ov08x40_identify_module() already logs an error if the read ID mismatches,
so having its caller also log an error results in 2 errors in this case.
Add error logging to the ID register read in ov08x40_identify_module() and
drop the error logging in the caller.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
drivers/media/i2c/ov08x40.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/media/i2c/ov08x40.c b/drivers/media/i2c/ov08x40.c
index 44989a37c2f3..ca004343a9d8 100644
--- a/drivers/media/i2c/ov08x40.c
+++ b/drivers/media/i2c/ov08x40.c
@@ -1943,8 +1943,10 @@ static int ov08x40_identify_module(struct ov08x40 *ov08x)
ret = ov08x40_read_reg(ov08x, OV08X40_REG_CHIP_ID,
OV08X40_REG_VALUE_24BIT, &val);
- if (ret)
+ if (ret) {
+ dev_err(&client->dev, "error reading chip-id register: %d\n", ret);
return ret;
+ }
if (val != OV08X40_CHIP_ID) {
dev_err(&client->dev, "chip id mismatch: %x!=%x\n",
@@ -2262,10 +2264,8 @@ static int ov08x40_probe(struct i2c_client *client)
/* Check module identity */
ret = ov08x40_identify_module(ov08x);
- if (ret) {
- dev_err(&client->dev, "failed to find sensor: %d\n", ret);
+ if (ret)
goto probe_power_off;
- }
}
/* Set default mode to max resolution */
--
2.47.1
