On 6.12.2024 8:18 PM, Vikram Sharma wrote:
> Add changes to support the camera subsystem on the SC7280.
>
> Signed-off-by: Suresh Vankadara <quic_svankada@xxxxxxxxxxx>
> Signed-off-by: Trishansh Bhardwaj <quic_tbhardwa@xxxxxxxxxxx>
> Signed-off-by: Vikram Sharma <quic_vikramsa@xxxxxxxxxxx>
> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
> Tested-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/sc7280.dtsi | 178 +++++++++++++++++++++++++++
> 1 file changed, 178 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> index 55db1c83ef55..afe7113df4af 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> @@ -4426,6 +4426,184 @@ cci1_i2c1: i2c-bus@1 {
> };
> };
>
> + camss: isp@acb3000 {
> + compatible = "qcom,sc7280-camss";
> +
> + reg = <0x0 0x0acb3000 0x0 0x1000>,
> + <0x0 0x0acba000 0x0 0x1000>,
> + <0x0 0x0acc1000 0x0 0x1000>,
> + <0x0 0x0acc8000 0x0 0x1000>,
> + <0x0 0x0accf000 0x0 0x1000>,
> + <0x0 0x0ace0000 0x0 0x2000>,
> + <0x0 0x0ace2000 0x0 0x2000>,
> + <0x0 0x0ace4000 0x0 0x2000>,
> + <0x0 0x0ace6000 0x0 0x2000>,
> + <0x0 0x0ace8000 0x0 0x2000>,
> + <0x0 0x0acaf000 0x0 0x4000>,
> + <0x0 0x0acb6000 0x0 0x4000>,
> + <0x0 0x0acbd000 0x0 0x4000>,
> + <0x0 0x0acc4000 0x0 0x4000>,
> + <0x0 0x0accb000 0x0 0x4000>;
> + reg-names = "csid0",
> + "csid1",
> + "csid2",
> + "csid_lite0",
> + "csid_lite1",
> + "csiphy0",
> + "csiphy1",
> + "csiphy2",
> + "csiphy3",
> + "csiphy4",
> + "vfe0",
> + "vfe1",
> + "vfe2",
> + "vfe_lite0",
> + "vfe_lite1";
> +
> + clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
> + <&camcc CAM_CC_CPAS_AHB_CLK>,
> + <&camcc CAM_CC_CSIPHY0_CLK>,
> + <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
> + <&camcc CAM_CC_CSIPHY1_CLK>,
> + <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
> + <&camcc CAM_CC_CSIPHY2_CLK>,
> + <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
> + <&camcc CAM_CC_CSIPHY3_CLK>,
> + <&camcc CAM_CC_CSI3PHYTIMER_CLK>,
> + <&camcc CAM_CC_CSIPHY4_CLK>,
> + <&camcc CAM_CC_CSI4PHYTIMER_CLK>,
> + <&gcc GCC_CAMERA_AHB_CLK>,
This one's permanently enabled, you can drop it
> + <&gcc GCC_CAMERA_HF_AXI_CLK>,
Is GCC_CAMERA_SF_AXI_CLK required too?
> + <&camcc CAM_CC_ICP_AHB_CLK>,
> + <&camcc CAM_CC_IFE_0_CLK>,
> + <&camcc CAM_CC_IFE_0_AXI_CLK>,
> + <&camcc CAM_CC_IFE_0_CPHY_RX_CLK>,
> + <&camcc CAM_CC_IFE_0_CSID_CLK>,
> + <&camcc CAM_CC_IFE_1_CLK>,
> + <&camcc CAM_CC_IFE_1_AXI_CLK>,
> + <&camcc CAM_CC_IFE_1_CPHY_RX_CLK>,
> + <&camcc CAM_CC_IFE_1_CSID_CLK>,
> + <&camcc CAM_CC_IFE_2_CLK>,
> + <&camcc CAM_CC_IFE_2_AXI_CLK>,
> + <&camcc CAM_CC_IFE_2_CPHY_RX_CLK>,
> + <&camcc CAM_CC_IFE_2_CSID_CLK>,
> + <&camcc CAM_CC_IFE_LITE_0_CLK>,
> + <&camcc CAM_CC_IFE_LITE_0_CPHY_RX_CLK>,
> + <&camcc CAM_CC_IFE_LITE_0_CSID_CLK>,
> + <&camcc CAM_CC_IFE_LITE_1_CLK>,
> + <&camcc CAM_CC_IFE_LITE_1_CPHY_RX_CLK>,
> + <&camcc CAM_CC_IFE_LITE_1_CSID_CLK>;
> + clock-names = "camnoc_axi",
> + "cpas_ahb",
> + "csiphy0",
> + "csiphy0_timer",
> + "csiphy1",
> + "csiphy1_timer",
> + "csiphy2",
> + "csiphy2_timer",
> + "csiphy3",
> + "csiphy3_timer",
> + "csiphy4",
> + "csiphy4_timer",
> + "gcc_camera_ahb",
> + "gcc_cam_hf_axi",
No other binding calls it that, please use `gcc_axi_hf` for
consistency
Other than that, looks good
Konrad
