[PATCH v6 2/4] media: venus: pm_helpers: use opp-table for the frequency

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The frequency value in the opp-table in the device tree and the freq_tbl
in the driver are the same.

Therefore, update pm_helpers.c to use the opp-table for frequency values
for the v4 core.
If getting data from the opp table fails, fall back to using the frequency
table.

Signed-off-by: Renjiang Han <quic_renjiang@xxxxxxxxxxx>
---
 drivers/media/platform/qcom/venus/pm_helpers.c | 53 +++++++++++++++++++-------
 1 file changed, 39 insertions(+), 14 deletions(-)

diff --git a/drivers/media/platform/qcom/venus/pm_helpers.c b/drivers/media/platform/qcom/venus/pm_helpers.c
index 33a5a659c0ada0ca97eebb5522c5f349f95c49c7..b61c0ad152878870b7223efa274e137d3636433b 100644
--- a/drivers/media/platform/qcom/venus/pm_helpers.c
+++ b/drivers/media/platform/qcom/venus/pm_helpers.c
@@ -43,14 +43,20 @@ static int core_clks_enable(struct venus_core *core)
 	const struct venus_resources *res = core->res;
 	const struct freq_tbl *freq_tbl = core->res->freq_tbl;
 	unsigned int freq_tbl_size = core->res->freq_tbl_size;
+	struct device *dev = core->dev;
+	struct dev_pm_opp *opp;
 	unsigned long freq;
 	unsigned int i;
 	int ret;
 
-	if (!freq_tbl)
-		return -EINVAL;
-
-	freq = freq_tbl[freq_tbl_size - 1].freq;
+	opp = dev_pm_opp_find_freq_ceil(dev, &freq);
+	if (IS_ERR(opp)) {
+		if (!freq_tbl)
+			return -EINVAL;
+		freq = freq_tbl[freq_tbl_size - 1].freq;
+	} else {
+		dev_pm_opp_put(opp);
+	}
 
 	for (i = 0; i < res->clks_num; i++) {
 		if (IS_V6(core)) {
@@ -627,12 +633,15 @@ min_loaded_core(struct venus_inst *inst, u32 *min_coreid, u32 *min_load, bool lo
 
 static int decide_core(struct venus_inst *inst)
 {
+	const struct freq_tbl *freq_tbl = inst->core->res->freq_tbl;
 	const u32 ptype = HFI_PROPERTY_CONFIG_VIDEOCORES_USAGE;
 	struct venus_core *core = inst->core;
 	u32 min_coreid, min_load, cur_inst_load;
 	u32 min_lp_coreid, min_lp_load, cur_inst_lp_load;
 	struct hfi_videocores_usage_type cu;
-	unsigned long max_freq;
+	unsigned long max_freq = ULONG_MAX;
+	struct device *dev = core->dev;
+	struct dev_pm_opp *opp;
 	int ret = 0;
 
 	if (legacy_binding) {
@@ -655,7 +664,11 @@ static int decide_core(struct venus_inst *inst)
 	cur_inst_lp_load *= inst->clk_data.low_power_freq;
 	/*TODO : divide this inst->load by work_route */
 
-	max_freq = core->res->freq_tbl[0].freq;
+	opp = dev_pm_opp_find_freq_floor(dev, &max_freq);
+	if (IS_ERR(opp))
+		max_freq = freq_tbl[0].freq;
+	else
+		dev_pm_opp_put(opp);
 
 	min_loaded_core(inst, &min_coreid, &min_load, false);
 	min_loaded_core(inst, &min_lp_coreid, &min_lp_load, true);
@@ -1078,7 +1091,9 @@ static int load_scale_v4(struct venus_inst *inst)
 	unsigned int num_rows = core->res->freq_tbl_size;
 	struct device *dev = core->dev;
 	unsigned long freq = 0, freq_core1 = 0, freq_core2 = 0;
+	unsigned long max_freq = ULONG_MAX;
 	unsigned long filled_len = 0;
+	struct dev_pm_opp *opp;
 	int i, ret = 0;
 
 	for (i = 0; i < inst->num_input_bufs; i++)
@@ -1104,19 +1119,29 @@ static int load_scale_v4(struct venus_inst *inst)
 
 	freq = max(freq_core1, freq_core2);
 
-	if (freq > table[0].freq) {
-		dev_dbg(dev, VDBGL "requested clock rate: %lu scaling clock rate : %lu\n",
-			freq, table[0].freq);
+	opp = dev_pm_opp_find_freq_floor(dev, &max_freq);
+	if (IS_ERR(opp))
+		max_freq = table[0].freq;
+	else
+		dev_pm_opp_put(opp);
 
-		freq = table[0].freq;
+	if (freq > max_freq) {
+		dev_dbg(dev, VDBGL "requested clock rate: %lu scaling clock rate : %lu\n",
+			freq, max_freq);
+		freq = max_freq;
 		goto set_freq;
 	}
 
-	for (i = num_rows - 1 ; i >= 0; i--) {
-		if (freq <= table[i].freq) {
-			freq = table[i].freq;
-			break;
+	opp = dev_pm_opp_find_freq_ceil(dev, &freq);
+	if (IS_ERR(opp)) {
+		for (i = num_rows - 1 ; i >= 0; i--) {
+			if (freq <= table[i].freq) {
+				freq = table[i].freq;
+				break;
+			}
 		}
+	} else {
+		dev_pm_opp_put(opp);
 	}
 
 set_freq:

-- 
2.34.1





[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux