From: André Apitzsch <git@xxxxxxxxxxx> The driver should disable or unprepare the clock on probe error and on removing the module. Remove regulator_bulk_disable(), because it is called by imx214_power_off(). Acked-by: Ricardo Ribalda <ribalda@xxxxxxxxxxxx> Signed-off-by: André Apitzsch <git@xxxxxxxxxxx> --- drivers/media/i2c/imx214.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/media/i2c/imx214.c b/drivers/media/i2c/imx214.c index 96d05acfeb66480770bb6291027dd023fdccb649..e8d35f8b0f8b57d64f03ff6f5ed9eac51a671e8e 100644 --- a/drivers/media/i2c/imx214.c +++ b/drivers/media/i2c/imx214.c @@ -1340,7 +1340,7 @@ static int imx214_probe(struct i2c_client *client) v4l2_ctrl_handler_free(&imx214->ctrls); error_power_off: pm_runtime_disable(imx214->dev); - regulator_bulk_disable(IMX214_NUM_SUPPLIES, imx214->supplies); + imx214_power_off(dev); return ret; } @@ -1356,6 +1356,8 @@ static void imx214_remove(struct i2c_client *client) v4l2_ctrl_handler_free(&imx214->ctrls); pm_runtime_disable(&client->dev); + if (!pm_runtime_status_suspended(&client->dev)) + imx214_power_off(&client->dev); pm_runtime_set_suspended(&client->dev); } -- 2.47.1
