[PATCH v3 06/12] media: i2c: imx214: Check number of lanes from device tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: André Apitzsch <git@xxxxxxxxxxx>

The imx214 camera is capable of either two-lane or four-lane operation.

Currently only the four-lane mode is supported, as proper pixel rates
and link frequences for the two-lane mode are unknown.

Signed-off-by: André Apitzsch <git@xxxxxxxxxxx>
---
 drivers/media/i2c/imx214.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/media/i2c/imx214.c b/drivers/media/i2c/imx214.c
index 07926f7257877155548f7bcf0e7ee80037b4ce6c..f1c72db0775eaf4810f762e8798d301c5ad9923c 100644
--- a/drivers/media/i2c/imx214.c
+++ b/drivers/media/i2c/imx214.c
@@ -199,7 +199,6 @@ struct imx214 {
 
 /*From imx214_mode_tbls.h*/
 static const struct cci_reg_sequence mode_4096x2304[] = {
-	{ IMX214_REG_CSI_LANE_MODE, IMX214_CSI_4_LANE_MODE },
 	{ IMX214_REG_HDR_MODE, IMX214_HDR_MODE_OFF },
 	{ IMX214_REG_HDR_RES_REDUCTION, IMX214_HDR_RES_REDU_THROUGH },
 	{ IMX214_REG_EXPOSURE_RATIO, 1 },
@@ -272,7 +271,6 @@ static const struct cci_reg_sequence mode_4096x2304[] = {
 };
 
 static const struct cci_reg_sequence mode_1920x1080[] = {
-	{ IMX214_REG_CSI_LANE_MODE, IMX214_CSI_4_LANE_MODE },
 	{ IMX214_REG_HDR_MODE, IMX214_HDR_MODE_OFF },
 	{ IMX214_REG_HDR_RES_REDUCTION, IMX214_HDR_RES_REDU_THROUGH },
 	{ IMX214_REG_EXPOSURE_RATIO, 1 },
@@ -788,6 +786,13 @@ static int imx214_start_streaming(struct imx214 *imx214)
 		return ret;
 	}
 
+	ret = cci_write(imx214->regmap, IMX214_REG_CSI_LANE_MODE,
+			IMX214_CSI_4_LANE_MODE, NULL);
+	if (ret) {
+		dev_err(imx214->dev, "%s failed to configure lanes\n", __func__);
+		return ret;
+	}
+
 	ret = cci_multi_reg_write(imx214->regmap, imx214->cur_mode->reg_table,
 				  imx214->cur_mode->num_of_regs, NULL);
 	if (ret < 0) {
@@ -948,6 +953,13 @@ static int imx214_parse_fwnode(struct device *dev)
 		goto done;
 	}
 
+	/* Check the number of MIPI CSI2 data lanes */
+	if (bus_cfg.bus.mipi_csi2.num_data_lanes != 4) {
+		ret = dev_err_probe(dev, -EINVAL,
+				    "only 4 data lanes are currently supported\n");
+		goto done;
+	}
+
 	for (i = 0; i < bus_cfg.nr_of_link_frequencies; i++)
 		if (bus_cfg.link_frequencies[i] == IMX214_DEFAULT_LINK_FREQ)
 			break;

-- 
2.47.1






[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux