:39.352642409] [3250] WARN CameraSensorProperties camera_sensor_properties.cpp:460 Please consider updating the camera sensor properties database
> [0:01:39.352686468] [3250] DEBUG CameraSensor camera_sensor.cpp:401 Entity 'ov08x40 4-0036' matched by CameraSensorLegacy
> [0:01:39.352718683] [3250] DEBUG SimplePipeline simple.cpp:491 Found pipeline: [ov08x40 4-0036|0] -> [0|Intel IPU6 CSI2 0|1] -> [0|Intel IPU6 ISYS Capture 0]
> [0:01:39.352841153] [3250] DEBUG V4L2 v4l2_device.cpp:699 'ov08x40 4-0036': Control: Exposure (0x00980911)
> [0:01:39.352860976] [3250] DEBUG V4L2 v4l2_device.cpp:699 'ov08x40 4-0036': Control: Horizontal Flip (0x00980914)
> [0:01:39.352870450] [3250] DEBUG V4L2 v4l2_device.cpp:699 'ov08x40 4-0036': Control: Vertical Flip (0x00980915)
> [0:01:39.352878264] [3250] DEBUG V4L2 v4l2_device.cpp:699 'ov08x40 4-0036': Control: Camera Orientation (0x009a0922)
> [0:01:39.352889764] [3250] DEBUG V4L2 v4l2_device.cpp:699 'ov08x40 4-0036': Control: Camera Sensor Rotation (0x009a0923)
> [0:01:39.352897753] [3250] DEBUG V4L2 v4l2_device.cpp:699 'ov08x40 4-0036': Control: Vertical Blanking (0x009e0901)
> [0:01:39.352905094] [3250] DEBUG V4L2 v4l2_device.cpp:699 'ov08x40 4-0036': Control: Horizontal Blanking (0x009e0902)
> [0:01:39.352912294] [3250] DEBUG V4L2 v4l2_device.cpp:699 'ov08x40 4-0036': Control: Analogue Gain (0x009e0903)
> [0:01:39.352919984] [3250] DEBUG V4L2 v4l2_device.cpp:699 'ov08x40 4-0036': Control: Link Frequency (0x009f0901)
> [0:01:39.352929276] [3250] DEBUG V4L2 v4l2_device.cpp:699 'ov08x40 4-0036': Control: Pixel Rate (0x009f0902)
> [0:01:39.352936506] [3250] DEBUG V4L2 v4l2_device.cpp:699 'ov08x40 4-0036': Control: Test Pattern (0x009f0903)
> [0:01:39.352946945] [3250] DEBUG V4L2 v4l2_device.cpp:699 'ov08x40 4-0036': Control: Digital Gain (0x009f0905)
> [0:01:39.352992410] [3250] DEBUG V4L2 v4l2_videodevice.cpp:631 /dev/video0[16:cap]: Opened device : isys: ipu6
> [0:01:39.353110612] [3250] DEBUG DmaBufAllocator dma_buf_allocator.cpp:106 Failed to open /dev/dma_heap/linux,cma: No such file or directory
> [0:01:39.353117686] [3250] DEBUG DmaBufAllocator dma_buf_allocator.cpp:106 Failed to open /dev/dma_heap/reserved: No such file or directory
> [0:01:39.353123451] [3250] DEBUG DmaBufAllocator dma_buf_allocator.cpp:112 Using /dev/dma_heap/system
> [0:01:39.355172314] [3250] DEBUG IPAManager ipa_manager.cpp:306 IPA module /usr/local/lib/x86_64-linux-gnu/libcamera/ipa_soft_simple.so signature is valid
> [0:01:39.355249080] [3250] DEBUG IPAProxy soft_ipa_proxy.cpp:45 initializing soft proxy: loading IPA from /usr/local/lib/x86_64-linux-gnu/libcamera/ipa_soft_simple.so
