Use the reg property instead of text in the description.
Signed-off-by: David Heidelberg <david@xxxxxxx>
---
.../devicetree/bindings/media/i2c/sony,imx283.yaml | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git ./Documentation/devicetree/bindings/media/i2c/sony,imx283.yaml ./Documentation/devicetree/bindings/media/i2c/sony,imx283.yaml
index e4f49f1435a5..f4ee991c89a3 100644
--- ./Documentation/devicetree/bindings/media/i2c/sony,imx283.yaml
+++ ./Documentation/devicetree/bindings/media/i2c/sony,imx283.yaml
@@ -13,16 +13,15 @@ maintainers:
description:
IMX283 sensor is a Sony CMOS active pixel digital image sensor with an active
- array size of 5472H x 3648V. It is programmable through I2C interface. The
- I2C client address is fixed to 0x1a as per sensor data sheet. Image data is
- sent through MIPI CSI-2.
+ array size of 5472H x 3648V. It is programmable through I2C interface.
+ Image data is sent through MIPI CSI-2.
properties:
compatible:
const: sony,imx283
reg:
- maxItems: 1
+ const: 0x1a
clocks:
description: Clock frequency from 6 to 24 MHz.
--
2.45.2
