Hi Sakari On Fri, Nov 29, 2024 at 11:51:35AM +0200, Sakari Ailus wrote: > Add a hyphen to list-based for uniform spelling in camera-sensor.rst. > > Signed-off-by: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx> Reviewed-by: Jacopo Mondi <jacopo.mondi@xxxxxxxxxxxxxxxx> > --- > Documentation/userspace-api/media/drivers/camera-sensor.rst | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/Documentation/userspace-api/media/drivers/camera-sensor.rst b/Documentation/userspace-api/media/drivers/camera-sensor.rst > index 8e1083417ae1..9a1e8aa9fc77 100644 > --- a/Documentation/userspace-api/media/drivers/camera-sensor.rst > +++ b/Documentation/userspace-api/media/drivers/camera-sensor.rst > @@ -26,10 +26,10 @@ of cropping and scaling operations from the device's pixel array's size. > > An example of such a driver is the CCS driver. > > -Register list based drivers > +Register list-based drivers > ~~~~~~~~~~~~~~~~~~~~~~~~~~~ > > -Register list based drivers generally, instead of able to configure the device > +Register list-based drivers generally, instead of able to configure the device > they control based on user requests, are limited to a number of preset > configurations that combine a number of different parameters that on hardware > level are independent. How a driver picks such configuration is based on the > @@ -67,7 +67,7 @@ is pixels and the unit of the ``V4L2_CID_VBLANK`` is lines. The pixel rate in > the sensor's **pixel array** is specified by ``V4L2_CID_PIXEL_RATE`` in the same > sub-device. The unit of that control is pixels per second. > > -Register list based drivers need to implement read-only sub-device nodes for the > +Register list-based drivers need to implement read-only sub-device nodes for the > purpose. Devices that are not register list based need these to configure the > device's internal processing pipeline. > > -- > 2.39.5 > >
