Add support for VFE found on SM8550 (Titan 780). This implementation is
based on the titan 480 implementation. It supports the normal and lite
VFE.
Co-developed-by: Yongsheng Li <quic_yon@xxxxxxxxxxx>
Signed-off-by: Yongsheng Li <quic_yon@xxxxxxxxxxx>
Signed-off-by: Depeng Shao <quic_depengs@xxxxxxxxxxx>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
---
drivers/media/platform/qcom/camss/Makefile | 1 +
.../media/platform/qcom/camss/camss-vfe-780.c | 159 ++++++++++++++++++
drivers/media/platform/qcom/camss/camss-vfe.c | 2 +
drivers/media/platform/qcom/camss/camss-vfe.h | 1 +
drivers/media/platform/qcom/camss/camss.c | 121 +++++++++++++
5 files changed, 284 insertions(+)
create mode 100644 drivers/media/platform/qcom/camss/camss-vfe-780.c
diff --git a/drivers/media/platform/qcom/camss/Makefile b/drivers/media/platform/qcom/camss/Makefile
index 9a723e8712a2..f6db5b3b5ace 100644
--- a/drivers/media/platform/qcom/camss/Makefile
+++ b/drivers/media/platform/qcom/camss/Makefile
@@ -17,6 +17,7 @@ qcom-camss-objs += \
camss-vfe-4-8.o \
camss-vfe-17x.o \
camss-vfe-480.o \
+ camss-vfe-780.o \
camss-vfe-gen1.o \
camss-vfe.o \
camss-video.o \
diff --git a/drivers/media/platform/qcom/camss/camss-vfe-780.c b/drivers/media/platform/qcom/camss/camss-vfe-780.c
new file mode 100644
index 000000000000..b9812d70f91b
--- /dev/null
+++ b/drivers/media/platform/qcom/camss/camss-vfe-780.c
@@ -0,0 +1,159 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Qualcomm MSM Camera Subsystem - VFE (Video Front End) Module v780 (SM8550)
+ *
+ * Copyright (c) 2024 Qualcomm Technologies, Inc.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+
+#include "camss.h"
+#include "camss-vfe.h"
+
+#define BUS_REG_BASE (vfe_is_lite(vfe) ? 0x200 : 0xC00)
+
+#define VFE_BUS_WM_CGC_OVERRIDE (BUS_REG_BASE + 0x08)
+#define WM_CGC_OVERRIDE_ALL (0x7FFFFFF)
+
+#define VFE_BUS_WM_TEST_BUS_CTRL (BUS_REG_BASE + 0xDC)
+
+#define VFE_BUS_WM_CFG(n) (BUS_REG_BASE + 0x200 + (n) * 0x100)
+#define WM_CFG_EN BIT(0)
+#define WM_VIR_FRM_EN BIT(1)
+#define WM_CFG_MODE BIT(16)
+#define VFE_BUS_WM_IMAGE_ADDR(n) (BUS_REG_BASE + 0x204 + (n) * 0x100)
+#define VFE_BUS_WM_FRAME_INCR(n) (BUS_REG_BASE + 0x208 + (n) * 0x100)
+#define VFE_BUS_WM_IMAGE_CFG_0(n) (BUS_REG_BASE + 0x20c + (n) * 0x100)
+#define WM_IMAGE_CFG_0_DEFAULT_WIDTH (0xFFFF)
+#define VFE_BUS_WM_IMAGE_CFG_2(n) (BUS_REG_BASE + 0x214 + (n) * 0x100)
+#define WM_IMAGE_CFG_2_DEFAULT_STRIDE (0xFFFF)
+#define VFE_BUS_WM_PACKER_CFG(n) (BUS_REG_BASE + 0x218 + (n) * 0x100)
+
+#define VFE_BUS_WM_IRQ_SUBSAMPLE_PERIOD(n) (BUS_REG_BASE + 0x230 + (n) * 0x100)
+#define VFE_BUS_WM_IRQ_SUBSAMPLE_PATTERN(n) (BUS_REG_BASE + 0x234 + (n) * 0x100)
+#define VFE_BUS_WM_FRAMEDROP_PERIOD(n) (BUS_REG_BASE + 0x238 + (n) * 0x100)
+#define VFE_BUS_WM_FRAMEDROP_PATTERN(n) (BUS_REG_BASE + 0x23c + (n) * 0x100)
+
+#define VFE_BUS_WM_MMU_PREFETCH_CFG(n) (BUS_REG_BASE + 0x260 + (n) * 0x100)
+#define VFE_BUS_WM_MMU_PREFETCH_MAX_OFFSET(n) (BUS_REG_BASE + 0x264 + (n) * 0x100)
+
+/*
+ * Bus client mapping:
+ *
+ * Full VFE:
+ * 23 = RDI0, 24 = RDI1, 25 = RDI2
+ *
+ * VFE LITE:
+ * 0 = RDI0, 1 = RDI1, 2 = RDI3, 4 = RDI4
+ */
+#define RDI_WM(n) ((vfe_is_lite(vfe) ? 0x0 : 0x17) + (n))
+
+static void vfe_wm_start(struct vfe_device *vfe, u8 wm, struct vfe_line *line)
+{
+ struct v4l2_pix_format_mplane *pix =
+ &line->video_out.active_fmt.fmt.pix_mp;
+
+ wm = RDI_WM(wm);
+
+ /* no clock gating at bus input */
+ writel(WM_CGC_OVERRIDE_ALL, vfe->base + VFE_BUS_WM_CGC_OVERRIDE);
+
+ writel(0x0, vfe->base + VFE_BUS_WM_TEST_BUS_CTRL);
+
+ writel(ALIGN(pix->plane_fmt[0].bytesperline, 16) * pix->height >> 8,
+ vfe->base + VFE_BUS_WM_FRAME_INCR(wm));
+ writel((WM_IMAGE_CFG_0_DEFAULT_WIDTH & 0xFFFF),
+ vfe->base + VFE_BUS_WM_IMAGE_CFG_0(wm));
+ writel(WM_IMAGE_CFG_2_DEFAULT_STRIDE,
+ vfe->base + VFE_BUS_WM_IMAGE_CFG_2(wm));
+ writel(0, vfe->base + VFE_BUS_WM_PACKER_CFG(wm));
+
+ /* no dropped frames, one irq per frame */
+ writel(0, vfe->base + VFE_BUS_WM_FRAMEDROP_PERIOD(wm));
+ writel(1, vfe->base + VFE_BUS_WM_FRAMEDROP_PATTERN(wm));
+ writel(0, vfe->base + VFE_BUS_WM_IRQ_SUBSAMPLE_PERIOD(wm));
+ writel(1, vfe->base + VFE_BUS_WM_IRQ_SUBSAMPLE_PATTERN(wm));
+
+ writel(1, vfe->base + VFE_BUS_WM_MMU_PREFETCH_CFG(wm));
+ writel(0xFFFFFFFF, vfe->base + VFE_BUS_WM_MMU_PREFETCH_MAX_OFFSET(wm));
+
+ writel(WM_CFG_EN | WM_CFG_MODE, vfe->base + VFE_BUS_WM_CFG(wm));
+}
+
+static void vfe_wm_stop(struct vfe_device *vfe, u8 wm)
+{
+ wm = RDI_WM(wm);
+ writel(0, vfe->base + VFE_BUS_WM_CFG(wm));
+}
+
+static void vfe_wm_update(struct vfe_device *vfe, u8 wm, u32 addr,
+ struct vfe_line *line)
+{
+ wm = RDI_WM(wm);
+ writel((addr >> 8) & 0xFFFFFFFF, vfe->base + VFE_BUS_WM_IMAGE_ADDR(wm));
+
+ dev_dbg(vfe->camss->dev, "wm:%d, image buf addr:0x%x\n",
+ wm, addr);
+}
+
+static void vfe_reg_update(struct vfe_device *vfe, enum vfe_line_id line_id)
+{
+ int port_id = line_id;
+
+ camss_reg_update(vfe->camss, vfe->id, port_id, false);
+}
+
+static inline void vfe_reg_update_clear(struct vfe_device *vfe,
+ enum vfe_line_id line_id)
+{
+ int port_id = line_id;
+
+ camss_reg_update(vfe->camss, vfe->id, port_id, true);
+}
+
+static const struct camss_video_ops vfe_video_ops_780 = {
+ .queue_buffer = vfe_queue_buffer_v2,
+ .flush_buffers = vfe_flush_buffers,
+};
+
+static void vfe_subdev_init(struct device *dev, struct vfe_device *vfe)
+{
+ vfe->video_ops = vfe_video_ops_780;
+}
+
+static void vfe_global_reset(struct vfe_device *vfe)
+{
+ vfe_isr_reset_ack(vfe);
+}
+
+static irqreturn_t vfe_isr(int irq, void *dev)
+{
+ /* nop */
+ return IRQ_HANDLED;
+}
+
+static int vfe_halt(struct vfe_device *vfe)
+{
+ /* rely on vfe_disable_output() to stop the VFE */
+ return 0;
+}
+
+const struct vfe_hw_ops vfe_ops_780 = {
+ .global_reset = vfe_global_reset,
+ .hw_version = vfe_hw_version,
+ .isr = vfe_isr,
+ .pm_domain_off = vfe_pm_domain_off,
+ .pm_domain_on = vfe_pm_domain_on,
+ .reg_update = vfe_reg_update,
+ .reg_update_clear = vfe_reg_update_clear,
+ .subdev_init = vfe_subdev_init,
+ .vfe_disable = vfe_disable,
+ .vfe_enable = vfe_enable_v2,
+ .vfe_halt = vfe_halt,
+ .vfe_wm_start = vfe_wm_start,
+ .vfe_wm_stop = vfe_wm_stop,
+ .vfe_buf_done = vfe_buf_done,
+ .vfe_wm_update = vfe_wm_update,
+};
diff --git a/drivers/media/platform/qcom/camss/camss-vfe.c b/drivers/media/platform/qcom/camss/camss-vfe.c
index 1c9b6569fbe5..c95b127a7e2e 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe.c
@@ -344,6 +344,7 @@ static u32 vfe_src_pad_code(struct vfe_line *line, u32 sink_code,
case CAMSS_845:
case CAMSS_8250:
case CAMSS_8280XP:
+ case CAMSS_8550:
switch (sink_code) {
case MEDIA_BUS_FMT_YUYV8_1X16:
{
@@ -1964,6 +1965,7 @@ static int vfe_bpl_align(struct vfe_device *vfe)
case CAMSS_845:
case CAMSS_8250:
case CAMSS_8280XP:
+ case CAMSS_8550:
ret = 16;
break;
default:
diff --git a/drivers/media/platform/qcom/camss/camss-vfe.h b/drivers/media/platform/qcom/camss/camss-vfe.h
index 977710d6655e..2a2e2d82dd51 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe.h
+++ b/drivers/media/platform/qcom/camss/camss-vfe.h
@@ -242,6 +242,7 @@ extern const struct vfe_hw_ops vfe_ops_4_7;
extern const struct vfe_hw_ops vfe_ops_4_8;
extern const struct vfe_hw_ops vfe_ops_170;
extern const struct vfe_hw_ops vfe_ops_480;
+extern const struct vfe_hw_ops vfe_ops_780;
int vfe_get(struct vfe_device *vfe);
void vfe_put(struct vfe_device *vfe);
diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c
index c0e336f3916b..e8cc96d3d0d2 100644
--- a/drivers/media/platform/qcom/camss/camss.c
+++ b/drivers/media/platform/qcom/camss/camss.c
@@ -1823,6 +1823,125 @@ static const struct camss_subdev_resources csid_res_8550[] = {
}
};
+static const struct camss_subdev_resources vfe_res_8550[] = {
+ /* VFE0 */
+ {
+ .regulators = {},
+ .clock = { "gcc_axi_hf", "cpas_ahb", "cpas_fast_ahb_clk", "vfe0_fast_ahb",
+ "vfe0", "cpas_vfe0", "camnoc_axi" },
+ .clock_rate = { { 0 },
+ { 80000000 },
+ { 300000000, 400000000 },
+ { 300000000, 400000000 },
+ { 466000000, 594000000, 675000000, 785000000 },
+ { 300000000, 400000000 },
+ { 300000000, 400000000 } },
+ .reg = { "vfe0" },
+ .interrupt = { "vfe0" },
+ .vfe = {
+ .line_num = 3,
+ .is_lite = false,
+ .has_pd = true,
+ .pd_name = "ife0",
+ .hw_ops = &vfe_ops_780,
+ .formats_rdi = &vfe_formats_rdi_845,
+ .formats_pix = &vfe_formats_pix_845
+ }
+ },
+ /* VFE1 */
+ {
+ .regulators = {},
+ .clock = { "gcc_axi_hf", "cpas_ahb", "cpas_fast_ahb_clk", "vfe1_fast_ahb",
