ACPI platforms might also have a reset GPIO and regulators, move the code
to get these outside of the if (!is_acpi_node(fwnode)) check.
This also removes the is_acpi_node(fwnode) checks from ov08x40_power_on() /
ov08x40_power_off() both the GPIO hand the clk frameworks functions used
there will happily accept the NULL pointer returned from the optional get()
functions when there is no reset GPIO / no clk.
While moving the code around also at error logging to the error exit
path for getting the reset GPIO.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
drivers/media/i2c/ov08x40.c | 38 ++++++++++++++++---------------------
1 file changed, 16 insertions(+), 22 deletions(-)
diff --git a/drivers/media/i2c/ov08x40.c b/drivers/media/i2c/ov08x40.c
index e4046d4705c3..8b1380506778 100644
--- a/drivers/media/i2c/ov08x40.c
+++ b/drivers/media/i2c/ov08x40.c
@@ -1322,9 +1322,6 @@ static int ov08x40_power_on(struct device *dev)
struct ov08x40 *ov08x = to_ov08x40(sd);
int ret;
- if (is_acpi_node(dev_fwnode(dev)))
- return 0;
-
ret = clk_prepare_enable(ov08x->xvclk);
if (ret < 0) {
dev_err(dev, "failed to enable xvclk\n");
@@ -1360,9 +1357,6 @@ static int ov08x40_power_off(struct device *dev)
struct v4l2_subdev *sd = dev_get_drvdata(dev);
struct ov08x40 *ov08x = to_ov08x40(sd);
- if (is_acpi_node(dev_fwnode(dev)))
- return 0;
-
gpiod_set_value_cansleep(ov08x->reset_gpio, 1);
regulator_bulk_disable(ARRAY_SIZE(ov08x40_supply_names),
ov08x->supplies);
@@ -2165,6 +2159,22 @@ static int ov08x40_check_hwcfg(struct ov08x40 *ov08x, struct device *dev)
if (ret)
return ret;
+ ov08x->reset_gpio = devm_gpiod_get_optional(dev, "reset",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(ov08x->reset_gpio)) {
+ ret = dev_err_probe(dev, PTR_ERR(ov08x->reset_gpio),
+ "getting reset GPIO\n");
+ goto out_err;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(ov08x40_supply_names); i++)
+ ov08x->supplies[i].supply = ov08x40_supply_names[i];
+
+ ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ov08x40_supply_names),
+ ov08x->supplies);
+ if (ret)
+ goto out_err;
+
if (!is_acpi_node(fwnode)) {
ov08x->xvclk = devm_clk_get(dev, NULL);
if (IS_ERR(ov08x->xvclk)) {
@@ -2175,22 +2185,6 @@ static int ov08x40_check_hwcfg(struct ov08x40 *ov08x, struct device *dev)
}
xvclk_rate = clk_get_rate(ov08x->xvclk);
-
- ov08x->reset_gpio = devm_gpiod_get_optional(dev, "reset",
- GPIOD_OUT_LOW);
- if (IS_ERR(ov08x->reset_gpio)) {
- ret = PTR_ERR(ov08x->reset_gpio);
- goto out_err;
- }
-
- for (i = 0; i < ARRAY_SIZE(ov08x40_supply_names); i++)
- ov08x->supplies[i].supply = ov08x40_supply_names[i];
-
- ret = devm_regulator_bulk_get(dev,
- ARRAY_SIZE(ov08x40_supply_names),
- ov08x->supplies);
- if (ret)
- goto out_err;
} else {
ret = fwnode_property_read_u32(dev_fwnode(dev), "clock-frequency",
&xvclk_rate);
--
2.47.1
