Hi, On Mon Dec 9, 2024 at 9:02 PM CET, Shreeya Patel wrote: > Document bindings for the Synopsys DesignWare HDMI RX Controller. > > Reviewed-by: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx> > Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx> > Reviewed-by: Rob Herring <robh@xxxxxxxxxx> > Reviewed-by: Dmitry Osipenko <dmitry.osipenko@xxxxxxxxxxxxx> > Signed-off-by: Shreeya Patel <shreeya.patel@xxxxxxxxxxxxx> > --- > > Changes in v5 :- > - Correct the interrupt IRQ number > > Changes in v4 :- > - No change > > Changes in v3 :- > - Rename hdmirx_cma to hdmi_receiver_cma > - Add a Reviewed-by tag > > Changes in v2 :- > - Add a description for the hardware > - Rename resets, vo1 grf and HPD properties > - Add a proper description for grf and vo1-grf phandles > - Rename the HDMI Input node name to hdmi-receiver > - Improve the subject line > - Include gpio header file in example to fix dt_binding_check failure > > .../bindings/media/snps,dw-hdmi-rx.yaml | 132 ++++++++++++++++++ > 1 file changed, 132 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.yaml > > diff --git a/Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.yaml b/Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.yaml > new file mode 100644 > index 000000000000..510e94e9ca3a > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.yaml > @@ -0,0 +1,132 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +# Device Tree bindings for Synopsys DesignWare HDMI RX Controller > + > +--- > +$id: http://devicetree.org/schemas/media/snps,dw-hdmi-rx.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Synopsys DesignWare HDMI RX Controller > + > +maintainers: > + - Shreeya Patel <shreeya.patel@xxxxxxxxxxxxx> > + > +description: > + Synopsys DesignWare HDMI Input Controller preset on RK3588 SoCs s/preset/present/ ? > + allowing devices to receive and decode high-resolution video streams > + from external sources like media players, cameras, laptops, etc. > + > +properties: > + compatible: > + items: > + - const: rockchip,rk3588-hdmirx-ctrler > + - const: snps,dw-hdmi-rx > + > + reg: > + maxItems: 1 > + > + interrupts: > + maxItems: 3 > + > + interrupt-names: > + items: > + - const: cec > + - const: hdmi > + - const: dma > + > + clocks: > + maxItems: 7 > + > + clock-names: > + items: > + - const: aclk > + - const: audio > + - const: cr_para > + - const: pclk > + - const: ref > + - const: hclk_s_hdmirx > + - const: hclk_vo1 > + > + power-domains: > + maxItems: 1 > + > + resets: > + maxItems: 4 > + > + reset-names: > + items: > + - const: axi > + - const: apb > + - const: ref > + - const: biu > + > + memory-region: > + maxItems: 1 > + > + hpd-gpios: > + description: GPIO specifier for HPD. > + maxItems: 1 > + > + rockchip,grf: > + $ref: /schemas/types.yaml#/definitions/phandle > + description: > + The phandle of the syscon node for the general register file > + containing HDMIRX PHY status bits. > + > + rockchip,vo1-grf: > + $ref: /schemas/types.yaml#/definitions/phandle > + description: > + The phandle of the syscon node for the Video Output GRF register > + to enable EDID transfer through SDAIN and SCLIN. > + > +required: > + - compatible > + - reg > + - interrupts > + - interrupt-names > + - clocks > + - clock-names > + - power-domains > + - resets > + - pinctrl-0 > + - hpd-gpios > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/clock/rockchip,rk3588-cru.h> > + #include <dt-bindings/gpio/gpio.h> > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + #include <dt-bindings/interrupt-controller/irq.h> > + #include <dt-bindings/power/rk3588-power.h> > + #include <dt-bindings/reset/rockchip,rk3588-cru.h> > + hdmi_receiver: hdmi-receiver@fdee0000 { > + compatible = "rockchip,rk3588-hdmirx-ctrler", "snps,dw-hdmi-rx"; > + reg = <0xfdee0000 0x6000>; > + interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH 0>, > + <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH 0>, > + <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH 0>; > + interrupt-names = "cec", "hdmi", "dma"; > + clocks = <&cru ACLK_HDMIRX>, > + <&cru CLK_HDMIRX_AUD>, > + <&cru CLK_CR_PARA>, > + <&cru PCLK_HDMIRX>, > + <&cru CLK_HDMIRX_REF>, > + <&cru PCLK_S_HDMIRX>, > + <&cru HCLK_VO1>; > + clock-names = "aclk", > + "audio", > + "cr_para", > + "pclk", > + "ref", > + "hclk_s_hdmirx", > + "hclk_vo1"; > + power-domains = <&power RK3588_PD_VO1>; > + resets = <&cru SRST_A_HDMIRX>, <&cru SRST_P_HDMIRX>, > + <&cru SRST_HDMIRX_REF>, <&cru SRST_A_HDMIRX_BIU>; > + reset-names = "axi", "apb", "ref", "biu"; > + memory-region = <&hdmi_receiver_cma>; > + pinctrl-0 = <&hdmim1_rx_cec &hdmim1_rx_hpdin &hdmim1_rx_scl &hdmim1_rx_sda &hdmirx_5v_detection>; > + pinctrl-names = "default"; > + hpd-gpios = <&gpio1 22 GPIO_ACTIVE_LOW>; I just found out it isn't documented in the DTS coding style and that the binding is technically not specifically for a Rockchip based component, but there is a convention to sort the node properties alpha-numerically by property name, with some exceptions. So would it be useful to apply that convention to the example? And possibly to the list of required properties as well? Cheers, Diederik > + };
Attachment:
signature.asc
Description: PGP signature