+ "vfe1", "cpas_vfe1", "camnoc_axi" },
+ .clock_rate = { { 0 },
+ { 80000000 },
+ { 300000000, 400000000 },
+ { 300000000, 400000000 },
+ { 466000000, 594000000, 675000000, 785000000 },
+ { 300000000, 400000000 },
+ { 300000000, 400000000 } },
+ .reg = { "vfe1" },
+ .interrupt = { "vfe1" },
+ .vfe = {
+ .line_num = 3,
+ .is_lite = false,
+ .has_pd = true,
+ .pd_name = "ife1",
+ .hw_ops = &vfe_ops_780,
+ .formats_rdi = &vfe_formats_rdi_845,
+ .formats_pix = &vfe_formats_pix_845
+ }
+ },
+ /* VFE2 */
+ {
+ .regulators = {},
+ .clock = { "gcc_axi_hf", "cpas_ahb", "cpas_fast_ahb_clk", "vfe2_fast_ahb",
+ "vfe2", "cpas_vfe2", "camnoc_axi" },
+ .clock_rate = { { 0 },
+ { 80000000 },
+ { 300000000, 400000000 },
+ { 300000000, 400000000 },
+ { 466000000, 594000000, 675000000, 785000000 },
+ { 300000000, 400000000 },
+ { 300000000, 400000000 } },
+ .reg = { "vfe2" },
+ .interrupt = { "vfe2" },
+ .vfe = {
+ .line_num = 3,
+ .is_lite = false,
+ .has_pd = true,
+ .pd_name = "ife2",
+ .hw_ops = &vfe_ops_780,
+ .formats_rdi = &vfe_formats_rdi_845,
+ .formats_pix = &vfe_formats_pix_845
+ }
+ },
+ /* VFE3 lite */
+ {
+ .regulators = {},
+ .clock = { "gcc_axi_hf", "cpas_ahb", "cpas_fast_ahb_clk", "vfe_lite_ahb",
+ "vfe_lite", "cpas_ife_lite", "camnoc_axi" },
+ .clock_rate = { { 0 },
+ { 80000000 },
+ { 300000000, 400000000 },
+ { 300000000, 400000000 },
+ { 400000000, 480000000 },
+ { 300000000, 400000000 },
+ { 300000000, 400000000 } },
+ .reg = { "vfe_lite0" },
+ .interrupt = { "vfe_lite0" },
+ .vfe = {
+ .line_num = 4,
+ .is_lite = true,
+ .hw_ops = &vfe_ops_780,
+ .formats_rdi = &vfe_formats_rdi_845,
+ .formats_pix = &vfe_formats_pix_845
+ }
+ },
+ /* VFE4 lite */
+ {
+ .regulators = {},
+ .clock = { "gcc_axi_hf", "cpas_ahb", "cpas_fast_ahb_clk", "vfe_lite_ahb",
+ "vfe_lite", "cpas_ife_lite", "camnoc_axi" },
+ .clock_rate = { { 0 },
+ { 80000000 },
+ { 300000000, 400000000 },
+ { 300000000, 400000000 },
+ { 400000000, 480000000 },
+ { 300000000, 400000000 },
+ { 300000000, 400000000 } },
+ .reg = { "vfe_lite1" },
+ .interrupt = { "vfe_lite1" },
+ .vfe = {
+ .line_num = 4,
+ .is_lite = true,
+ .hw_ops = &vfe_ops_780,
+ .formats_rdi = &vfe_formats_rdi_845,
+ .formats_pix = &vfe_formats_pix_845
+ }
+ },
+};
+
static const struct resources_icc icc_res_sm8550[] = {
{
.name = "ahb",
@@ -2861,11 +2980,13 @@ static const struct camss_resources sm8550_resources = {
.pd_name = "top",
.csiphy_res = csiphy_res_8550,
.csid_res = csid_res_8550,
+ .vfe_res = vfe_res_8550,
.csid_wrapper_res = &csid_wrapper_res_sm8550,
.icc_res = icc_res_sm8550,
.icc_path_num = ARRAY_SIZE(icc_res_sm8550),
.csiphy_num = ARRAY_SIZE(csiphy_res_8550),
.csid_num = ARRAY_SIZE(csid_res_8550),
+ .vfe_num = ARRAY_SIZE(vfe_res_8550),
.link_entities = camss_link_entities
};
--
2.34.1
