All ov08x40_check_hwcfg() error-exit paths already log a detailed reason,
logging a second generic "failed to check hwcfg" error is not useful, and
in case of the fwnode check failing with -EPROBE_DEFER this is outright
problematic flooding the log with:
[ 4.557059] ov08x40 i2c-OVTI08F4:00: failed to check hwcfg: -517
[ 4.559636] ov08x40 i2c-OVTI08F4:00: failed to check hwcfg: -517
etc.
messages.
The one exception to all ov08x40_check_hwcfg() error-exit paths already
logging an error is on v4l2_fwnode_endpoint_alloc_parse() errors.
Make ov08x40_check_hwcfg() log an error in that case too and drop
the duplicate "failed to check hwcfg: %d\n" error logging.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
drivers/media/i2c/ov08x40.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/media/i2c/ov08x40.c b/drivers/media/i2c/ov08x40.c
index b2af533bac0a..793246f4013e 100644
--- a/drivers/media/i2c/ov08x40.c
+++ b/drivers/media/i2c/ov08x40.c
@@ -2164,7 +2164,7 @@ static int ov08x40_check_hwcfg(struct ov08x40 *ov08x, struct device *dev)
ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg);
fwnode_handle_put(ep);
if (ret)
- return ret;
+ return dev_err_probe(dev, ret, "parsing endpoint failed\n");
ov08x->reset_gpio = devm_gpiod_get_optional(dev, "reset",
GPIOD_OUT_LOW);
@@ -2251,10 +2251,8 @@ static int ov08x40_probe(struct i2c_client *client)
/* Check HW config */
ret = ov08x40_check_hwcfg(ov08x, &client->dev);
- if (ret) {
- dev_err(&client->dev, "failed to check hwcfg: %d\n", ret);
+ if (ret)
return ret;
- }
/* Initialize subdev */
v4l2_i2c_subdev_init(&ov08x->sd, client, &ov08x40_subdev_ops);
--
2.47.1
