Hi Shreeya, Am Montag, 9. Dezember 2024, 21:00:30 CET schrieb Shreeya Patel: > This series implements support for the Synopsys DesignWare > HDMI RX Controller, being compliant with standard HDMI 1.4b > and HDMI 2.0. could you take a look at your mail-setup please? This cover-letter came with a message-id of 01020193ad025176-f2e8e4fd-41a6-42ef-b3d0-dfa87a6d0abd-000000@xxxxxxxxxxxxxxxxxxxxxxx same for patch1 that also got an amazon-message-id and lost its in-reply-to reference, while the patches 2-4 have correct message-ids and reference 20241209200120.3228643-1-shreeya.patel@xxxxxxxxxxxxx as their parent. So it looks like some amazon service did some rewriting and broke threading :-( . Thanks a lot Heiko > Features that are currently supported by the HDMI RX driver > have been tested on rock5b board using a HDMI to micro-HDMI cable. > It is recommended to use a good quality cable as there were > multiple issues seen during testing the driver. > > Please note the below information :- > * HDMIRX driver now only works with the opensource TF-A. > * We have tested the working of OBS studio with HDMIRX driver and > there were no issues seen. > * We also tested and verified the support for interlaced video. > > To test the HDMI RX Controller driver, following example commands can be used :- > > root@debian-rockchip-rock5b-rk3588:~# v4l2-ctl --verbose -d /dev/video0 \ > --set-fmt-video=width=1920,height=1080,pixelformat='BGR3' --stream-mmap=4 \ > --stream-skip=3 --stream-count=100 --stream-to=/home/hdmiin4k.raw --stream-poll > > root@debian-rockchip-rock5b-rk3588:~# ffmpeg -f rawvideo -vcodec rawvideo \ > -s 1920x1080 -r 60 -pix_fmt bgr24 -i /home/hdmiin4k.raw output.mkv > > CEC compliance test results :- > > * https://gitlab.collabora.com/-/snippets/380 > * https://gitlab.collabora.com/-/snippets/381 > > Following is the v4l2-compliance test result :- > > root@debian-rockchip-rock5b-rk3588:~# v4l2-compliance -d /dev/video0 > v4l2-compliance 1.29.0-5278, 64 bits, 64-bit time_t > v4l2-compliance SHA: 791da13728d9 2024-11-25 10:01:57 > > Compliance test for snps_hdmirx device /dev/video0: > > Driver Info: > Driver name : snps_hdmirx > Card type : snps_hdmirx > Bus info : platform:fdee0000.hdmi_receiver > Driver version : 6.12.0 > Capabilities : 0x84201000 > Video Capture Multiplanar > Streaming > Extended Pix Format > Device Capabilities > Device Caps : 0x04201000 > Video Capture Multiplanar > Streaming > Extended Pix Format > > Required ioctls: > test VIDIOC_QUERYCAP: OK > test invalid ioctls: OK > > Allow for multiple opens: > test second /dev/video0 open: OK > test VIDIOC_QUERYCAP: OK > test VIDIOC_G/S_PRIORITY: OK > test for unlimited opens: OK > > Debug ioctls: > test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) > test VIDIOC_LOG_STATUS: OK > > Input ioctls: > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) > test VIDIOC_ENUMAUDIO: OK (Not Supported) > test VIDIOC_G/S/ENUMINPUT: OK > test VIDIOC_G/S_AUDIO: OK (Not Supported) > Inputs: 1 Audio Inputs: 0 Tuners: 0 > > Output ioctls: > test VIDIOC_G/S_MODULATOR: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_ENUMAUDOUT: OK (Not Supported) > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) > test VIDIOC_G/S_AUDOUT: OK (Not Supported) > Outputs: 0 Audio Outputs: 0 Modulators: 0 > > Input/Output configuration ioctls: > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK > test VIDIOC_DV_TIMINGS_CAP: OK > test VIDIOC_G/S_EDID: OK > > Control ioctls (Input 0): > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK > test VIDIOC_QUERYCTRL: OK > test VIDIOC_G/S_CTRL: OK > test VIDIOC_G/S/TRY_EXT_CTRLS: OK > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) > Standard Controls: 4 Private Controls: 0 > > Format ioctls (Input 0): > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK > test VIDIOC_G/S_PARM: OK > test VIDIOC_G_FBUF: OK (Not Supported) > test VIDIOC_G_FMT: OK > test VIDIOC_TRY_FMT: OK > test VIDIOC_S_FMT: OK > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) > test Cropping: OK (Not Supported) > test Composing: OK (Not Supported) > test Scaling: OK (Not Supported) > > Codec ioctls (Input 0): > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) > test VIDIOC_G_ENC_INDEX: OK (Not Supported) > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) > > Buffer ioctls (Input 0): > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK > test CREATE_BUFS maximum buffers: OK > test VIDIOC_REMOVE_BUFS: OK > test VIDIOC_EXPBUF: OK > test Requests: OK (Not Supported) > test blocking wait: OK > > Total for snps_hdmirx device /dev/video0: 48, Succeeded: 48, Failed: 0, Warnings: 0 > > > Changes in v5 :- > - Fix the interrupt IRQ number in the dt-bindings and device tree > - Add alignment property to ensure hdmi-receiver-cma > starts at a 64KB-aligned address > - Change the MODULE_DESCRIPTION > - Add VIDEO_SYNOPSYS_HDMIRX as prefix to the default edid config > - Drop the enabling of default edid in the Kconfig > - Replace the default EDID with hdmi-4k-300mhz EDID produced > by v4l2-ctl tool for better compatibility with various HDMI > cables and adapters > - Rework the write_edid and set_edid functions > - During format change, retrieve the current pixel format, > color depth, and AVI infoframe details instead of only > detecting the format > - Improve the logging mechanism and delays in the > hdmirx_wait_signal_lock function > - Fix the 4K@60 capturing for RGB format > - Document what hdmirx_check_timing_valid function does > - Rework the hdmirx_get_detected_timings function > - Fix the NV16/24 size image value > - Add the implementation from Benjamin Hoff to expose the > ITC type to v4l2 > - Remove all the firmware related code > > Changes in v4 :- > - Remove DTS changes included in the device tree patch > - Remove the hdmi rx pin info as it's already present > in the rk3588-base-pinctrl.dtsi > - Create a separate config option for selecting the EDID > and enable it by default > - Improve the comment related to DV timings and move it > to the side of hdmirx_get_detected_timings > - Add 100ms delay before pulling the HPD high > - Do not return the detected timings from VIDIOC_G_DV_TIMINGS > - Drop the bus info from hdmirx_querycap > - If *num_planes != 0 then return 0 in hdmirx_queue_setup > - Set queue->min_queued_buffers to 1 > - Drop q->allow_cache_hints = 0; as it's always 0 by default > - Add a comment for q->dma_attrs = DMA_ATTR_FORCE_CONTIGUOUS; > - Drop .read = vb2_fop_read as it's not supported by driver > - Remove redundant edid_init_data_600M > - Make HPD low when driver is loaded > - Add support for reading AVI Infoframe > - Remove msg_len checks from hdmirx_cec_transmit > - Add info about the CEC compliance test in the cover letter > - Add arbitration lost status > - Validate the physical address inside the EDID > > Changes in v3 :- > - Use v4l2-common helpers in the HDMIRX driver > - Rename cma node and phandle names > - Elaborate the comment to explain 160MiB calculation > - Move &hdmi_receiver_cma to the rock5b dts file > - Add information about interlaced video testing in the > cover-letter > > Changes in v2 :- > - Fix checkpatch --strict warnings > - Move the dt-binding include file changes in a separate patch > - Add a description for the hardware in the dt-bindings file > - Rename resets, vo1 grf and HPD properties > - Add a proper description for grf and vo1-grf phandles in the > bindings > - Rename the HDMI RX node name to hdmi-receiver > - Include gpio header file in binding example to fix the > dt_binding_check failure > - Move hdmirx_cma node to the rk3588.dtsi file > - Add an entry to MAINTAINERS file for the HDMIRX driver > > Shreeya Patel (4): > MAINTAINERS: Add entry for Synopsys DesignWare HDMI RX Driver > dt-bindings: media: Document bindings for HDMI RX Controller > arm64: dts: rockchip: Add device tree support for HDMI RX Controller > media: platform: synopsys: Add support for HDMI input driver > > .../bindings/media/snps,dw-hdmi-rx.yaml | 132 + > MAINTAINERS | 8 + > .../dts/rockchip/rk3588-base-pinctrl.dtsi | 14 + > .../arm64/boot/dts/rockchip/rk3588-extra.dtsi | 57 + > drivers/media/platform/Kconfig | 1 + > drivers/media/platform/Makefile | 1 + > drivers/media/platform/synopsys/Kconfig | 3 + > drivers/media/platform/synopsys/Makefile | 2 + > .../media/platform/synopsys/hdmirx/Kconfig | 27 + > .../media/platform/synopsys/hdmirx/Makefile | 4 + > .../platform/synopsys/hdmirx/snps_hdmirx.c | 2662 +++++++++++++++++ > .../platform/synopsys/hdmirx/snps_hdmirx.h | 394 +++ > .../synopsys/hdmirx/snps_hdmirx_cec.c | 283 ++ > .../synopsys/hdmirx/snps_hdmirx_cec.h | 44 + > 14 files changed, 3633 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.yaml > create mode 100644 drivers/media/platform/synopsys/Kconfig > create mode 100644 drivers/media/platform/synopsys/Makefile > create mode 100644 drivers/media/platform/synopsys/hdmirx/Kconfig > create mode 100644 drivers/media/platform/synopsys/hdmirx/Makefile > create mode 100644 drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c > create mode 100644 drivers/media/platform/synopsys/hdmirx/snps_hdmirx.h > create mode 100644 drivers/media/platform/synopsys/hdmirx/snps_hdmirx_cec.c > create mode 100644 drivers/media/platform/synopsys/hdmirx/snps_hdmirx_cec.h > >