> [0:01:39.355832706] [3250] WARN IPAProxy ipa_proxy.cpp:160 Configuration file 'ov08x40.yaml' not found for IPA module 'simple', falling back to 'uncalibrated.yaml'
> [0:01:39.355876108] [3250] WARN IPASoft soft_simple.cpp:96 IPASoft: Failed to create camera sensor helper for ov08x40
> [0:01:39.356025585] [3250] DEBUG IPASoft soft_simple.cpp:117 IPASoft: Tuning file version 1
> [0:01:39.356104118] [3250] DEBUG IPAModuleAlgo module.h:91 IPASoft: Instantiated algorithm 'BlackLevel'
> [0:01:39.356159486] [3250] DEBUG IPAModuleAlgo module.h:91 IPASoft: Instantiated algorithm 'Awb'
> [0:01:39.356206524] [3250] DEBUG IPAModuleAlgo module.h:91 IPASoft: Instantiated algorithm 'Lut'
> [0:01:39.356233488] [3250] DEBUG IPAModuleAlgo module.h:91 IPASoft: Instantiated algorithm 'Agc'
> [0:01:39.356314755] [3250] DEBUG MediaDevice media_device.cpp:826 /dev/media0[intel-ipu6]: 'Intel IPU6 CSI2 0'[1] -> 'Intel IPU6 ISYS Capture 0'[0]: 0
> [0:01:39.356323447] [3250] DEBUG MediaDevice media_device.cpp:826 /dev/media0[intel-ipu6]: 'Intel IPU6 CSI2 0'[1] -> 'Intel IPU6 ISYS Capture 0'[0]: 1
> [0:01:39.356387717] [3250] DEBUG SimplePipeline simple.cpp:780 Link 'ov08x40 4-0036'[0] -> 'Intel IPU6 CSI2 0'[0]: configured with format 1928x1208-SGRBG10_1X10
> [0:01:39.356400631] [3250] DEBUG SimplePipeline simple.cpp:780 Link 'Intel IPU6 CSI2 0'[1] -> 'Intel IPU6 ISYS Capture 0'[0]: configured with format 1928x1208-SGRBG10_1X10
> [0:01:39.356442117] [3250] DEBUG SimplePipeline simple.cpp:631 Adding configuration for 1928x1208 in pixel formats [ BA10, pgAA ]
> [0:01:39.356521011] [3250] DEBUG SimplePipeline simple.cpp:780 Link 'ov08x40 4-0036'[0] -> 'Intel IPU6 CSI2 0'[0]: configured with format 3856x2416-SGRBG10_1X10
> [0:01:39.356527168] [3250] DEBUG SimplePipeline simple.cpp:780 Link 'Intel IPU6 CSI2 0'[1] -> 'Intel IPU6 ISYS Capture 0'[0]: configured with format 3856x2416-SGRBG10_1X10
> [0:01:39.356536763] [3250] DEBUG SimplePipeline simple.cpp:631 Adding configuration for 3856x2416 in pixel formats [ BA10, pgAA ]
> [0:01:39.356705877] [3250] DEBUG Camera camera_manager.cpp:161 Pipeline handler "simple" matched
> [0:01:39.356724564] [3250] DEBUG Camera camera_manager.cpp:140 Found registered pipeline handler 'uvcvideo'
> [0:01:39.356940157] [3244] DEBUG SimplePipeline simple.cpp:1017 Largest stream size is 3848x2416
> [0:01:39.356958396] [3244] DEBUG SimplePipeline simple.cpp:1069 Picked 3856x2416-SGRBG10_1X10 -> 3856x2416-SGRBG10 for max stream size 3848x2416
> [0:01:39.356991452] [3244] DEBUG Camera camera.cpp:1137 streams configuration: (0) 3848x2416-ABGR8888
> [0:01:39.357003420] [3244] DEBUG SimplePipeline simple.cpp:1017 Largest stream size is 3848x2416
> [0:01:39.357007631] [3244] DEBUG SimplePipeline simple.cpp:1069 Picked 3856x2416-SGRBG10_1X10 -> 3856x2416-SGRBG10 for max stream size 3848x2416
> Using camera \_SB_.PC00.LNK0 as cam0
> [0:01:39.357029465] [3244] DEBUG SimplePipeline simple.cpp:1017 Largest stream size is 3848x2416
> [0:01:39.357033783] [3244] DEBUG SimplePipeline simple.cpp:1069 Picked 3856x2416-SGRBG10_1X10 -> 3856x2416-SGRBG10 for max stream size 3848x2416
> [0:01:39.357040553] [3244] INFO Camera camera.cpp:1202 configuring streams: (0) 3848x2416-ABGR8888
> [0:01:39.357071265] [3250] DEBUG MediaDevice media_device.cpp:826 /dev/media0[intel-ipu6]: 'Intel IPU6 CSI2 0'[1] -> 'Intel IPU6 ISYS Capture 0'[0]: 0
> [0:01:39.357078616] [3250] DEBUG MediaDevice media_device.cpp:826 /dev/media0[intel-ipu6]: 'Intel IPU6 CSI2 0'[1] -> 'Intel IPU6 ISYS Capture 0'[0]: 1
> [0:01:39.357121732] [3250] DEBUG SimplePipeline simple.cpp:780 Link 'ov08x40 4-0036'[0] -> 'Intel IPU6 CSI2 0'[0]: configured with format 3856x2416-SGRBG10_1X10
> [0:01:39.357128960] [3250] DEBUG SimplePipeline simple.cpp:780 Link 'Intel IPU6 CSI2 0'[1] -> 'Intel IPU6 ISYS Capture 0'[0]: configured with format 3856x2416-SGRBG10_1X10
> [0:01:39.357159258] [3250] WARN CameraSensor camera_sensor_legacy.cpp:501 'ov08x40 4-0036': No sensor delays found in static properties. Assuming unverified defaults.
> [0:01:39.357215453] [3250] DEBUG DelayedControls delayed_controls.cpp:99 Set a delay of 2 and priority write flag 0 for Exposure
> [0:01:39.357226982] [3250] DEBUG DelayedControls delayed_controls.cpp:99 Set a delay of 1 and priority write flag 0 for Analogue Gain
> [0:01:39.357329806] [3250] INFO IPASoft soft_simple.cpp:251 IPASoft: Exposure 4-4992, gain 0-1984 (1)
> [0:01:39.360583232] [3250] DEBUG Buffer framebuffer.cpp:351 Buffer is contiguous
> [0:01:39.363720909] [3250] DEBUG Buffer framebuffer.cpp:351 Buffer is contiguous
> [0:01:39.366821221] [3250] DEBUG Buffer framebuffer.cpp:351 Buffer is contiguous
> [0:01:39.369848728] [3250] DEBUG Buffer framebuffer.cpp:351 Buffer is contiguous
> [0:01:39.369997287] [3244] DEBUG Request request.cpp:369 Created request - cookie: 0
> [0:01:39.370102283] [3244] DEBUG Request request.cpp:369 Created request - cookie: 0
> [0:01:39.370111772] [3244] DEBUG Request request.cpp:369 Created request - cookie: 0
> [0:01:39.370118875] [3244] DEBUG Request request.cpp:369 Created request - cookie: 0
> [0:01:39.370126087] [3244] DEBUG Camera camera.cpp:1360 Starting capture
> [0:01:39.374951117] [3250] DEBUG V4L2 v4l2_videodevice.cpp:1311 /dev/video0[16:cap]: 3 buffers requested.
> [0:01:39.374989483] [3250] DEBUG Buffer framebuffer.cpp:351 Buffer is contiguous
> [0:01:39.375000998] [3250] DEBUG Buffer framebuffer.cpp:351 Buffer is contiguous
> [0:01:39.375008719] [3250] DEBUG Buffer framebuffer.cpp:351 Buffer is contiguous
> [0:01:39.375442044] [3250] DEBUG V4L2 v4l2_videodevice.cpp:1750 /dev/video0[16:cap]: Queueing buffer 0
> [0:01:39.534307812] [3250] DEBUG V4L2 v4l2_videodevice.cpp:1750 /dev/video0[16:cap]: Queueing buffer 1
> [0:01:39.534380155] [3250] DEBUG V4L2 v4l2_videodevice.cpp:1750 /dev/video0[16:cap]: Queueing buffer 2
> cam0: Capture 1 frames
> ^CExiting
> [0:02:09.199996813] [3244] DEBUG Camera camera.cpp:1404 Stopping capture
> [0:02:13.229026130] [3250] DEBUG Request request.cpp:129 Request(0:C:0/1:0)
> [0:02:13.229140205] [3250] DEBUG V4L2 v4l2_videodevice.cpp:1596 /dev/video0[16:cap]: Releasing buffers
> [0:02:13.229186821] [3250] DEBUG V4L2 v4l2_videodevice.cpp:1311 /dev/video0[16:cap]: 0 buffers requested.
>
> Please let me know what further testing I can do.
>
> Sincerely,
> Duane
>
From dc2039fc5a3ebcb53cfe5ecf1b0b784e06bc447c Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@xxxxxxxxxx>
Date: Wed, 20 Nov 2024 10:54:14 +0100
Subject: [PATCH] media: ov08x40: Increase post reset deassert delay to 25 ms
Some ACPI platforms have some additional logic attached to the reset
GPIO requiring a post reset deassert delay of 25 ms.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
drivers/media/i2c/ov08x40.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/i2c/ov08x40.c b/drivers/media/i2c/ov08x40.c
index cf3b6d506933..489852d3114f 100644
--- a/drivers/media/i2c/ov08x40.c
+++ b/drivers/media/i2c/ov08x40.c
@@ -1326,7 +1326,7 @@ static int ov08x40_power_on(struct device *dev)
}
gpiod_set_value_cansleep(ov08x->reset_gpio, 0);
- usleep_range(1500, 1800);
+ msleep(25);
return 0;
--
2.47.0
From d7c9047213972eccbdd81e1bd881b155943c2e42 Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@xxxxxxxxxx>
Date: Fri, 25 Oct 2024 11:29:22 +0200
Subject: [PATCH 22/22] media: ov08x40: HACK disable 3856x2416 mode
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
drivers/media/i2c/ov08x40.c | 15 ---------------
1 file changed, 15 deletions(-)
diff --git a/drivers/media/i2c/ov08x40.c b/drivers/media/i2c/ov08x40.c
index b6e69e0c2ecf..cf3b6d506933 100644
--- a/drivers/media/i2c/ov08x40.c
+++ b/drivers/media/i2c/ov08x40.c
@@ -1250,21 +1250,6 @@ static const struct ov08x40_link_freq_config link_freq_configs[] = {
/* Mode configs */
static const struct ov08x40_mode supported_modes[] = {
- {
- .width = 3856,
- .height = 2416,
- .vts_def = OV08X40_VTS_30FPS,
- .vts_min = OV08X40_VTS_30FPS,
- .llp = 0x10aa, /* in normal mode, tline time = 2 * HTS / SCLK */
- .lanes = 4,
- .reg_list = {
- .num_of_regs = ARRAY_SIZE(mode_3856x2416_regs),
- .regs = mode_3856x2416_regs,
- },
- .link_freq_index = OV08X40_LINK_FREQ_400MHZ_INDEX,
- .exposure_shift = 1,
- .exposure_margin = OV08X40_EXPOSURE_MAX_MARGIN,
- },
{
.width = 1928,
.height = 1208,
--
2.47.0
